SD Media Storage Operating Instructions Model No. SV-PT1PP Before attempting to connect, operate or adjust this product, please read these instructions thoroughly. For USA assistance, please call: 1-800-272-7033 or send e-mail to: digitalstillcam@panasonic.com For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca LSQT0622A PT1.p1-5.
Information For Your Safety Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic SD Media Storage. Please read these Operating Instructions carefully and keep them handy for future reference. Information for Your Safety WARNING TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES AND DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE.
Information For Your Safety FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables with ferrite cores when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Trade Name: Panasonic Model No.
End User License Agreement Before opening the CD-ROM package, please read the following. End User License Agreement You (“licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
Table of Contents Before Use Before Use Copy Mode Information For Your Safety .................................................................... 2 End User License Agreement ................................................................. 4 Things You Should Know ........................................................................ 7 Operating Precautions ............................................................................ 8 • Main Unit and Battery ..........................................
Table of Contents Slide Show Settings • Selecting Images ................................................................................. 30 • Setting Screen Transition Effects/Speed ............................................. 31 Presentation • Performing Presentation ...................................................................... 32 • Selecting Presentation Content ........................................................... 33 Editing • Deleting Images (DELETE) ...................................
Things You Should Know Before Use Main Features ● This unit is a compact, lightweight portable media storage unit. ● The generous 5 GB HDD allows ample storage for your still images. ● Stored images can be viewed and edited (delete, copy, etc.) on a TV at home or elsewhere. ● This unit can serve as an external drive by connecting the USB port to your PC. ● Still images can be played back from a variety of cards *1 and copied to an SD Memory Card. *1 Each type of card requires a compatible adaptor.
Operating Precautions Carefully read these precautions prior to use and strictly observe them during unit operation. Failure to do so may result in product malfunction or damage. Also, disregarding these precautions could cause damage to, or loss of, data stored within the media. • Do not leave this unit in direct sunlight, inside tightly closed vehicles, in extremely hot or cold places, or near heaters or air conditioners. Avoid rapid temperature changes.
Operating Precautions (Refer to page 10 for details on compatible cards.) • Do not unplug the AC adaptor or disconnect the USB cable connecting a PC while this unit is in operation. • Do not remove the card while it is being accessed. • Be sure the card does not contain important data before formatting it. Formatting irreversibly deletes all data stored on the card. • Do not touch the terminals on the back of the Memory Card.
Before Using • Photographs and printed materials may not be used except for personal and private applications without authorization from the copyright owner. : SD logo is a trademark. • • Microsoft®, Windows® and PowerPoint® are registered trademarks of Microsoft in the United States and other countries. • Other product names, trade names and company used in this manual are trademarks or registered trademarks of their respective owners.
Before Using When copying from a Memory Card to the PC Card HDD, create a folder entitled “CARD****” for each copy and save Memory Card data into this folder. When BACKUP is ON, the “CARD****” folder mentioned above is created in the “BACKUP” folder of the PC Card HDD, and Memory Card data is copied into this folder. Thus, normal PC Card HDD available space is reduced by half. See page 20 on how to turn the BACKUP function ON and OFF.
Before Using Copying and Backup (Continued) Copying: PC Card HDD -> Memory Card The folder entitled “CARD****” will disappear and data will be copied according to the file structure rules. Memory Card PC Card HDD ROOT CARDA001 ROOT MISC MISC DCIM DCIM CARDA002 ROOT PHOTO PHOTO CARDA003 ROOT MISC MISC DCIM DCIM AAA. JPG BBB. TXT CCC. EXE AAA. JPG BBB. TXT CCC. EXE BACKUP CARDA001 CARDA002 CARDA003 Data files will not be copied.
Selecting Modes Memory Card PC Card HDD (Or other card) TV Mode (pp. 24~41) In TV mode, you can connect the unit to a TV and then carry out playback and edit operations (such as copying, deleting, protecting, zooming, rotating and enhancing colors) for the data stored on a card while viewing the data on a TV screen. * Only JPG, TIF, and MOV type files can be displayed. Other files require the unit to be in PC Mode. or Video Cable Memory Card PC Card HDD (Or other card) TV PC Mode (pp.
