Operating Instructions

23
DVQX1725
English
Attaching the Lens
For information on how to attach the lens, refer to the
operating instructions for your digital camera.
0 Attach the lens after turning off the digital camera.
0 Attach the lens after removing
the lens rear cap.
0 After removing the lens from the
digital camera, be sure to attach
the lens cap and lens rear cap to
prevent dust and other particles
from accumulating on or entering
the lens.
∫ Attaching the lens hood
1 Align mark A ( ) on
the lens hood with the
mark on the tip of the
lens.
2 Rotate the lens hood in
the direction of the
arrow to align mark B
( ) on the lens hood
with the mark on the tip
of the lens.
0
Attach the lens hood by
rotating it until it clicks.
∫ Removing the lens hood
While pressing the lens
hood button, rotate the
lens hood in the direction
of the arrow and then
remove it.
Note
0 When carrying, the lens hood can be attached in the
reverse direction.
1 Remove the lens hood.
2 Align mark C ( ) on the lens hood with the mark
on the tip of the lens.
3 Attach the lens hood by rotating it in the direction of
the arrow until it clicks.
0 It is recommended to remove the lens hood during
flash photography as the lens hood can block the light
from the flash.
0 To prevent dropping of the lens, you should never carry
the lens by just holding the lens hood.







S-R70200-DVQX1725ZC.book 23 ページ ２０２２年２月２４日 木曜日 午後１時２９分