Combination 15.2˝ Diagonal LCD TV/DVD Player Operating Instructions Model No. TC-15LV1 For assistance, please call : 1-800-211-PANA (7262) or send e-mail to : consumerproducts@panasonic.com or visit us at www.panasonic.com (U.S.A) For assistance, please call : 787-750-4300 or visit us at www.panasonic.com (Puerto Rico) For assistance, please call : 1-800-561-5505 or visit us at www.panasonic.
Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.
Important Safety Instructions 17) If an outside antenna is connected to the television equipment, be sure the antenna system is grounded EXAMPLE OF ANTENNA GROUNDING AS ANTENNA so as to provide some protection against voltage surges PER (NEC) NATIONAL ELECTRICAL CODE LEAD-IN WIRE and built up static charges. In the U.S.
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new combination 15.2 ″ Diagonal LCD TV/DVD player. To obtain maximum benefit from your set, please read these instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt, and record the model number and serial number of your set in the space provided on the rear cover of these instructions.
Table of Contents Installation and TV Settings Important Safety Instructions ...................................... 2 Federal Communication Commission Information ....... 4 Installation ..................................................................... 6 Disc handling ............................................................... 6 SUPPLIED ACCESSORIES ........................................ 7 Remote control battery installation ...............................
Installation Receiver Location Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture. To ensure optimum picture quality do not position magnetic equipment (motors, fans, other speakers, etc.) nearby.
Installation SUPPLIED ACCESSORIES Check the accessories before installations.
Installation Connecting the Antenna Cable to the RF In Terminal Antenna Connection - For proper reception of VHF/ UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to TV. Using the Cable Cover 1. Installing the cable clamp. VHF Antenna UHF Antenna 2. Using the Cable Clamp Open the cable clamp and pass the antenna cable through. Mixer RF in Terminal Coaxial cable Claw 3. Connect the antenna cable to RF in terminal. 4.
Installation Antenna Connection (Cable Box, and VCR) Use this configuration when connecting the TV to a cable TV system using a Cable Box and VCR. CABLE BOX ANTENNA TERMINALS ON THE LEFT SIDE OF THE TV OUTPUT INPUT Connect the cable from the Output terminal on the back of the Cable Box to the Antenna input terminal on the back of the VCR. VCR Connect the cable from the Output terminal on the back of the VCR to the Antenna input terminal on the left side of the TV.
Installation How to connect the input terminals Connects VCRs and other peripheral equipment (Super-VHS VCR) Audio R OUT L Video OUT (DVD Player) S-Video OUT R Audio OUT L PB COMPONENT VIDEO OUT PR S-VIDEO cable Y VIDEO Connect the S-VIDEO or VIDEO Terminal. AUDIO How to connect the DVD OUT Terminals (TV) S-Video IN L Audio INPUT R Notes: When a monaural VCR is used, connect the monaural audio cable to the AUDIO-L (Left) terminal.
Power ON / OFF Connecting the Plug to the Wall Outlet Note: The TV and AC adaptor will still consume some power as long as the power cord is still inserted into the wall outlet. 3 2 1 2 How to Turn the Power On Push the POWER switch on the TV to turn the set on. POWER-ON: Green Turn the power of the TV set off by pressing the POWER switch on the TV when the TV is on or in standby mode. Remote control sensor Example: The screen below is displayed for a while after the TV is turned on.
Location of Controls Controls on the TV POWER switch Remote control sensor Input mode selection button (See page 18) ASPECT mode selection button (See page 21) Volume up (+) / down (–) buttons Channel up ( ) / down ( ) buttons SLEEP timer button The TV may be preset to switch to stand-by after a fixed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed. 30 60 90 0 3 ” will flash.
Location of Controls Stand-by (ON/OFF) button TV must first be plugged into the wall outlet and turned on at the power switch (See pages 12, 38, 39). Use with DVD operation. (Refer to “DVD/CD Operation Guide”...See page 35) EJECT button Press to eject DVD or CD. EJECT DISPLAY POWER NU ANGLE E PM TO D ME VD NU DISPLAY button Press the DISPLAY button to display the current system status. Refer to “DVD Operation Guide” when using the DVD. Moves cursor to the left during menu mode.