Index Of Controls Liquid Crystal Display Front View The LCD indicates the current operating (TV, Copy) mode. • In Copy mode, displays battery level, data transfer progress, and various menus. (pp. 18~23) • With USB cable connection, displays card selection options. (p. 44) Hand Strap Attachment Pin Attach hand strap here. (p. 15) Cursor Buttons ( ) Moves the cursor up, down, left and right. POWER Lamp MENU Button Lights when power is ON. Flashes during battery recharge. Displays/Clears menu.
Carrying the Unit Before Use Attaching the Hand Strap 1 Insert strap end loop into gap of Attachment Pin. 2 Thread opposite end through the end loop and pull strap tight in the direction of arrow. Caution • This unit is a precision device. When carrying this unit, ensure that it does not swing excessively. Do not drop this unit or subject it to strong impacts. Using the Carrying Case 1 Open the carrying case. 2 Insert this unit into the lower compartment.
Recharging the Battery Pack The battery pack can be recharged right inside this unit using the supplied AC adaptor. Unit power must be turned OFF before recharging. Charging will stop if unit power is turned on. 1 Slide the battery To remove the Battery : Use your fingertip to push down on the catch. cover slightly to the right and swing open. 1 2 Insert the battery 2 (labeled side up) all the way into the battery compartment. Catch 3 Close the cover.
Inserting the Card Set STANDBY to OFF when inserting or removing a Card. To remove Card : Open card door. Press in lightly on card then release. 1 Push up slightly on card door to swing open. 2 Insert the Memory Card (labeled side up, cropped corner right) and hold in place until you hear a click. cropped corner 3 Close the lid. 1 2 PC Card Slot 1 Slide the lever to open the To remove Card : Press EJECT TAB twice. cover. 2 Insert the PC Card HDD or PC Card all the way into the slot.
Turning the Power On In case of a power outage, the unit utilizes the supplied battery as a backup in order to protect the unit and the card data. If you are using the AC adaptor, insert a sufficiently charged battery before turning on the power. The unit cannot be used if only the AC adaptor is used. 1 Insert the battery and connect the AC adaptor. (p. 16) • The unit can be operated using only the battery, but when using PC mode, the AC adaptor must be connected, otherwise the unit will not turn on.
Copy Mode (Display Indicator) In Copy mode, data can be copied from one card to another. You can also check card storage capacity, make backups, set TV POWER Lamp formats, and format cards. Liquid Crystal If unit is on battery power only, power shuts off Display automatically if you perform no operation for COPY/TV 5 minutes to conserve battery. MODE CA MENU Copy Mode COPY TV MODE ME N U NC E L /SET STANDBY/SET Displaying Menu (Indicator Flowchart) Follow these steps to display menus in COPY mode.
Copy Mode (Menus) COPY/TV MODE Liquid Crystal Display COPY TV MODE ME N U CA MENU CANCEL NC E L /SET STANDBY/ SET PC Card HDD (PC Card) Slot Memory Card Slot • Card Storage Capacity Check (MEDIA CAPACITY) This lets you confirm card storage capacity. • PC Card HDD available space is approx. 4.6 GB. (Example) • BACKUP (BACKUP ON/OFF) Set to ON, a backup folder containing your data is automatically created when copying. Useful where data may become accidentally deleted or corrupt.
Copy Mode (Copying) All the data can be copied from a Memory Card to the PC Card HDD (PC Card) in a single operation. Also, data within specific folders can be copied from the PC Card HDD (PC Card) to a Memory Card by selecting the desired folders to be copied. Be sure both a PC Card HDD (PC Card) and a Memory Card are inserted. 1 Display the Copy menu. (p. 19) • Press MENU to display the menu. (p.
Formatting Cards Normally you need not format (initialize) the SD Memory Card and PC Card HDD. An SD Memory Card that has been formatted to FAT32* specifications cannot be used, so transfer any important data to a PC, then format the card on this unit. Format the SD Memory Card 1 Display the menu. (p. 19) • See page 20 for menu details. 2 Press to select “SDFORMAT”, then press SET. 3 Press to select “YES”, then press SET. • Selected item flashes until SET is pressed. • Press MENU to redisplay menu.
