Model No. Número de modelo TC-P60ST30 TC-P65ST30 Owner’s Manual 60”/65” Class 1080p Plasma HDTV (60.1/64.7 inches measured diagonally) Manual de usuario Televisión de alta definición de 1080p y clase 60”/65” de Plasma (60,1/64,7 pulgadas medidas diagonalmente) For assistance (U.S.A./Puerto Rico), please call: 1-877-95-VIERA (958-4372) www.panasonic.com/help For assistance (Canada), please call: 1-866-330-0014 www.vieraconcierge.ca Para solicitar ayuda (EE.UU.
Experience an amazing level of multimedia excitement Enjoy rich multimedia SD memory card USB device Camcorder VCR Cable box Amplifier with Speaker system DVD player/ Blu-ray Disc player DVD recorder/ Blu-ray Disc recorder ■ Do not display a still picture for a long time This causes the image to remain on the plasma screen (“Image retention”). This is not considered a malfunction and is not covered by the warranty.
VIERA Link™ is a trademark of Panasonic Corporation. HDMI, the HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Contents Please read before using the unit SDXC Logo is a trademark of SD3C, LLC.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. WARNING: The lightning flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
● Do not place any objects on top of the Plasma TV. If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma TV, please consult an Authorized Service Center. In the unlikely event that you receive a shock from this product it is possible that your household outlet may be wired improperly. Have an electrician verify that the TV’s outlet is properly wired.
WARNING/CAUTION (3D Eyewear) ● Be careful of the tips of the frame when putting on the WARNING ■ About Prevention of Accidental Ingestion ● Do not store batteries, the band accessory or nose pads in places where small children can reach. There is a danger small children could swallow such parts by mistake. • If a child accidentally swallows such parts, seek immediate medical attention. ■ About Prohibition of Disassembly ● Do not disassemble or modify the 3D Eyewear.
FCC STATEMENT This equipment has been tested and found to comply with the limits for an Other Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Accessories/Optional Accessories Accessories Check you have all the items shown. Accessories Remote Control Transmitter Batteries for the Remote Control Transmitter (2) N2QAYB000571 AC cord AA Battery Wireless LAN Adapter (p. 39) N5HBZ0000055 K2KYYYY00150 Pedestal TBL5ZX0042 (TC-P60ST30) Owner’s Manual Quick start guide Child safety Product Registration Card (U.S.A.) Optional Accessories TBL5ZX0170 (TC-P65ST30) How to assemble (p.
■Assembling the pedestal Attaching the pedestal to TV [TC-P60ST30] [TC-P65ST30] Fix securely with assembly screws A (Total 4 screws). Tighten screws firmly. Fix securely with assembly screws A (Total 6 screws). Tighten screws firmly using Allen wrench C . Accessories Assembly screws A A A THEL090N (for 60”) size (M5 x 25) (Black) (4) C B Front Front THEL090N (for 60”) size (M5 x 25) (Black) (4) ■Set-up Carry out work on a horizontal and level surface.
Warning Do not disassemble or modify the pedestal. Otherwise the TV may fall over and become damaged, and personal injury may result. Caution Do not use any pedestal other than that provided with this TV. Otherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
Connections Connection Panels LAN connector Front of the TV DIGITAL AUDIO OUT A SD card slot (p.26) B C HDMI 3 terminal Back of the TV * See page 10 (Power cord connection) VHF/UHF Antenna Back of the TV Cable TV Power Cord (Connect after all the other connections have been made.
AV cable connection Best To use HDMI terminals AV Equipment HDMI AV OUT e.g. Blu-ray Disc player AV Equipment DVI OUT HDMI-DVI Conversion cable L Connect to Audio input terminal HDMI connection (p. 57) AUDIO OUT e.g. Blu-ray Disc player R ● VIERA Link connection, please refer to p. 33 ● The HDMI connection is required for a 1080p signal. To use COMPONENT terminals Y red green green PB COMPONENT Good blue green blue blue VIDEO OUT AV Equipment PR red red e.g.