Flow Chart of TV menu EJECT DISPLAY POWER U EN ANGLE M OP 1 D ME VD NU If the TV MENU button is pressed, the MENU screen will be displayed. If the TV MENU button is pressed once more, the MENU screen will be cleared.
Flow Chart of TV menu PICTURE ADJUST menu POSITION/SIZE menu PICTURE ADJUST POSITION / SIZE NORMALIZE BACK LIGHT 0 PICTURE 0 BRIGHTNESS 0 COLOR 0 TINT 0 SHARPNESS 0 AI PICTURE AUDIO ADJUST NORMAL ENTER STANDARD PIC MODE AUDIO ADJUST menu NORMAL PAGE NORMALIZE RETURN SELECT SIZE 1 BASS 0 TREBLE 0 PAGE RETURN SELECT 0 BALANCE OFF SURROUND RETURN ENTER AUTO MODE STEREO SAP MONO (See page 24) OFF ON (See page 25) (See pages 22,23) 1 Press to select each item.
Selecting LANGUAGE It is possible to change the screen menu language to a different language. (English, Français, Español) 1 Press the TV MENU button to display the MENU screen and select SET UP. MENU ADJUST SET UP ENTER PAGE ENTER Press to select LANGUAGE. Press to display the LANGUAGE screen. LANGUAGE RETURN PROGRAM CH SELECT DVD SET UP LOCK CLOSED CAPTION INPUT LABEL Press to select LANGUAGE.
5 Press to select YES. ENTER Press to select NO. AUTO PROGRAM In "AUTO PROGRAM" CHANNEL If YES selection Press to run AUTO PROGRAM 59 MENU STOP Channels will automatically advance until all channels have been scanned. Channel numbers with a video signal present will turn light blue indicating it has been stored in the Channel Scan Memory. 6 7 Press the RETURN button to return to the PROGRAM CHANNELS screen. Press the TV MENU button to exit the set up menu.
Playing a VCR or other peripheral equipment Confirming connections Confirm that the TV is in standby mode. To S-video output or video output Video camera VCR To audio output Laser Disc Player DVD player This equipment can also be connected to the rear terminals. See Connections for details. Turning the power on and switching input modes EJECT DISPLAY POWER NU ANGLE E PM TO D ME VD NU 1 POWER Turn the TV on.
Setting condition to be displayed DISPLAY (On-screen display) DISPLAY EJECT DISPLAY POWER NU ANGLE E PM TO D ME VD NU ENTER TV MENU Press this button to display channel number, off-timer remaining time, screen modes, and other settings. Display fades away after about 3 seconds. Press this button again to delete channel number display.
Child lock EJECT DISPLAY POWER NU ANGLE E PM TO D ME VD NU When CHILD LOCK is ON, the Disc cannot be ejected with the EJECT button. (The message below is displayed.) CHILD LOCK ON EJECT ENTER TV MENU RETURN SLOW/SEARCH SKIP STOP PAUSE ASPECT TV/VIDEO PLAY MUTE On remote 1 On TV set Press the TV MENU button to display the MENU screen and select SET UP. 2 Press to select OTHER ADJUST. ENTER SLEEP CH VOL Press to display the OTHER ADJUST screen.
ASPECT Controls The TV will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. STOP PAUSE ASPECT TV/VIDEO SLEEP CH ASPECT PLAY ASPECT button The aspect mode changes each time the ASPECT button is pressed. NORMAL JUST FULL ZOOM MUTE VOL SURROUND Picture Mode Explanation NORMAL will display a 4:3 picture at its standard 4:3 size.
Picture Adjustments 1 Press the TV MENU button to display the MENU screen and select ADJUST. MENU Press to select PICTURE ADJUST. ADJUST SET UP 2 Press to select the menu to adjust. NORMALIZE PIC MODE NORMALIZE is displayed at default. BACK LIGHT 0 PICTURE 0 BRIGHTNESS 0 COLOR 0 TINT 0 AI PICTURE SELECT 0 CINEMA NORMALIZE DYNAMIC STANDARD Displays unaltered image. CINEMA Ideal for movies. 22 DYNAMIC Displays a clear screen with contrast of light and dark.