Formatting Cards Format the PC Card HDD The product numbers for cards that can be formatted using the unit are given below. Card product numbers not listed cannot be formatted (as of Oct. 1, 2002). Matsushita Toshiba Melco Io Data Logitech Kingston •RP-PH005A •PAMHD002 •RHDC-2G •LPM-HD2G •DP-PCM2/ Devices •PAMHD005 •RHDC-5G •PCHDT-2Gt •PCHDT-5Gt •LPM-HD5G 2GB •DP-PCM2/ 5GB Copy Mode 1 Display the menu. (p. 19) • See page 20 for menu details. 2 Press to select “HDD-FORMAT”, then press SET.
TV Mode (Setup) You can view DSC photos and PC presentation files on a TV when it is connected to this unit. Refer to next page for available functions in TV Mode. Setup (Connections) 1 Connect the Video Cable. • Connect this unit to either the S-Video or the video input terminal of your TV. 2 Turn on the TV and set it to VIDEO mode. • See your TV manual. COPY TV MODE 3 Insert the Card into the unit. (p. 17) 4 Set COPY/TV MODE to “TV”. 5 Insert the battery and connect the AC adaptor. (p.
TV Mode (TV Mode Functions) Initial Screen The screen below is displayed when a card is inserted. If “NO CARD” appears, confirm that a card is correctly inserted. Folder Hierarchy Indicator Menu Area Card Selection Choose card type, HDD/PC Card • SD to select Memory Card. Press card for display, then press SET. • When folders are opened within the index, the number of these icons will increase to indicate the level within the hierarchy.
TV Mode (Display Information) Displayable Image Formats Images of the following formats can be displayed. • DCF format 1.1 compliant • Baseline JPEG format Y Cb Cr (compressed format) (Sampling ratios 4:4:4, 4:2:0, 4:2:2, 4:1:1) (80 x 60 ~ 5120 x 3840 pixels) • TIFF format RGB (RGB 8 bit non-compressed) (This image format takes longer to be displayed.
TV Mode (Image Display) Viewing Images in the Index 1 Press to select the card used, then press SET. 2 Select “IMAGE DISPLAY”, then press SET. • Index Area is displayed with cursor at first position. 3 Press to scroll to other index pages if necessary. To view folder contents: to move cursor to a folder, Press then press SET. – Note – • To display images in full screen, move cursor over a file and press SET. (p. 38) TV Mode Using the Sub Menu 1 Move cursor over the Index Area and press MENU.
TV Mode (Album) Images in the index can be displayed on a TV screen in groups of 6 or 9 at a time, like a photo album. 1 Press to select “ALBUM”, then press SET. • Only images in the Index Area can be displayed as an album. Images in a folder must first be displayed in the index. (p. 27) 2 Press MENU. • The menu screen will be displayed. 3 Press to select “6 IMAGES” or “9 IMAGES”, then press SET. To go to next or previous pages: Press for next page. Press for previous page.
TV Mode (Slide Show) You can display selected images as a Slide Show in a variety of transition effects and speeds. ME N U CA MENU CANCEL NC E L /SET SET Performing Slide Show 1 Press to select “SLIDE SHOW”, then press SET. TV Mode • Only images in the Index Area are displayed as a Slide Show. Images in a folder must first be displayed in the index. (p. 27) 2 Press MENU. 3 Press to select “SLIDE SETUP”. “SELECT” “EFFECT” “SPEED” (p. 30) (p. 31) (p.
TV Mode (Slide Show Settings) The SLIDE SETUP setting allows you to specify which images to display in a Slide Show. (p. 29) ME N U CA MENU NC E L /SET SET Selecting Images Specify the images in the index to be included in the Slide Show. If you wish to include all images in the index, this procedure is not necessary. 1 Do Steps 1~3 on page 29. In Step 3, press to select “SELECT”. 2 Press SET. • The cursor will move to the beginning of the index. 3 Press to select an image, then press SET.
TV Mode (Slide Show Settings) Setting Screen Transition Effects 1 Do Steps 1~3 on page 29. In Step 3, press to select “SELECT”. 2 Press to select “EFFECT”, then press SET. 3 Press for desired transition effect, then press SET. • NORMAL : images change one by one. • WIPE : images change from top to bottom. • SPLIT : images change from middle to each side. • BLIND : images change in a window blind fashion. 4 Press to return to “SLIDE SETUP”.