Identifying Controls TV controls/indicators Front of the TV Back of the TV 3D Eyewear transmitter Selects channels in sequence Volume up/down Getting started POWER button Displays the Main Menu Changes the input mode Chooses Menu and Submenu entries Power indicator (on: red, off: no light) Remote control sensor Within about 23 feet (7 meters) in front of the TV set Note ● The TV consumes a small amount of electric energy even when turned off.
First Time Setup The first time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 53) is set to “No”.
ANT/Cable setup Do you use a Cable, Satellite or Fiber Optic box with this TV? ANT/Cable setup Step 4 of 7 Do you use a Cable, Satellite or Fiber Optic box with this TV? Yes No OK Select Return Yes No b Select connection type (Cable/Antenna) ANT/Cable setup Step 4 of 7 ANT/Cable setup Step 4 of 7 How does the TV receive its programming content? Cable service (No box) Which wiring method is used to connect your box to the TV? Over-the-Air Antenna select VIDEO IN Antenna/Cable in HDMI Ant
Label the inputs for easy identification (Label inputs) To name each input, follow the instructions on screen. When done, select NEXT and press OK to go to the next step. Label inputs select Step 5 of 7 What is connected to HDMI 1 ? For your convenience, you may name each input for easy identification. The labels will be shown in the “Input select” menu. set HDMI 1 Video OK Select HDMI 2 GAME GAME Next or RETURN HDMI 3 1 @.
Adjust the Clock (Set clock) When done, select NEXT and press OK to go to the next step.
■ About wireless LAN ● To use the Wireless LAN Adapter, an access point needs to be obtained. For the additional information for Wireless LAN Adapters, check the following website: http://Panasonic.com/NetConnect ● It is recommended to use the Wireless LAN Adapter with the supplied extension cable. ● Do not use the Wireless LAN Adapter to connect to any wireless network (SSID*) for which you do not have usage rights. Such networks may be listed as a result of searches.
Watching TV Turn power on (Remote) (TV) Note Please select correct input --> (p. 23) or Menu > Setup > Advanced setup > VIERA Connect Banner Select a channel number To directly enter the digital channel number up or When tuning to a digital channel, press the button to enter the minor number in a compound channel number. down example: CH15-1: Note Basic • Also available side CH button on the unit. [For Cable/Satellite box connection] - Use your connected box’s remote control.
Change aspect ratio and Zoom the picture ■ Press FORMAT to cycle through the aspect modes (p. 55) • 480i, 480p: FULL/JUST/4:3/ZOOM • 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM Use when the picture does not fill the whole screen (bars appears on either side of the image) or portions of the picture is trimmed. Note 1. Some content, such as film-based movies, are available in extra-wide format. Top and bottom bars are unavailable. 2.
■ Other Useful operations Entering characters You can use the remote control keys to enter the alphanumeric characters. ■ Switches input mode Menu Proxy setting Proxy address 1 4 8 ABC → abc → 123 Proxy port 0 ■ Press each number key to cycle through the alphanumeric character OK Select RETURN ABC → abc 1 @. 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7PQRS 8 TUV 9WXYZ LAST 0 - , Delete Navigation area ● You can also use a USB keyboard (not supplied) to enter the alphanumeric characters. ● Keyboard type (p.
Using VIERA TOOLS VIERA TOOLS is the easy way to access the TV’s special features. They are displayed as shortcut icons on the TV screen. Display VIERA TOOLS Select the item select next Set each item 3D Change the view 3D⇔2D (p. 25) VIERA Connect Displays VIERA Connect Home Screen for Enjoying Internet Services (p. 43) Media player Media player (p. 26-31) DLNA Using DLNA feature (p. 44) Press to exit from a menu screen Press to go back to the previous screen Game mode Change to “Game” mode.
