Operation Manual

30
Enables fi ne picture adjustment at a professional level.
Notes:
The adjustment values are memorized separately for each input terminal.•
The adjustment range values should be used as an adjustment reference.•
Select the item and set.
Advanced settings
Carry out “W/B” adjustment as follows.
1. Adjust the white balance of the bright sections using the “W/B High R” , “W/B High G” and “W/B High B” settings.
2. Adjust the white balance of the dark sections using the “W/B Low R” , “W/B Low G” and “W/B Low B”
settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.
● Black
extension
Adjusts the dark shades of the image in gradation.
Less
More
● Input level
Adjustment of parts which are extremely bright and hard to see.
Less
More
● Gamma
S Curve 1.0* 2.0 2.2 2.6
* When 2k1k signals are received with the Dual Link HD-SDI
Terminal Board (TY-FB11DHD), Gamma “1.0” cannot be
selected.
Down Up
● “W/B” adjustment
Less More
0
0
W/B High R
W/B High G
0W/B High B
0W/B Low R
0W/B Low G
0W/B Low B
Adjusts the white balance for light red, light
green or light blue areas.
Adjusts the white balance for dark red, dark
green or dark blue areas.
Normal
Advanced settings
Picture Mode
25
0
5
Normal
Contrast
Normalise
Brightness
6Colour
0Hue
Sharpness
White balance
0
2.2
Input level
Advanced settings
Normalise
Gamma
0
0
Off
W/B High R
W/B High G
0W/B High B
0W/B Low R
0W/B Low G
0W/B Low B
Cinema reality
OffStudio Gain
0Black extension
OffNoise reduction
Colour Gamut
2
access
1
select
2
change
1
select
Picture Adjustments