TV Mode (Presentation) Microsoft PowerPoint data created on a PC can be converted into JPEG files using the supplied JPEG Addin Software and then presented on the TV. See pages 46 and 47 on how to create presentation files. ME N U CA MENU CANCEL NC E L /SET SET Performing Presentation 1 Press to select “PRESENTATION”, then press SET. • Make sure a folder (pink) containing presentation files exists in the index. 2 Press MENU. 3 Press to select “START”, then press SET.
TV Mode (Presentation) Selecting Presentation Content You can select specific slides from the index to be displayed. If you wish to include all images in the index, this procedure is not necessary. 1 Do Steps 1~3 on page 32. In Step 3, select “SET CONTENTS”, then press SET. 2 Press to select a folder, then press SET. • Folder contents will be displayed. 3 Press to select “SLIDE SELECT”, then press SET. • Selecting “RETURN” displays previous slide. 4 Press to select a slide, then press SET.
TV Mode (Editing) You can delete images from a card, copy data from one card to another, and protect data from being deleted accidentally. ME N U CA MENU NC E L /SET SET Deleting Images (DELETE) 1 Press to select “EDIT”, then press SET. 2 Press MENU. • The Menu screen will be displayed. 3 Press to move the cursor to the right. Press to select “SELECT” or “ALL”, then press SET. • SELECT : To select specific images and folders to be deleted.
TV Mode (Editing) Copying Images (COPY) Copy data from one card to another. A card to receive copied data must be inserted. 1 Press to select “EDIT”, then press SET. 2 Press MENU. • The Menu screen will be displayed. 3 Press press right. to select “COPY”, then to move the cursor to the 4 Press to select “SELECT” or “ALL”, then press SET. TV Mode • SELECT : To select specific images and folders to be copied*. • ALL : To copy* all images/folders displayed in the index.
TV Mode (Editing) Protecting Images (PROTECT) Important file data can be protected from accidental deletion. 1 Press to select “EDIT”, then press SET. 2 Press MENU. • The Menu screen will be displayed. 3 Press then press the right. to select “PROTECT”, to move the cursor to 4 Press to select “SELECT” or “ALL”, then press SET. • SELECT : To select specific images and folders to protect*. • ALL : To protect* all images/folders displayed in the index.
TV Mode (Editing) ME N U CA MENU NC E L /SET SET How to Select Images Select image files for the DELETE, COPY, and PROTECT functions. The example screens below depict deleting an image. TV Mode 1 Press to select an image, then press SET. • Pressing SET again cancels selection. • “ ” appears in the bottom, right corner of the selected image. • Repeat Step 1 until all desired images are selected. 2 Press MENU when image selection is finished. • Pressing MENU again resumes selecting operation.
TV Mode (Full Screen Playback) When in image display or album mode, you can view an image full screen. Also, you can use zoom, rotate, add color effects, display image information, and delete the image. ME N U CA MENU NC E L /SET SET Selecting Images Display an Image (from the index) 1 Display the index. (p. 27) 2 Press to select a file, then press SET. • Image is displayed in full screen. To display the next image: Press to display next image in the current index. • Press for previous image.
TV Mode (Full Screen Playback) Displaying the Sub Menu With a full screen index or album image displayed, you can zoom, rotate, add color effects, and display image information. Press MENU to display the sub menu for function selection. • Selecting “RETURN”, then pressing SET redisplays the index or album. • Sub menu functions are described on pages 39~41. Before operating any function, press MENU for Sub Menu. Enlarging an Image (ZOOM) Images can be displayed 2 or 4 times their normal size.
TV Mode (Full Screen Playback) ME N U CA MENU NC E L /SET SET Rotating an Image (ROTATE) 1 Press to select “ROTATE” from the sub menu, then press SET. (p. 39) 2 Press to select “LEFT” or “RIGHT”, then press SET. • LEFT : image is rotated 90° counterclockwise. • RIGHT : image is rotated 90° clockwise. To save rotated images: Select “SAVE” from the rotate menu, then press SET. • Image will hereafter be displayed in the saved form.
TV Mode (Full Screen Playback) Processing Image Color (COLOR EFFECT) You can change the image color. 1 Press to select “COLOR EFFECT” from the sub menu, then press SET. (p. 39) 2 Press to select “B/W” or “SEPIA”, then press SET. • The image color will change. • Selecting “RETURN”, then pressing SET restores image’s original coloration. TV Mode Displaying Image Information (PROPERTIES) File name, date, and size are always displayed on all full screen images.