Watching content from external devices With the connected equipment turned On Display the Input select menu Select the input mode Input select 1 ANT/Cable In Not used 2 HDMI 1 GAME 3 HDMI 2 4 HDMI 3 5 Component 6 Video or AUX select (example) enter (shortcut) Press the corresponding NUMBER button on the remote control to select the input of your choice. Or, press the INPUT button repeatedly, to cycle through the available inputs.
Viewing 3D images on TV Precautions for Viewing 3D Images Infra-red receiver section Do not soil the infra-red receiver section or attach stickers etc. to it. • Doing so may prevent the receiver from receiving signals from the television, which may prevent the 3D Eyewear from operating normally. If the 3D Eyewear is affected by other infra-red data communication equipment, the 3D images may not be displayed correctly.
Change the view 3D⇔2D ■ Simply switches 3D ⇔ 2D images (Auto mode) select 3D format select ● VIERA TOOLS -->p. 22 ”3D” icon also available. 3D 2D OK (example) ● Switches to Manual mode (see below) ■ Change 3D format (Manual mode) During above operation press red button and switch to Manual mode.
Using Media player You can view still and motion images and play music saved on a USB flash memory and an SD card.
Viewing Contents Insert Media (SD card or USB flash memory) • Auto play setting Image viewer auto play (p. 53) Display Media player Select Drive (Display connected drive) Media player select Drive select OK OK Select RETURN SD memory card Select the Media Media player Basic select Media select OK OK Select RETURN Photos Videos Music SD memory card Select the data (Photos/Videos/Music) How to view the data differs depending on data storage conditions.
Photos view [Photos thumbnail] Media p layer [Features] Photos Select SUB MENU Slideshow ● Slideshow setting ● Sort ● Drive select ● Media select All photos OK SD memory card Info RETURN Sort * In DMR mode, Slideshow is not available DMR: Digital Media Renderer p. 38 Drive select Media select [Photos playback screen] Photo status Slideshow Single view ● To display/hide Single view Guide and Banner Navigation Guide Slideshow Single view * In DMR mode, Rotate/OK/Next/ Prev.
Sort Display “Sort select” menu and select item Displayed each view select Media player Photos • Folders (ascending order of numeric/alphabetical) • Sort by month (ascending order of the month) • Sort by date Sort by Date Folders Sort by date 23/10/2009 25/10/2009 01/11/2009 05/11/2009 10/11/2009 24/11/2009 01/12/2009 03/12/2009 20/12/2009 22/12/2009 22/11/2009 23/11/2009 Sort by month OK Select OK SUB MENU Slideshow RETURN Sort Info Drive select SD memory card Media select (e.g.
Videos view [Videos thumbnail] Media p layer [Features] Videos Trip1 Trip2 Trip3 Trip4 Trip5 Room Nature1 Nature2 Nature3 Nature4 Nature5 Nature6 2009_4 2009_7 * In DMR mode, Resume playback is not available ● Play ● Drive select ● Media select ● Aspect change Titles/Folders view 2009_9 Select SUB MENU Play OK SD memory card Info RETURN Drive select Media select [Videos playback screen] SD 01/04/2010 15:34 Movie banner 00:00.10 00:00.
Music view [Music thumbnail] Media player My Music_1 [Features] Music My Music_2 Select SUB MENU Play Folder ● Play folder ● Drive select ● Media select Folders My Music_3 OK SD memory card Info RETURN Drive select Media select [Music playback screen] Navigation area AAAAAA BBBBBBB XXXXXXX Forward Play/Pause Stop Reverse RETURN 00:00.05 / 00:00.49 RETURN • Forward/Reverse Five level of 1 to 5 (x2, x5, x30, x70, x100) are available. * In DMR mode, Next skip/Prev.
VIERA LinkTM “HDAVI ControlTM” Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on the TV remote. Enjoy additional HDMI Inter-Operability with compatible Panasonic products. This TV supports “HDAVI Control 5” function. Connections to equipment (DVD recorder DIGA, HD Camcorder, Home theater system, Amplifier, etc.) with HDMI cables enables VIERA Link controls. Equipment with the “HDAVI Control” function enables the following operations: Version Operations (See p.
