Operating Guide

12
Touch Panel Setup
■
Firmware option setting
“Coarse sensitivity” and “Threshold” settings for the sensor operation can be set in the Firmware options screen.
Select “Hardware” from the UPDD console screen.
Then select “Firmware options”. The Firmware options screen appears.
Firmware
options screen
Closes the window without saving settings.
Saves settings.
Closes the window after saving settings.
Displays the description (Help) of functions.
Coarse sensitivity.
Threshold setting.
Displays the touch sensor level.
Averages the touch panel sensor level.
Resets the touch panel controller.
Resets the “Coarse sensitivity” and “Threshold” settings to their defaults.