Operating instructions

FAQs, etc.
30
31
Technical Information
Aspect Ratio
Signal name
Aspect modes
Aspect Control Signal
Widescreen signal (WSS)
Control signal through SCART
(pin 8) or HDMI terminal
Auto
aspect
16:9 14:9 4:3 Zoom1 Zoom2 Zoom3 TV AV1 AV2 AV3 AV4 Component AV1 AV2 AV3
HDMI
1
HDMI
2
TV/AV1/AV2/
AV3/AV4
PAL I O O O O O O O O O O O O
-
O O O
- -
PAL 525/60 O O O O O O O
- - - - - -
O O O
- -
M.NTSC O O O O O O O
- - - - - -
O O O
- -
NTSC(AV input only) O O O O O O O
- - - - - -
O O O
- -
Component/HDMI
SD
525(480)/60i O O O O O O O
- - - - - - - - -
O O
525(480)/60p O O O O O O O
- - - - - - - - -
O O
625(576)/50i O O O O O O O
- - - - -
O
- - -
O O
625(576)/50p O O O O O O O
- - - - -
O
- - -
O O
HD
750(720)/50p O O O O O O O
- - - - - - - - -
O O
750(720)/60p O O O O O O O
- - - - - - - - -
O O
1125(1080)/50i O O O O O O O
- - - - - - - - -
O O
1125(1080)/60i O O O O O O O
- - - - - - - - -
O O
PC input
-
O
-
O
- - - - - - - - - - - - - -
Note
•
The ratio varies depending on the programme, etc. If the ratio is greater than the standard "16:9",
black bands may appear at the top and bottom of the screen.
•
If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR,
adjust the tracking of the VCR. (See the VCR manual.)
•
Aspect mode can be memorized for SD (Standard definition) and HD (High definition) signals separately.
•
To select the ratio manually: (Only "16:9" or "4:3" in PC mode)
The optimum size and aspect can be chosen, and you can enjoy finer images. (p. 11)
■
Auto aspect: Auto aspect determines the best aspect ratio to use to fill your screen. It does this using a four step
process to determine if the picture being viewed is a widescreen picture.
If Auto aspect detects a widescreen signal it switches into the appropriate 16:9 or 14:9 widescreen mode. If Auto
aspect does not detect a widescreen signal then this advanced TV set enhances the picture for optimum viewing
pleasure.
The text shown on the screen indicates how Auto aspect determined which ratio to use:
"WIDE" appears in the top left of the screen if a widescreen identification signal (WSS) is found or a signal found
through a SCART terminal. Auto aspect switches to the appropriate 16:9 or 14:9 widescreen ratio. This function
will also work in any aspect mode. "Auto aspect" appears in the top left of the screen if black stripes above and
below the picture are detected. Auto aspect chooses the best ratio and expands the picture to fill the screen. This
process can take several minutes, depending on the darkness of the picture.
4:3
14:916:9
Zoom3
Zoom2Zoom1
Directly displays the
image at "16:9" without
distortion (anamorphic).
Displays a "16:9"
letterbox or "4:3" image
without distortion.
Displays the image at
the standard "14:9"
without enlargement.
Displays a "16:9"
letterbox (anamorphic)
image full-screen
without distortion.
Displays the image at
the standard "4:3"
without distortion.
Displays a "2.35:1" letterbox (anamorphic) image full-
screen without distortion. At "16:9", displays the image at its
maximum (with slight enlargement).
4 : 3
14 : 9
16 : 9
Zoom3
Zoom2
Zoom1
Auto aspect
The best ratio is
chosen and the picture
expanded to fill the
screen.
Auto aspect
•
Technical Information
SCART, S-VIDEO and HDMI terminal information
Input signal that can be displayed
Socket Earth
CVBS out (video)
CVBS earth
Red in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
CVBS in (video)
RGB status earth
Status RGB
Earth
--
--
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
21
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
■
AV1 SCART terminal
(RGB, VIDEO)
Suitable inputs for AV1 include RGB (Red / Green / Blue).
Socket Earth
CVBS out (video)
CVBS earth
S.C. - in
Earth
--
Earth
--
Earth
Audio out (L)
Audio out (R)
CVBS in (video)
Earth
--
Earth
--
Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
21
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
■
AV2 SCART terminal
(VIDEO, S-VIDEO, Q-Link)
AV2 - Pins 15 and 20 are dependent on AV2 S-VHS /
VIDEO switching.
Chrominance in
Socket Earth
CVBS out (video)
CVBS earth
Red in, S.C. - in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
CVBS in (video)
Earth
Status RGB
Earth
--
Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
21
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
Luminance in
Chrominance earth Luminance earth
■
AV4 S-VIDEO 4 pin terminal
■
AV3 SCART terminal
(RGB, VIDEO, S-VIDEO, Q-Link)
AV3 - Pins 15 and 20 are dependent on AV3 S-VHS /
VIDEO switching.
∗
Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC (D-sub 15P)
Note
•
Signals other than above may not be displayed properly.
•
The above signals are reformatted for optimal viewing on your display.
Signal name
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Component HDMI PC
525 (480) / 60i 15.73 59.94
∗ ∗
525 (480) / 60p 31.47 59.94
∗ ∗
625 (576) / 50i 15.63 50.00
∗ ∗
625 (576) / 50p 31.25 50.00
∗ ∗
750 (720) / 60p 45.00 60.00
∗ ∗
750 (720) / 50p 37.50 50.00
∗ ∗
1,125 (1,080) / 60i 33.75 60.00
∗ ∗
1,125 (1,080) / 50i 28.13 50.00
∗ ∗
640 × 400 @70 Hz 31.46 70.07
∗
640 × 480 @60 Hz 31.47 59.94
∗
640 × 480 @75 Hz 37.50 75.00
∗
800 × 600 @60 Hz 37.88 60.32
∗
800 × 600 @75 Hz 46.88 75.00
∗
800 × 600 @85 Hz 53.67 85.06
∗
1,024 × 768 @60 Hz 48.36 60.00
∗
1,024 × 768 @70 Hz 56.48 70.07
∗
1,024 × 768 @75 Hz 60.02 75.03
∗
1,024 × 768 @85 Hz 68.68 85.00
∗
1,280 × 1,024 @60 Hz 63.98 60.02
∗
Macintosh13” (640 × 480) 35.00 66.67
∗
Macintosh16” (832 × 624) 49.72 74.54
∗
Macintosh21” (1,152 × 870) 68.68 75.06
∗
Hot Plug Detect
DDC/CEC Ground
SCL
CEC
TMDS Clock Shield
TMDS Data0−
TMDS Data0+
TMDS Data1 Shield
TMDS Data2−
TMDS Data2+
+5V Power
SDA
Reserved (in cable but N.C. on device)
TMDS Clock−
TMDS Clock+
TMDS Data0 Shield
TMDS Data1−
TMDS Data1+
TMDS Data2 Shield
19
17
15
13
11
9
7
5
3
1
18
16
14
12
10
8
6
4
2
■
HDMI terminal