Picture Adjustments BACKLIGHT Luminance of the back light is adjusted. PICTURE ADJUST PICTURE Selects proper brightness and density for the room. NORMALIZE STANDARD PIC MODE BRIGHTNESS Adjusts for easier viewing of dark pictures such as night scenes or a hair portion. COLOR Adjusts slightly to a lighter color. BACK LIGHT 0 PICTURE 0 BRIGHTNESS 0 COLOR 0 TINT 0 PAGE RETURN SELECT 0 SHARPNESS TINT Adjust for flesh tone color. ENTER AI PICTURE OFF ON SHARPNESS Displays a sharp image.
Adjusting screen position and size 1 ASPECT Press to select the screen mode to adjust screen position and size. ENTER TV MENU RETURN SLOW /SEARCH SKIP STOP For adjusting position For adjusting size ZOOM mode NORMAL and JUST mode PAUSE ASPECT TV/VIDEO 2 TV MENU SLEEP Press to display the MENU screen. Press to select ADJUST menu.
Audio Adjustments 1 Press the TV MENU button to display the MENU screen and select ADJUST. Press to select to AUDIO ADJUST. MENU ADJUST POSITION / SIZE AUDIO AUDIO ADJUST Press to display the AUDIO ADJUST screen. 2 SET UP ENTER PICTURE PICTURE ADJUST ENTER PAGE RETURN SELECT Press to select the menu to adjust each item. ENTER BASS Adjusts low sounds TREBLE Adjusts high sounds BALANCE Adjust left and right volume Select the desired level by listening to the sound.
Selecting STEREO/SAP/MONO Press the TV MENU button to display the MENU screen and select AUDIO ADJUST screen. Press to select STEREO/SAP/MONO. AUDIO ADJUST NORMAL ENTER CHANGE BASS 0 RETURN TREBLE 0 SELECT 0 BALANCE SURROUND Press to select STEREO/SAP/MONO. ENTER AUTO MODE STEREO SAP OFF MONO ENTER Helpful Hints: TV MENU • STEREO - Two channel Audio reception. • SAP - Second Audio Programming (typically Press to end. • used for bilingual audio).
Customizing the VIDEO INPUT labels Display for each VIDEO INPUT can be changed to match with the connected device (VCR, DVD Player). Example: When changing VIDEO to LD. 1 Press the TV MENU button to display the MENU screen and select SET UP. MENU ADJUST SET UP ENTER PAGE LANGUAGE Press to select INPUT LABEL. RETURN SELECT PROGRAM CH DVD SET UP ENTER LOCK CLOSED CAPTION INPUT LABEL Press to display the INPUT LABEL screen. OTHER ADJUST Press to select VIDEO / COMPONENT menu.
Setting the other adjustments Natural Color This feature allows you to set a natural color for the picture. 1 Press the TV MENU button to display the MENU screen and select SET UP. MENU ADJUST SET UP ENTER PAGE Press to select OTHER ADJUST. LANGUAGE RETURN SELECT PROGRAM CH ENTER DVD SET UP LOCK CLOSED CAPTION Press to display the OTHER ADJUST screen. 2 INPUT LABEL OTHER ADJUST Press to select NATURL CLR. Press to turn NATURL CLR OFF or ON.
Setting the other adjustments Automatically changing screen size for VIDEO INPUT modes (ID-1) If the received signal contains screen size specifications in VIDEO INPUT the screen size is automatically changed. 1 Press the TV MENU button to display the MENU screen and select SET UP. MENU ADJUST SET UP ENTER Press to select OTHER ADJUST. PAGE LANGUAGE RETURN SELECT PROGRAM CH ENTER DVD SET UP LOCK CLOSED CAPTION Press to display the OTHER ADJUST screen.
Lock Feature In the United States, the V-CHIP consists of two rating systems, which are MPAA (MOTION PICTURE) and TV PARENTAL GUIDELINES. Its function is to block programs by the rating data in the XDS data packets sent from broadcasting stations. The user can select which rating programs should be blocked by the LOCK MENU options. Note: The V-CHIP used in this unit model, is capable of selecting the U.S. ratings that are indicated in this manual.