PC Mode (Setup) By connecting this unit to a PC via the supplied USB cable, it can be utilized as an external drive. System Requirements System requirements are shown below. Compatible PC Models • PC / AT compatible (PCs with USB port) OS Compatibility • Windows® 98SE • Windows® 2000 • Windows® Me • Windows® XP PC must come factory equipped with a USB port and preinstalled with one of the OS listed above. • For Windows 98SE, a CD-ROM drive is required to install the driver.
PC Mode (USB Driver) Installing the USB Driver (Only for Windows 98SE) 1 Make connections following “Setup (Connections)” steps on page 42. • The “Add New Hardware Wizard” screen is displayed. 2 Insert the supplied CD-ROM into the PC’s CD-ROM drive. 3 In the “This wizard searches for new drivers for:” dialog box, click on 1 [Next]. 4 With “Search for the best drive for your 1 2 device. [Recommended]” checked, click on 2 [Next]. 5 With “CD-ROM drive” checked, click on 3 [Next].
PC Mode (Operation with the PC) When this unit is connected to a PC using the USB Cable provided (p. 42), it will be recognized as a Removable Disk. You can then copy, move, delete, and display files on this unit the same as with a normal disk drive. SD Lamp HDD Lamp Liquid Crystal Display ME N U CA NC E L /SET SET File Operations 1 Make connections following “Setup (Connections)” steps on page 42. 2 Select and change to another card.
PC Mode (Operation with the PC) Disconnecting Unit from PC 1 Confirm SD and HDD Lamps are out and card is not being accessed. 2 Click on [Safety Remove Hardware] icon in the desktop task tray. 3 Select [USB Mass Storage Device] and click [Stop]. • For Windows Me, “Unplug or eject hardware” will be displayed. • The message “Stop a Hardware device” will be displayed. • If this unit is disconnected from the PC while an application is running, an error message may appear.
PC Mode (Using the Applications) The included CD-ROM contains a “JPEG Addin Software” application which converts Microsoft PowerPoint data created on a PC into JPEG files and creates a presentation folder (p. 47) for TV screen presentation (pp. 32, 33). • Recommended for use with a 300 MHz or higher CPU (or equivalent CPU) and at least 128 MB of memory. Also, Microsoft® PowerPoint® 97/2000/2002 must be installed prior to use. Installation 1 Turn on the PC and start Windows.
PC Mode (Using the Applications) Presentation File Creation 1 Install JPEG Addin Software (p. 46), then start PowerPoint on the PC. 2 Select [Open] from [File] menu to open a PowerPoint file for JPEG conversion. 3 Connect PC using supplied USB cable. (p. 42) 4 Click in the upper, left corner. (p. 46) • If “Drive not found.” appears, click [OK]. 5 Select “Removable Disk” as the save destination.
PC Mode (Other) Uninstalling JPEG Addin Software For Windows XP, log in with the same username used when software was installed. 1 Click “Start”, “Settings”, and “Control Panel”. • For Windows XP, Click “Start” and “Control Panel”. 2 Double-click “Add/Remove Programs”. • For Windows XP, click “Add or Remove Programs”. • A list of the programs that are currently installed will be displayed. 3 Select “JPEG Addin Software”, then click [Add/Remove]. • For Windows Me/XP, click [Change/Remove].
PC Mode (Other) HDD SAFETY Switch Operation When using a USB connection, place the unit device on a flat, level surface. If the HDD SAFETY switch is activated, carry out the following remedies. ● For Windows 98SE/Me If the HDD SAFETY Detection Switch is activated while a PC Card HDD is being accessed, the PC screen goes blue and the following message appears.
Warning and Instruction Displays Copy Mode (Liquid Crystal Display) Indications PLEASE INSERT BATT. Condition Insert battery. Power will not turn on without battery inserted. NO CARD Insert the card. NO DATA No data is stored on the card. INIT ERROR FORMAT ERROR An error has occurred during initialization of the HDD/PC Card. Turn off the power, then reinsert the card. If error occurs again, format the card (p. 23), then reinsert it. If error still occurs, card may be damaged.
