Operating Instructions

Advanced
INPUT
OPTION
SD CARD
EXIT
RETURN
100-0002
Filename
Date
Pixel
100-0001
1/17
10/23/2006
1600 x 1200
100-0004100-0003100-0001
100-0008100-0007100-0006100-0005
100-0012100-0011100-0010100-0009
Photo View Mode
Select
View
EXIT
Select
RETURN
Reading
Slide show
28
29
Viewing from card (Photos)
Rotate
Rotate
Select
Slide show
View
EXIT
List
Slide show
red
For details,
see p. 29
Viewing from card
The still images recorded by the digital camera will be displayed.
View
4
Insert the SD Card
Warning message for output signal is displayed.
Select the photo to be viewed
3
Displayed one at a time
1
2
Enter SD mode (Photo View Mode)
select
view
Operation
guide
(Thumbnail screen)
Caution
During the operation, no signals are output from the monitor output terminals.
“Date” shows the date on which the recording was made by the digital camera. It
shows “**/**/****” when recordings are made without date signal.
To return to
thumbnail screen
RETURN
To return to TV
EXIT
or
SD CARD
(Photos)
Error display
(images that could not be loaded, etc.)
Selected
photo
To display the operation guide or
OPTION
Cautions in handling SD Card
Do not remove the card while the TV is accessing data (this can damage card or TV).
Do not touch the pins on the back of the card.
Do not subject the card to a high pressure or impact.
Insert the card in the correct direction (otherwise, card may be damaged).
Electrical interference, static electricity, or erroneous operation may damage the data or card.
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the
TV. (Panasonic is not liable for any deterioration or damage of recorded data.)
Selected photo
information is displayed
Main Menu
Picture
Viewing Setup
red
Start Slide show (operate in step or )
Slide show settings (operate in step or )
Slide show
Select the photo for the rst view
Display the
menu
Select “Viewing Setup” Select the functions and set
“Picture Menu” (p. 20)
Menu Item Adjustments / Con gurations (alternatives)
Viewing
Setup
Interval Select slide show interval (5 / 10 / 15 / 30 / 60 / 90 / 120 seconds)
Repeat Slide show repeat (Off / On)
set
select
To pause
On screen messages
No valid le to play
The card has no data.
Cannot read le
The le is broken or unreadable.
The TV does not support the format.
(For the applicable formats and data, see p. 38.)
Is SD Card in?
Insert a SD card.
Message Meaning / Action
Interval 5 seconds
Repeat Off
Viewing Setup
access
select
To previous photo
Rotate 90˚ (anti-clockwise)
To next photo
Rotate 90˚
(clockwise)
Start Slide show
SD
Card
For details on SD Cards (p. 38)
Label surface
To open
Open the cover
Push until a
click is heard
To remove
To insert
Press the centre of the card
Blue LED
Note
Blue LED lights while SD Card is inserted if set “SD Card LED” to “On” in Setup Menu (p. 21).