Lock Feature Press to select rating to lock. 2 Press to select YES or NO. ENTER MOTION PICT. RATING VIEW NR PROGRAMS? NO YES CHANGE PAGE RETURN SELECT Rating (turns red when on) G : General audience PG : Parental guidance suggested PG-13 : Parental guidance needed under 13 years old R : Restricted NC17 : No one under 17 is admitted X : Adults only G PG PG—13 R NC—17 X RETURN Press to return to LOCK screen. 3 Setting MOTION PICT. . Locking and unlocking the ratings selected above.
Lock Feature TV PARENTAL GUIDE Press to select TV PARENTAL. LOCK ENTER Press to select ON or OFF. MOTION PICT. CHANGE OFF ENTER ON CHANGE SETTING RETURN SELECT TV PARENTAL OFF ON CHANGE SETTING Changing setting. CHANGE CODE Press to select CHANGING SETTING (the menu following TV PARENTAL).
Closed Captions This unit has a built in decoder that provides a visual depiction of the audio portion of a television program in the form of written words across the screen (white or colored letters on a black background). It allows the viewer to read the dialogue of a television program or other information. 1 Press the TV MENU button to display the MENU screen and select SET UP. MENU ADJUST SET UP ENTER PAGE LANGUAGE Press to select CLOSED CAPTION.
DVD/CD Operation Guide 35
Features of DVD on this Product High picture quality • 10 bit video D/A converter Reproduces fine images faithfully. • An array of picture quality modes yielded by digital processing Signal deterioration is kept to minimum by processing the data digitally. This feature can be used to tailor picture quality for DVD playback.
Features of DVD on this Product Enjoying digital audio output from the digital audio output connector Optical digital audio output connector Disc DVD Video CD CD Sound recording format Optical digital audio output from connector Dolby Digital Dolby Digital bitstream (1–5.1ch) or PCM (2ch) (48 kHz/16 bit)*1 *2 Linear PCM (48/96 kHz 16/20/24 bit) Linear PCM (2ch) (48 kHz sampling/16 bit only) or no output*1 dts Dts bitstream (1–5.1ch)*1 MPEG 1 PCM (44.1 kHz sampling)*2 Linear PCM Linear PCM (44.
Location of Controls for DVD Operation Switches angles when scenes taken from several angles are being played. (See page 47.) Used to eject DVD or CD. EJECT DISPLAY Turns the power ON and OFF when the power on the TV is ON. Displays the menu for discs with several titles recorded. (See page 41, 43.) POWER NU ANGLE E PM TO D ME VD NU ENTER TV MENU RETURN STOP PAUSE ASPECT TV/VIDEO SLEEP Displays the menu for DVDs with several menus. (See page 41, 43.
Functions of front operation panel Stand-by : Red Power ON : Green (See page 11.) POWER switch Turns power ON and OFF. (The remote control can be operated when this is ON) Remote control sensor Disc slot (Slot in loading). (See page 40.) ASPECT button (See page 21.) TV/VIDEO button Plays DVD/CD discs. (See page 40.) Pauses or stops play of DVD/ CD discs. LCD display (15.2 inch wide-screen) Stops operation of disc. (See page 41.) For DVD/CD : Advances chapter / track forward and back. (See page 42.
Basic play EJECT DISPLAY POWER U EN ANGLE M OP D ME VD NU T ENTER TV MENU Before enjoying DVD/Video CD/CD The On-Screen menu language of your player has been factory preset to English. You can change the menu language to French or Spanish. Refer to “Selecting On-Screen Display menu language” on page 56. In the explanations given below it is assumed that English has been selected as the menu language. RETURN SLOW/SEARCH SKIP STOP PAUSE To play PLAY POWER to switch on the power.
Basic play When the menu continues onto another screen ). After step 3 on page 40, press SKIP ( To return to the previous menu screen Press SKIP ( • ( Due to the design of some software titles, SKIP , • of the disc concerned. ) ) may not always work. For operation, refer also to the jacket Stopping play and returning to the menu screen Press DVD MENU or TOP MENU. Play is suspended, and the menu screen is displayed. • The buttons may not work depending on the disc used.
Basic play Skipping chapters or tracks OPEN CLOSE DISPLAY POWER NU ANGLE E PM TO D ME VD NU Press SKIP ( ) during play. , With the remote control On the TV SET SKIP ENTER TV MENU Reverse RETURN SLOW/SEARCH SKIP Forward Reverse Forward For your reference: • A chapter (DVD) or a track (Video CD/CD) is skipped each time the button is pressed.