Warning and Instruction Displays PC Mode (Liquid Crystal Display) Indications CONNECT AC CANNOT CHANGE SLOT INSERT BATT. DISCONNECT USB PULL OUT USB CABLE MODE CHANGE PLEASE WAIT Condition Connect the AC adaptor. Selection cannot be changed between a PC Card HDD/PC Card and an SD Memory Card during data transfer between the unit and a PC. Wait for transfer to finish, then make your selection. Insert the battery. Data transmission was interrupted. Disconnect the USB cable.
Warning and Instruction Displays TV Mode (TV Screen Display) Indications COPY ERROR DELETE ERROR PROTECT ERROR CAN’T READ SETTING FILE CAN’T DISPLAY FOR HDD SAFETY PUT UNIT DOWN THIS FILE ISN’T EXIF CAN’T SAVE THIS FILE NO SUPPORT FAT32 SD CARD CANNOT SELECT Condition The specified operation did not execute correctly. Reset the unit (see below), or turn power off, then back on and repeat the operation. An image file could not be displayed. The file is corrupt or the format is incompatible.
Before Requesting Service If a problem should arise, you may be able to correct it yourself using the corrections listed below. If the problem persists, contact your nearest Servicenter. Symptom Correction Unit does not power up... • Be sure the battery and AC adaptor are connected properly. • Use a fully recharged battery. • Press STANDBY for at least 2 seconds. Power is on, but unit turns off after a short period... • Use a fully recharged battery.
Before Requesting Service Symptom Correction No images are displayed, even • Set COPY/TV MODE to “TV.” though this unit is connected to • Connect video cable properly. a TV... • Set TV input to Video. See TV manual. • The USB cable must be disconnected to view images on a TV. • Confirm that TV format is NTSC from Copy mode. • Insert card correctly. • Files with extensions other than .JPG, .TIF and .MOV, and files that contain corrupt data, cannot be displayed.
Specifications 55 PT1.p50-56.p65 55 2003/01/14, 12:37 For Your Information Power Supply: DC 4.8 V (AC Adaptor) / DC 3.7 V (Battery) Power Consumption: 2.2 W (AC Adaptor) (peak 3.4 W) 2.2 W (Battery) (peak 2.9 W) Compatible Memory Cards SD Card Slot: SD Memory Card, MultiMediaCard PC Card Slot: PC Card HDD (2 GB, 5 GB) SD Memory Card * MultiMediaCard * CF Card* Smart Media* Memory Stick* Microdrive (340 MB, 1 GB)* * Each type of Memory Card requires a compatible adaptor.
Specifications Video Output: Composite Output : NTSC format / PAL format, 1 V p-p, 75 ohm S-Output : Y and C signals, NTSC format / PAL format, 1 V p-p, 75 ohm Dimensions: 73 (W) x 25.8 (H) x 107.5 (D) mm 2-14/16 (W) x 1 (H) x 4-4/16 (D) inch Weight: 5.63 oz / 160 g (Not including PC Card HDD and battery pack) Operating Weight: 8.8 oz / 250 g Operating Temperature: 32 F ~ 95 F (0 °C ~ 35 °C) Operating Humidity: 10 % ~ 80 % Battery Life: Continuous use Approx. 80 minutes in Copy mode Approx.
Accessory Order Form Please photocopy this form when placing an order. 1. SD Media Storage Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check or Money Order enclosed (NO C.O.D.SHIPMENTS) VISA Credit Card # MasterCard Expiration Date Discover Customer Signature Make Check or Money Order to: PANASONIC ACCESSORIES (Please do not send cash) 4.
Request for Service Notice Please photocopy this form when making a request for service notice. In the unlikely event this product needs service. Request for Service Notice: • Please include your proof of purchase. (USA Only) (Failure to due so will delay your repair.) • To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting. Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Services Company 1705 N.
Customer Serivces Directory (For USA Only) For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquiries please contact: 1-800-272-7033, Monday-Friday 8:30am-8pm EST. Web Site: http://www.panasonic.com You can purchase parts, accessories or locate your nearest servicenter by visiting our Web Site.
Limited Warranty (For USA Only) PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA, One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO INC. Ave. 65 de Infanteria, Km. 9.
Carry-In or Mail-In Service For Carry-In or Mail-In Service in the United States call 1-800-272-7033. For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910. Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 P Panasonic Sales Company (“PSC”), Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infanteria, Km. 9.5 San Gabriel Industrial Park Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, ON, L4W 2T3 PT1.p57-62.