VIERA Link™ Connections (with VIERA Link function) ■ Terminal overview Back of the TV VIERA LinkTM “HDAVI ControlTM” ■ Connecting DVD Recorder (DIGA) HDMI cable DVD recorder (DIGA) with VIERA Link function ■ Connecting Home theater system/AV amp HDMI 1 is recommended.
VIERA Link settings and Available features To use all VIERA Link functions: After everything is connected, in VIERA Link settings menu, set “VIERA Link” to “On”. Some features are disabled depending on the “HDAVI Control” version of the equipment. Please check the list (p. 32) Display the menu Select “VIERA Link settings” in “Setup” Menu Setup 2/2 VIERA Link settings select ECO / energy saving Keyboard type U.S.
Automatic Input Switching When using a Blu-ray Disc player, DVD player/recorder or Home theater system, the TV will automatically change to the appropriate input, when playback begins on one of those devices. • For a Home theater system the speakers automatically switch to the theater system. Power on link Yes: The TV is turned on automatically and switches to the appropriate HDMI input whenever VIERA Link compatible equipment is initially turned on and the Play mode is selected.
VIERA Link menu and Available features Some features are disabled depending on the “HDAVI Control” version of the equipment. Please check the list (p. 32) Display the VIERA Link menu or select next Select the item select VIERA Link control Recorder Speaker output TV Back to TV in the VIERA Link menu may be grayed out • Items if no compatible equipment is connected (must be HDAVI Control 2 or later) or if the equipment has not initiated a connection with the TV.
Speaker control You can select the Home theater or TV speakers for audio output. Control the theater speakers with the TV remote control. This function is available only when a Panasonic Amplifier or Player theater is connected. select change Recorder Volume up / down Mute Select “Speaker output” Select “Home theater” or “TV” VIERA Link control ■ Home theater: Adjustment for the equipment Speaker output sound of the TV is muted. • The the equipment is turned off, the TV speakers • When take over.
Using Network services Available Network service and features ■ VIERA Connect p. 43 Easily expandable cloud-based services and carefully selected apps. ■ Using DLNA feature (Home network) p. 44 This TV is a DLNA Certified™ product. DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network. To learn more, visit www.dlna.org.
Network Connections Contact your Broadband service provider NOTICE: If you don’t have Internet service by your local provider, please order a high-speed Internet service at no less than the following connection speed. If you already have such service, make sure that the connection speed exceeds the following. ● Required speed (effective): at least 1.5 Mbps for SD and 6 Mbps for HD picture quality, respectively. ● Dial-up Internet service cannot be used for VIERA Connect.
Network settings This is a setting for connecting to a broadband environment.
Wireless network (Wireless network setting) ■ Sets / Changes wireless network setting Press “Wireless network” and display setting screen Follow the directions on screen to complete the setting Wireless network select Please choose connection method: OK Search for wireless networks WPS (Wi-Fi Protected Setup using push button) WPS (Wi-Fi Protected Setup using PIN number) Manual settings * Wi-Fi Protected Setup is an easy setting of the Wi-Fi Alliance’s certification ● For more details on setting of an
Network link ■ Edit the name of this TV ■ Switches DLNA remote control (Disable/Enable) Sets your favorite name for this TV. This name will be used to display the name of this TV on the screen of the other Network compatible equipment.
VIERA Connect (Enjoy Internet Service) You can access Internet services from the VIERA Connect Home screen. ● You need broadband environment to use this service. Preparations ● Network connections (p. 39) ● Network settings (p. 40-42) Display the Home screen Select the item and press OK select ■ Press to exit from Video communication (e.g. Skype™) requires an exclusive Communication Camera TY-CC10W (p. 8). MORE BACK a menu screen ■ Press to go back to the Home screen This screen is an example.
Using DLNA feature You can share the contents (Photo, Video, Music etc.) stored in DLNA Certified media server with your home network system. Preparations ● Network connections (p. 39) ● Network settings (p. 40-42) Display VIERA TOOLS Select the “DLNA” select next Select server Display available server.
