Operation Manual

21
1/2Picture
Normal
Normalise
Normal
25
0
0
0
5
Brightness
Sharpness
Picture Mode
Colour
Contrast
Tint
2/2Picture
Advanced settings
White balance
Colour Management
Normal
Off
On
1
2
Advanced settings
Normal
Normalise
0
0
2.2
Off
1/2
Black extension
AGC
Gamma
Input level
Advanced settings
0
0
0
0
0
0
2/2
W/B Low B
W/B High R
W/B Low R
W/B Low G
W/B High G
W/B High B
Press to select “On”.
Advanced settings On
Enables fi ne picture adjustment at a professional
level (see next page).
Advanced settings Off
Displays images with settings of the Picture menu.
Press to enter
Advanced Settings.
Picture Adjustments
Select to adjust each item.
Press “ ” or “ ” button to switch between modes.
Press “ ” or “ ” button to switch between modes.
Normal
For viewing in standard (evening lighting) environments.
This menu selects the normal levels of Brightness
and Contrast.
Dynamic
For viewing in brighter environments.
This menu selects higher than normal levels of
Brightness and Contrast.
Cinema
Ideal for movies.
Note:
If you would like to change the picture and colour of the
selected Picture menu to something else, adjust using the
items in the Picture menu. (see next page)
Colour Management On
Enables vivid colour adjustment automatically.
Press to display the Picture menu.
Press to select the menu to adjust.
Select the desired level by looking at
the picture behind the menu.
Note:
Menu that cannot be adjusted is grayout. Adjustable menu
changes depending on signal, input and menu setting.
Normal Cool Warm
Normal
Cinema Dynamic
While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
Helpful Hint ( /
Normalise
Normalisation)