Operating Instructions - Language - English

Preparation
12
1212
12
Inserting a Card
ª When using an SD Memory Card or a
MultiMediaCard
1
Insert the card all the way into the slot.
≥The Card Access Lamp lights.
[Removing the Card]
1
11
1
Push the card.
2
22
2
Remove the card.
ª When Using a PC Card
1
Insert CF Card all the way into
1
(PC Card Adaptor/
Product Sold Separately).
2
Insert
1
into the Photo Printer.
[When Removing the Card Adaptor]
1
11
1
Press
2
.
2
22
2
Remove
1
.
≥Never take the card out or turn off the power while the card is being
accessed. This could damage the format of the card and make it
unusable.
≥Insert/remove cards only when the power is off.
≥Card images are formatted as JPEG baselines (JFIF, EXIF, DCF
[Design rule for Camera File system], CIFF, SISRIF) TIFF (Baseline
TIFF Rev.6.0RGB Full Colour Images compatible). (Some types
cannot be fully used)
≥Do not insert/remove only the card with the card adaptor inserted.
Inserting Paper
1
Open the lid of the paper cassette (included)
1
, spread
out
2
, and stand up (or push down)
3
.
≥When using 9 x 12 cm printing paper or 16 Pre-Cut Adhesive
printing paper, spread
2
, and stand up
3
.
≥When using 10 x 15 cm printing paper, spread
2
, and push down
3
.
2
Face the white (print) side of the paper up, and insert
under
4
(
5
is the perforation line).
3
While opening the paper cassette door
6
and pushing
the Photo Printer with your hand, insert the paper
cassette all the way into
7
.
≥Insert up to 25 sheets of 9 x 12 cm printing paper, or up to 36 sheets of
the other types of paper.
≥Do not pull out the paper cassette during printing.
≥Pull out the paper cassette and close the paper cassette door after
use.
≥Do not fold, bend, or turn paper upside down when inserting into
printer.
≥If you do not insert the paper cassette all the way, when pressing the
[PRINT] button, the error message of [There is no paper cassette] is
displayed.
1
2
1
2
3
5
4
6
7
SV-AP10B.book 12 ページ ２００２年９月１８日 水曜日 午前８時５５分