Basic play Frame advance (Frame reverse) [DVD/Video CD] 1 Press PAUSE button. ( , 2 Press:SELECT Reverse Using a TOP MENU [DVD] Some movie discs may have two or more titles. If the disc has a title menu recorded on it, pressing TOP MENU shows the title menu screen. (The details of operation depend on the disc used.) ) in the still picture mode. : Forward The disc is advanced (reversed) by one frame each time • the SELECT ( , ) is pressed.
Basic play Random play [ CD ] EJECT DISPLAY POWER T M OP EN U ANGLE D ME VD NU Using PLAY MODE button PLAY MODE button in the stop mode. 1 Press The program Random play screen appears on ENTER TV MENU Two way setting method for Random Play. (1.From play mode, 2.From display mode) The player plays the tracks on the disc in random order. the screen. RETURN SLOW/SEARCH SKIP STOP PAUSE PLAY MODE button again, the Random 2 Press play screen changes “OFF” to “ON”.
Basic play Repeat play Repeat viewing (Listening) Press REPEAT MODE during play.
Changing audio soundtrack language [ DVD ] EJECT DISPLAY POWER P TO ME NU ANGLE D ME VD NU It is possible to change the audio soundtrack language to a different language from the one selected at the initial settings if available. (See page 53.) This operation works only with discs on which multiple audio soundtrack languages are recorded. 1 ENTER TV MENU RETURN SLOW/SEARCH SKIP STOP PAUSE 2 Press DISPLAY during play to display the disc information.
Changing subtitle language [ DVD ] It is possible to change the subtitle language to a different language from the one selected at the initial settings if available. (See page 53.) This operation works only with discs on which multiple subtitle languages are recorded. 1 Press DISPLAY button to display the player information. 01 12 01 05 00 00 00 1 2 0 1 ENG ON • When no subtitles are recorded, “– –” will be displayed instead of the language number.
General information about GUI screens This player features GUI (Graphical User Interface) screens providing various functions. A “banner” will be displayed on the TV when DISPLAY button on the remote control is pressed. Operating the SELECT/ENTER button on the remote control will show disc information (title/chapter/track number, elapsed playing time, audio/subtitle language, and angle) and player information (repeat play, A-B repeat play, play mode, etc.). Some icons allow the settings to be changed.
General information about GUI screens Screen for disc information (For DVD) Title No. Change the title No. with time SELECT ( Elapsed playing time (hour: minute: second) LPCM Audio attribute Digital DTS 1 English French German Italian Spanish Dutch Swedish Norwegian Danish 96k or 48k 16b 20b 24b , ) button or the numeric buttons. Press ENTER during playback to store location A and press ENTER again to store location B. Repeat play between the two locations starts.
General information about GUI screens Screen for disc information (For Video CD/CD) Change the Track No. with the SELECT ( Track No. Elapsed playing time (minute: second) , ) button or the numeric buttons and press ENTER. Display is changed with the SELECT ( , ) button.
GUI screen reference chart Disk information screen 02 12 Title no. (DVD) Track no. (CD, video CD) When you select a no. and press [Set], playback of that title/track begins. (Selection can also be made using the numerical buttons) 02 05 Chapter no. (DVD) When you select a no. and press [Set], playback of that chapter beings.
Initial settings Once the intial settings have been completed, the player can always be operated under the same conditions (especially DVDs). The settings will be retained in the memory, until the settings are changed, even after switching to standby mode. OPEN CLOSE DISPLAY POWER P TO N ME D ME VD NU ANGLE U Common procedures ENTER TV MENU 1 2 RETURN SLOW/SEARCH SKIP STOP PAUSE PLAY Press TV MENU to display menu screen during stop mode. Press SELECT ( , ) button to select SET UP.
Initial settings DISC MENU These settings allow you to choose the languages used when a DVD is played. If the language selected is not available on the disc, the language designated by each disc will be selected. There are cases where the selected language recorded by the disc designates another language. Press the SELECT ( , ) button to select DISC menu and to set following steps. Selecting AUDIO language [DVD] 1 Press the SELECT ( SETUP , ) button to select AUDIO and press ENTER button.
