Operating instructions

17
Standby (ON / OFF) button
The Display must  rst be plugged into
the wall outlet and turned on at the
power switch (see page 13).
Press this button to turn the Display On,
from Standby mode. Press it again to
turn the Display Off to Standby mode.
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 18)
POS. /SIZE button
(see page 21, 22)
PICTURE button
(see page 23, 24)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when power is
turned off or volume level is changed.
N button
(see page 22, 23, 24, 25)
POSITION buttons
INPUT button
Press to select input signal sequentially.
(see page 15)
ECO MODE (ECO)
Press to change the ECO MODE
setup status. (see page 31)
FUNCTION buttons (FUNCTION)
(see page 44)
Digital Zoom (see page 19)
Remote Control Transmitter
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 21)
SET UP button (see page 26 - 41)
SOUND button (see page 25)
Volume Adjustment
Press the Volume Up “+” or Down
“–” button to increase or decrease
the sound volume level.
R button (see page 20)
Press the R button to return to
previous menu screen.
OFF TIMER button
The Display can be preset to switch to stand-by
after a  xed period. The setting changes to 30
minutes, 60 minutes, 90 minutes and 0 minutes (off
timer cancelled) each time the button is pressed.
30 min 60 min
0 min
90 min
When three minutes remain, “Off timer 3 min” will
 ash.
The off timer is cancelled if a power
interruption occurs.
RECALL button
Press the “RECALL” button to
display the current system status.
1
Input label
2
Aspect mode (see page 18)
3
Off timer
The off timer indicator is
displayed only when the off
timer has been set.
4
Clock display (see page 43)
Basic Controls
Off timer
90min
1
2
3
4
10:00
PC
4:3