Operating Instructions

11
You can input analogue audio signals to this unit and play back music.
*1 When connecting to a record player with a built-in PHONO equalizer, connect its cable to the analogue audio input terminal [LINE IN].
*2 When connecting a record player with a ground wire, connect the ground wire to the PHONO EARTH terminal [PHONO EARTH] of this unit.
You can input digital audio signals to this unit and play back music.

≥ The digital audio input of this unit supports only the linear PCM (LPCM) signals listed below. For details, refer to the operating instructions of the
connected device.
Connecting to analogue audio output devices
e.g.,
Record player*
1
This unit (rear) Blu-ray Disc player, etc.
Audio cable
(not supplied)
Audio cable
(not supplied)
Connecting to digital audio output devices
e.g.,
CD player, etc. This unit (rear) CD player, etc.
Optical digital audio cable
(not supplied)
Coaxial digital cable
(not supplied)
Input terminal Sampling frequency Number of quantization bits
Coaxial digital input 32/44.1/48/88.2/96/176.4/192 kHz 16/24 bit
Optical digital input 32/44.1/48/88.2/96 kHz 16/24 bit
*2
SU-C700-SQT0487_EBGN_mst.book 11 ページ ２０１５年６月１５日 月曜日 午前９時２０分