Operating instructions

2323
100
70
50
Picture
Normal
Normalise
Normal
Brightness
Picture Mode
Contrast
Backlight
Advanced settings
White balance
Normal
Sharpness
50
FRAME CREATION
Max
FRAME CREATION
Improves motion picture quality by reducing motion blur.
Press the left or right button to switch between
modes.
Off Min Mid
Max
Notes:
• The mode is memorized per input terminal.
• Even if “Normalise” is selected, the Normal setting will
not be restored.
• The picture and menu will disappear for a moment
if you switch the mode to Off, or switch from Off to
another mode.
• “FRAME CREATION” is not available for 42-inch
models.
Press the left or right button to switch between modes.
Normal
Cinema
Dynamic
Normal
For viewing in standard environments.
Dynamic
For viewing in brighter environments.
Cinema
For use in viewing tone-focused pictures with
brightness reduced.
Note:
If you would like to change the picture and colour of the
selected Picture menu to something else, adjust using
the items in the Picture menu. (see next page)
Picture Adjustments
1
Advanced settings
Enables  ne picture adjustment at a professional
level (see next page).
While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION
( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
Helpful Hint ( /
Normalise
Normalization)
Press the left or right button to switch between modes.
Normal Warm Cool
Press to display the Picture menu.
Press to select the menu to adjust.
Select the desired level by looking at the picture behind the menu.
Select to adjust each item.
Note:
Menu that cannot be adjusted is grayout. Adjustable menu
changes depending on signal, input and menu setting.
2
Press to enter Advanced
Settings.
Gamma
Input level
Advanced settings
Normal
Normalise
0
2.2
W/B Low B
W/B High R
W/B Low R
W/B Low G
W/B High G
W/B High B
50
50
50
50
50
50