MIDI terminals MIDI (Musical Instrument Digital Interface} is the standard specification that enables connection to equipment such as synthesizers and personal computers. Data transmission and reception are possible between the Technicians organ and equipment provided with MIDI terminals. Min THRU ouT This argon can transmit or receive data for UPPER, LOWER, BASS and SOLO parts. The hollowing data can be received. {Connect the IN terminal of this instrument to the OUT terminal of the external equipment.
‘Ratting MIDI functions When using MIDI signals, set the MOTH functions mode as follows: M Basic Chance! Designation Basic channels numbered from 1 to 18 are available for Mid signals. The channels on the transmission side and receiving side must match before keyboard on/off data, voice data, effect data and sustain data cane transmitted and received. + Set the necessary basic channel number for sate UPPER, LOWER, BASS and SOLO part.
. Octave Shift Each part can lase be shifted as far as 3 octaves up or down, MIDI IN and MIDI OUT octave shifts are interrelated. If OUT automatically set to ~1. Use the DRUMS and AC COMP buttons of the VOLUME control to set the octave shift. VOLUME DRUMS AC COMP Omw Om Lw ew (press mg two buttons} (press mg two buttons) 0 {pressing two buttons) MUSICAL DISPLAY ‘The OUT octave shift is displayed.
organ sound off Mode exzs/exss) Organ sound output can be turned off when the organ is connected with the MIDI terminal to an external instrument tor sound reproduction. * Theretofore condition of each part (UPPER, LOWER, BASS, $0LO} can be set, and the settings can be stored in the respective VOICE SETTING COMPUTER buttons. > Setting each part . Press the RECORD button. . Press one of the VOICE SETTING COMPUTER buttons.
" Technicians Organ MID! implementation Hart [ ] {Transmitted) Fumigation, .