Operating Instructions - Language - English

Changing the display
6 7
This function stops the unit from
responding when a button is
pressed.
It prevents the following:
• The unit turning on unexpectedly,
causing the battery to go dead.
• Play being interrupted when a
button is accidentally pressed.
Only SV-SD85 for Asia
You can get up to 50 hours of play
by using the rechargeable battery
and dry cell battery together.
When the indicator flashes, charge
the rechargeable battery or replace
the dry cell battery.
G
Battery indicator
To extend play time
F
Hold function
Other operations
Listening
H
1 Set the mode switch to
NORMAL.
2 Connect the stereo
earphones firmly.
3 Insert an SD Memory Card
with tracks recorded.
a
4 Press [ ].
The unit comes on and starts play
.
5 Press [ ] or [ ] to adjust
the volume.
Press and hold to adjust
continuously.
Note:
The following can occur if there is a
problem with the card:
• “Now Busy” or “EMERGENCY
STOP” appears on the display
frequently
• “Please Wait” appears on the
display for 20 seconds or longer
• No sound continues for 20 seconds
or longer after pressing [ ] to
play
You can remedy the problem by
formatting the card with SD-Jukebox.
Before formatting the card, check in
any data on the card to your computer.
See the operating instructions for SD-
Jukebox for details.
3 Press [ ] to play the track.
Repeat play and Random
play
Press [ ] during play at the
MODE position ( ).
Each time you press the button, play
mode will change.
N
: 1-track repeat
: All-track repeat
: All tracks played once
in random order
no display: Cancel
O
After changing, set the mode
switch to NORMAL ( ).
Q
Changing sound quality
Press [ ] during play at the
MODE position ( ).
Each time you press the button,
sound quality will change.
N
: Normal
: Adds powerful bass
: Further increases the
power of the bass
: Reduces sounds that
may annoy others
P
After changing, set the mode
switch to NORMAL ( ).
Q
Using playlists
1 Press [ ] during play at
the MODE position.
()
“” flashes and the total number
of playlists is displayed.
2 Press [ ].
3 Press [–] or [+] to select the
playlist number .
The number of tracks and the
total play time in the playlist and
the playlist title are displayed.
4 Press [ ].
The tracks in the playlist are played.
• If you select a playlist while the
unit is stopped, press [ ] to
start play.
• To play all the tracks on the SD
Memory Card, select “ ” (default
playlist) in step 3.
• If you want to stop the above
operation partway, set the mode
switch to NORMAL.
After changing, set the mode
switch to NORMAL.( )
Q
e
d
c
b
a
N
R
After stopping play, open the card
cover, and push on the center of the
card to unlock it.
To remove the SD Memory Card
I
Press [ ].
The unit turns off about ten seconds
later.
Resume
When you next press [ ], play
resumes from where you stopped it.
Play starts from track 1 if you
replace the card or battery.
To stop play and turn the
unit off
If the unit is left stopped for about
ten seconds, even after selecting
a track, it turns off.
1 During play, set the mode
switch to MODE.
If you want to stop the following
operation partway, set to NORMAL.
2 Press [ ].
“” is displayed.
3 Press [ ] or [ ] to select
“”
, then press [ ].
This is the clock setting mode.
S
4 Press [ ] or [ ] to select
“” or “ ”,
then press [ ].
5 Press [ ] or [ ] to set the
time, then press [ ].
6 Set the mode switch to
NORMAL.
• To display the clock, set the mode
switch to HOLD during play or press
[] while the switch is set to HOLD .
• Adjust the clock regularly to
maintain accuracy.
Skipping tracks
Setting the clock
Maintenance
Press [ ] or [ ] during
play at the NORMAL position
().
J
K
Direct play
Play stops.
1 Press [ ] during play at
the NORMAL position ( ).
J
2 Press [ ] or [ ] to
select the track.
Tracks change faster if you press
and hold [ ] or [ ].
Search
Press and hold [ ] or [ ]
during play at the NORMAL
position ( ).
J
L
The operation display flashes during
search (“ ” or “ ”).
T
M
1 During play, set the mode
switch to HOLD.
2 While pressing and holding
[ ], press [ ] (darker) or
[] (lighter).
3 Set the mode switch to
NORMAL.
Adjusting the contrast
•A few seconds after changing, the
display returns to the track title
indication automatically.
If you want to maintain the display,
press and hold [ ].
•Track titles , playlist titles ,
and artist information scroll
from right to left if they
do not fit on the display.
•
Titles including text data the unit
doesn’t support cannot be displayed.
h
g
f
3 Set the mode switch to
NORMAL.
Clean with a soft, dry cloth.
Do not use any type of abrasive pad,
scouring powder or solvent such as
alcohol or benzine.
Adjusting and
changing the display
1 During play, set the mode
switch to MODE.
2 Press [ ] to change the
display.
•
The display changes with each press .
: Track number
a
: Elapsed play time
b
: Total number of tracks
c
: Total play time
d
: Bitrate display when playing
AAC audio data ( shows
the displays when playing
other types of data.)
U
e
Open the cover.
Insert the card so the label is
facing up and the end with the
corner cut off is facing in.
Push on the center of the card
so it locks into place and close
the cover.
RQT7096