Network Camera You can operate the Network camera from the TV remote and also check the images from the Network camera on your TV. ● VIERA Link control only with the TV’s remote control (p. 37) Preparations ● Network connections (p. 39) ● Network settings (p.
Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions.
Manual program (Set manually) Use this procedure when changing the channel setup or changing the channel display. Also, use this to add or skip channels from the channel list manually. You can select a channel tuning mode (Digital only/Analog only) in “Channel surf mode”(p. 53) Edit ● Caption Edit CH caption Channel Select Apply Favorite Add ... Yes 3 ... ... Yes 4 ... ... Yes 5 ... ... select next Caption Select or edit the station identifier.
How to Use Menu Functions Various menus allow you to set the picture, sound, and other functions so that you can enjoy watching TV best suited for you. Display the menu ● Shows the functions that can be adjusted. ● Some functions will be disabled depending on the type of input signal. Menu structure Menu Menu bar Press OK to move to the Menu items. Input labels HDMI 1 HDMI 2 HDMI 3 Menu items Press OK to proceed to the next screen if available.
● “Reset to default” will be grayed out if no changes are made in the following menus: “Picture”, “Pro settings”, “Audio” and “Closed caption”. Picture settings Adjust the image or picture quality Settings Items Reset to defaults Picture mode Vivid Standard Cinema Game Custom (Photo) Color mgmt. Photo enhancement C.A.T.S. Video NR Pro settings (Adjust the “Picture mode” setting in more detail.) Resets all picture adjustments to factory default settings except for “Advanced picture”.
Settings HDMI settings Items Item Description HDMI/DVI RGB Auto/ range (HDMI 1-3) Standard (16-235)/ Nonstandard Contents type (HDMI 1-3) Off/Auto/Photo/ Graphics Color matrix SD/HD Block NR Mosquito NR Off/On Off/On Motion smoother Black level 3:2 pulldown 24p Direct in Off/Weak/Strong Dark/Light Off/On/Auto 60Hz/48Hz Prevents the blown out highlights and blocked up shadows when a wide-range signal is received. Selects between standard RGB range (16-235 bits) or non-compliance (0-255 bits).
Audio settings Adjust Audio quality Settings Items Reset to defaults Bass Treble Balance Advanced audio A.I. sound Surround Bass boost Item Description Resets Bass, Treble, and Balance adjustments to factory default settings. Increases or decreases the bass response. Increases or decreases the treble response. Emphasizes the left / right speaker volume. Off/On Equalizes overall volume levels across all channels and external inputs. Off/On Off/On Enhances audio L/R response when listening to stereo.
Lock Locks specified channels or shows to prevent children from watching objectionable content. You will be asked to enter your password each time you display the Lock menu. • Password setting/entering (p. 21) Set “Custom” in “Mode” to specify “Channel”, “Game”, “Program” and “VIERA Connect” settings. Settings Mode Channel (These channels will be blocked regardless of the program rating.
Setup Settings 3D settings Channel surf mode Language Clock ANT/Cable setup Input labels (Display labels of connected devices) Items Item Description See p.25 for more detail. Sets the mode to select the channel with the Channel up/down button. All/Favorite/ Favorite: Only channels registered as FAVORITE. (p. 20) Digital only/ Analog only English/Español/ Selects the screen menu language. Français Adjusts the clock. (p. 17) See p. 46-47 for more detail.
Ratings List for parental control “V-chip” technology enables you to lock channels or shows according to standard ratings set by the entertainment industry. ■ U.S. MOVIE RATINGS (MPAA) NR G PG PG-13 R NC-17 X NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie which has not been rated or where rating does not apply. GENERAL AUDIENCES. All ages admitted. PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children. PARENTS STRONGLY CAUTIONED.
Technical Information Aspect Ratio (FORMAT) Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the format of the received signal and your preference. (p. 20) (e.g.: in case of 4:3 image) ● FULL ● JUST JUST FULL Enlarges the 4:3 image horizontally to the screen’s side edges. Stretches to justify the 4:3 image to the four corners of the (Recommended for anamorphic picture) screen.
