Operating instructions
Part I Sounds and effects
37
QQTG0701
Sounds and effects
Effects
DIGITAL EFFECT
DIGITAL EFFECT gives the sound richness and
enhances your performance.
1.
In the CONDUCTOR or PART SELECT sec-
tion, turn on the part to which this effect will be
applied.
2.
Press the DIGITAL EFFECT button to turn it
on.
• The on or off status of the DIGITAL EFFECT is preset for
each sound.
• This effect does not work for the sounds in the DRUM
KITS sound groups.
• This effect may not work for some sounds.
MULTI EFFECT
The MULTI EFFECT works like a studio effects
processor, providing effects such as CHORUS,
PHASER, DELAY and DISTORTION.
1.
In the CONDUCTOR or PART SELECT sec-
tion, turn on the part to which this effect will be
applied.
2.
Press the MULTI EFFECT button to turn it on.
䡲
䡲䡲
䡲
Type and parameter settings
1.
Press and hold the MULTI EFFECT button for
a few seconds.
• The display changes to the following.
2.
Use the ▲ and ▼ buttons to select an effect
group.
• The EFFECT MEMORY is for edited effects (see below).
3.
Use the buttons to the right of the display to
select the type.
• If the types comprise more than one display “page,” use
the PAGE buttons to switch pages.
• Press the VARI button to enable the variation effect.
• This display can also be accessed from the REVERB &
EFFECT MENU display. (Refer to page 108.)
䡲
䡲䡲
䡲
EFFECT EDIT
The effects can be edited and then stored in a
memory.
1.
Select an effect type to use as a base.
2.
Press the EFFECT EDIT button.
• The display changes to the following.
3.
Use the PARAMETER ▲ and ▼ buttons to
select the parameter.
4.
Use the VALUE
∧
and
∨
buttons to adjust the
setting.
• The parameters vary depending on the effect type
selected as the base.
• (V) is the abbreviation of VARIATION.
5.
Press the WRITE button.
6.
Press the EFFECT NAMING button and
assign a name to the effect, if necessary.
• Refer to page 52 for details about the NAMING proce-
dure.
7.
Use the EFFECT MEMORY ▲ and ▼ buttons
to specify the location in which to store the
edited effect.
8.
Press the OK button.
MAIN
VOLUME
MAX
MIN
MAX
OFF
AUTO PLAY CHORD
RHYTHM GROUP
TEMPO / PROGRAM
PROGRESSIVE
PIANIST PIANO STYLIST
SPLIT
POINT
METRONOME
POP ROCK
FUNK &
SOUL DISCO
POP BALLAD
BALLAD
BALLROOM
& SHOW
MEMORY
CONTRAST
LATIN &
WORLD
JAZZ &
SWING
WALTZ
& TRADUSA16 BEAT8 BEAT
IN OUT
SOUND
ARRANGER
SET
MODE
CHORD FINDER
OFF/ON
ONE TOUCH
PLAY
APC/SEQUENCER
VOLUME
DEMO
MUSIC STYLE ARRANGER
VARIATION
12 1 2 1 1234BEAT
LOAD
SEQUENCER
RESET
COUNT
INTRO
234
FADE
FILL IN INTRO & ENDING
SYNCHRO & BREAK
START / STOP TAP TEMPO
HELP
OTHER PARTS/TR
-
TRANSPOSE
+
MUTE
PAGE
DISPLAY HOLD
EXIT GRAND
UPRIGHT ELECTRIC
MODERN SIMPLE PIANO TECHNI-CHORD BANK
AB
C
P.MEM 5-8
SET 1 / 5 2 / 6 3 / 7 4 / 8
SOUND GROUP
SEQUENCER
PIANO
STRINGS
BASS
MALLET &
ORCH PERC
WORLD
PIANO
MIXTURES
ORCH
MIXTURES
DIGITAL
DRAWBARS
DRUM KITS
MEMORY
LEFT RIGHT 2 RIGHT 1
DIGITAL
EFFECT
MULTI
EFFECT
CHORUS REVERB
CHORD STEP REC
VOCAL
GUITAR &
HARPSI BRASS PLAY
EASY
REC
FAVORITES
PROGRAM
MENUS
DISK
IN USE
DISK
LOAD
SAX &
WOODWIND
ORGAN &
ACCORDION
SYNTH
SOUND
EXPLORER
CONDUCTOR
PANEL MEMORY
DIGITAL
EFFECT
MULTI
EFFECT
06_Part I.fm 37 ページ ２００３年５月２０日 火曜日 午後５時２４分