User manual

ManualsBrandsPanasonic ManualsDomestic AppliancesSwitch EVQPU

Light Touch Switches/EVQPU

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

3 4 5 6 789

Type

7th & 8th

Mounting Height

1.65 mm

9th

Push Plate Color

Black

PU 0 2K

2.2 N

1.6 N

Operating

Force

Terminal

Type

Straight

J-bent

Straight

J-bent

6th

Without Boss

With Boss

Small-sized Side-operational SMD

Light Touch Switches

Type:

EVQPU

■ Speciﬁ cations

■ Explanation of Part Numbers

Type Snap action / Push-on type SPST

Electrical

Rating 10 µA 2 Vdc to 50 mA 12 Vdc (Resistive load)

Contact Resistance 500 m

액

max.

Insulation Resistance 100 M

액

min. (at 100 Vdc)

ielectric With stand ing Voltage

250 Vac for 1 minute

Bouncing 10 ms max. (ON, OFF)

Mechanical

Operating Force 1.6 N

+0.7

N2.2 N

+0.8

Travel 0.3 mm

+0.1

Push Strength 30 N (1 minute)

EnduranceOperating Life 100000 cycles min.

Operating Temperature –40 °C to +85 °C

Storage Tem per a ture

–40 °C to +85 °C (Bulk)

–20 °C to +60 °C (Taping)

Minimum Quantity/Packing Unit 4000 pcs. Embossed Taping (Reel Pack)

Quantity/Carton 20000 pcs.

–0.2

–0.7–0.4

■ Features

● External dimensions : 4.7 mm҂3.5 mm, Height 1.65 mm

● A wide range of terminal type : J-bent, Straight

■ Recommended Applications

● Car navigation, Car audio

Jun. 2008

Summary of content (4 pages)

PAGE 1
Light Touch Switches/EVQPU Small-sized Side-operational SMD Light Touch Switches Type: EVQPU ■ Features ● External dimensions : 4.7 mm҂3.5 mm, Height 1.65 mm ● A wide range of terminal type : J-bent, Straight ■ Recommended Applications ● Car navigation, Car audio ■ Explanation of Part Numbers 1 2 3 4 5 E V Q P U 6 7 8 9 0 2 K Type 6th Without Boss With Boss A C B D J L K M Terminal Operating Type Force Straight J-bent Straight J-bent 7th & 8th 02 Mounting Height 1.
PAGE 2
Light Touch Switches/EVQPU ■ Dimensions in mm (not to scale) No. 1 6.4 +0 – 0.3 4.7±0.1 EVQPUJ EVQPUA 3 1 4 2 3.5 4.5 (Embossed Taping) With straight terminals Without boss 2.6 1.65 +0.30 –0.10 1.4±0.1 3 1 4 2 Circuit diagram 6.8±0.1 0.7±0.1 2.7±0.1 1.7±0.1 0.6±0.1 3.7±0.1 3.7 PWB land pattern for reference Part Numbers Operating Force Height Push Plate Color Operating Life EVQPUJ02K 1.6 N 1.65 mm Black 100000 cycles EVQPUA02K 2.2 N 1.65 mm Black 100000 cycles No. 2 6.
PAGE 3
Light Touch Switches/EVQPU ■ Dimensions in mm (not to scale) No. 3 5.5 +0 – 0.3 4.7±0.1 EVQPUK EVQPUB 4.5 With J-bent terminals Without boss 3 1 4 2 3.5 (Embossed Taping) 1.4±0.1 2.6 1.65 +0.3 – 0.1 3 1 2 4 Circuit diagram 0.6±0.1 6.6±0.1 3.7 2.7±0.1 0.7±0.1 1.7±0.1 3.7±0.1 PWB land pattern for reference Part Numbers Operating Force Height Push Plate Color Operating Life EVQPUK02K 1.6 N 1.65 mm Black 100000 cycles EVQPUB02K 2.2 N 1.65 mm Black 100000 cycles No. 4 5.
PAGE 4
Light Touch Switches/EVQPU ■ Recommended Reflow Soldering Conditions ● Embossed Carrier Taping Fan or Normal Temp. 230 180 Tape width=12.0 mm t1 Feeding hole Chip pocket P2 P0 φD0 E 150 F W A B Operation Top (°C) MAX. 260 t2 (Normal Temp.) 90±30 P1 Chip component Tape running direction 40±10 Soldering Time (s) Unit: mm Part No. Height EVQPU 1.65 A B W F E 7.0 ±0.2 5.75±0.20 12.0±0.3 5.78±0.10 1.75±0.10 P1 P2 P0 D0 Dia. 8.0±0.1 2.0±0.1 4.0±0.1 1.5 –0 +0.1 t1 t2 0.35±0.