Initial settings ■ Selecting MENUS [DVD] 1 Press the SELECT ( SETUP , ) button to select MENUS and press ENTER button. MENUS ENGLISH ENGLISH: English is selected. (Factory preset) FRENCH FRENCH / SPANISH: The language is selected. SPANISH ENTER OTHER OTHER 0: 0 RETURN 2 Press the SELECT ( , ) button to select item and press ENTER. Another language of each disc will be selected. (Refer to the language codes on page 58.
Initial settings • Change the password SETUP Press the SELECT ( , ) button to select the CHANGE 1 PASSWORD and press ENTER button. RATING CHANGE LEVEL LEVEL 1 CHANGE PASSWORD ENTER RETURN SETUP 2 Input new password and press ENTER button. RATING ENTER A NEW 4 - DIGIT PASSWORD. THEN PRESS ENTER. 2222 ENTER RETURN SETUP 3 Press RETURN button to exit RATINGS menu. RATING REMEMBER THE PASSWORD. OR YOU CANNOT CHANGE THE RATING LEVEL.
Initial settings DISPLAY MENU ■ Setting on screen DISPLAY 1 2 Press the SELECT ( , ) button to select DISPLAY menu . Press the SELECT ( , ) button to select each item and press ENTER button. SETUP MENU LANGUAGE ENGLISH FRANÇAIS ESPAÑOL ENTER You can change the language used for the on screen display menus. ENGLISH: SELECTED as onscreen language. FRANÇAIS: SELECTED as onscreen language. ESPAÑOL: SELECTED as onscreen language.
Initial settings ■ Setting AUDIO [DVD] 1 2 Press the SELECT ( , ) button to select AUDIO menu . Press the SELECT ( , ) button to select each item and press ENTER button. Previous page SETUP Setting for dynamic range control This is for selecting the DVD dynamic range (difference between high and low volume). • This setting works only with DVD discs recorded in Dolby digital. STANDARD: Set this to listen with a range equivalent to a normal television.
Language code list Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or “MENUS”.
How images appear on your TV (aspect ratios of the screen) The Images on the TV screen depend on the type of software and the TV set. Type of TV set (ASPECT mode) Type of software 4:3 16:9 (“FULL” mode) 16:9 (“ZOOM” mode) 16:9 (“AUTO” mode) Wide-screen (pan and scan format) Right and left edges are cut off. Full screen Top and bottom edges are cut off. Full screen Software (4:3) Full screen Screen horizontally enlarged Top and bottom edges are cut off.
Troubleshooting Before requesting service for this LCD/DVD combo, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for instructions.
Troubleshooting For TV broadcasts (VHF, UHF) Symptoms Cause and remedy Page A black band appears momentarily when selecting channels with video • This is due to noise generated when changing channels. – In some parts color tint is poor, and some parts are colored • If a bright image (of white clothes, etc.) is stopped, it may be partially colored. – Both edges of the screen, or columns or window frames, appear bent • They may appear bent due to the received channel and the screen brightness.
Troubleshooting For DVD operation Symptoms Cause and remedy Page The preset audio or subtitle language does not appear • The DVD does not have multiple languages. 49 The disc cannot be removed • Is the child lock "On"? 20 Frequently asked questions (Q&A) Q (Question) A (Answer) Page • Almost all DVD discs have copy protection so recording is not possible. • The region number indicates that the disc conforms to the DVD standard. Discs which – 36 Sound volume seems lower than TV or radio, etc.
Specifications Power Source Power Consumption AC 120 V, 60 Hz Average use : 52 W (Maximum Current 2.5 A) Stand-by condition : 0.8 W LCD Screen Size Channel Capability-181 Sound Speaker Audio Output Headphones FEATURES Disc Played TFT 15.2-inch, 16 : 9 aspect ratio, 854 × 480 dots, 409,920 pixel 13.2 ″ (336 mm) (W) × 7.4 ″ (189 mm) (H) × 15.2 ″ (385 mm) (DIAGONAL) VHF-12 ch : UHF-56 ch : Cable-125 ch 1.57 ″ (4 cm) × 1.10 ″ (2.8 cm) 2pcs. 2.0 ″ (5 cm) dia. 1pc. 6.5 W [ 2 W + 2 W+ 2.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.