Data format information ● Compatible Data format for Media player (SD card/USB flash memory)/DLNA p. 30 DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard EXIF: Exchangeable Image File Format Note ● Format the card with the recording equipment. ● The picture may not appear correctly on this TV depending on the recording equipment used. ● Display may take some time when there are many files and folders.
VIERA LinkTM “HDAVI ControlTM” HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 33) ● This function may not work normally depending on the equipment condition. ● The equipment can be operated by other remote controls with this function on even if the TV is in Standby mode. ● Image or sound may not be available for the first few seconds when playback starts. ● Image or sound may not be available for the first few seconds when input mode is switched.
4:3 side bars Do not display a picture in 4:3 mode for an extended period, as this can cause “Image retention” to remain on either or both sides of the display field. To reduce the risk of such “Image retention”, change the brightness of the side bars. See page 49 for more information ● The side bar may flash (alternate black/white) depending on the picture.
Frequently Asked Questions (FAQ) If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, visit the Panasonic website for further assistance.
Questions Why is there no sound coming from the TV? Make sure the volume is up and MUTE is off. Confirm the TV speakers are set to ON by pressing MENU and selecting “Audio” --> “Advanced audio”. (p. 51) Check that the correct SAP (Secondary Audio Program) is selected by pressing the SAP button on the remote control. (p. 19) If the TV is connected to a Panasonic Home Theater via HDMI cable, then check VIERA Link controls. (p.
Questions How do I get VIERA Connect to work on my TV? Answers 1. You need a broadband (high speed) Internet service with a speed of no less than 1.5 Mbps (p. 39). 2. Connect the TV to the Internet through your router by an Ethernet cable or a Panasonic Wireless LAN Adapter (included). 3. Run the “Connections Test”, under the Network Settings menu.
Specifications TC-P60ST30 Power Source TC-P65ST30 AC 120 V, 60 Hz Power Plasma Display Consumption panel Rated Power Consumption 447 W 498 W Standby condition 0.2 W 0.2 W Drive method AC type Aspect Ratio 16:9 Visible screen size (W × H × Diagonal) 60 ” class (60.1 inches measured diagonally) 65 ” class (64.7 inches measured diagonally) 52.3 “ x 29.4 “ x 60.1 “ (1,330 mm x 748 mm x 1,526 mm) 56.4 “ x 31.7 “ x 64.7 “ (1,434 mm x 806 mm x 1,645 mm) (No.
Wireless LAN Adapter Power supply DC 5V (USB powered) 500mA Antenna Tx 1, Rx 2 Interface USB 2.0 Standard Compliance IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b Transmission system MISO-OFDM system, OFDM system, DSSS system Frequency Range IEEE802.11n / IEEE802.11a : 5.150GHz - 5.725 GHz for EU Countries 5.150GHz - 5.850 GHz for USA, Canada 5.250GHz - 5.850 GHz for Taiwan IEEE802.11g / IEEE802.11b / IEEE802.11n: 2.412 GHz - 2.472 GHz for EU countries 2.412 GHz - 2.
Index A B C D E F H I L M N P R 64 Accessories ............................................................. 8 Ant/Cable .......................................................... 15,46 Antenna .............................................................11,15 Audio ...................................................................... 51 Audio, Advanced .................................................... 51 Auto Power ON ...................................................... 53 Auto Program ....
Limited Warranty (for U.S.A.
Customer Services Directory (for U.S.A. and Puerto Rico) Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/help or, contact us via the web at: http://www.panasonic.
Limited Warranty (for Canada) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price.
USA Only: Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149. Sólo Estados Unidos: La disposición puede estar regulada en su comunidad debido a consideraciones ambientales. Para información sobre la disposición o reciclaje, por favor visite la página web de Panasonic: http://www.panasonic.com/environmental ó llame al 1-888-769-0149.