Operating Instructions
44
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre
for assistance. For details (p. 48)
White spots or shadow
images (noise)
•
Check the position, direction, and
connection of the aerial.
Neither image nor
sound is produced
•
Is the unit in "AV mode"?
•
Is the mains lead plugged into the socket outlet?
•
Is the TV unit turned On?
•
Check Picture menu (p. 20) and volume.
•
Check all required SCART cables and
connections are fi rmly in place.
Auto aspect
•
Auto aspect is designed to provide you
with the best aspect ratio to use to fi ll your
screen. For user control please see p. 42.
S-Video / black and
white picture
•
Using TV/AV button please confi rm your selection is
S-Video I.e. AV2/S-Video or AV3/S-Video (p. 17).
On Screen messages - I.e. AV1/EC1
•
You can simply clear these by pressing .
Press again to redisplay.
Direct TV record / Q-Link functions
not recording
•
Please confi rm SCART cable and connection. Also please
set "AV2/AV3 out" in the Setup menu (p. 22).
No programmes shown on TV Guide
DVB TV Guide
:Landscape
Wed 12/05/04 10:46
Wed 12th
Time: 19:30 20:00
Prog. type
Category
All Services
20:30 21:00 21:30
All Types
Category
All Services
•
Check the DVB transmitter.
•
Adjust the direction of the aerial to another transmitter installed nearby.
•
Check the analogue broadcast.
If the image quality is poor, check the aerial and consult your nearest dealer.
Problem Actions
logo appears at the
four corners of the screen
Screen
Contrast is reduced
Permanently lit spots on
screen
•
Due to production process involved in this technology
this may result in some pixels which are permanently lit
or unlit. This is not a malfunction.
•
The function to prevent after-image (p. 5) is activated.
(Not a faulty symptom)
•
The screen saver is activated when the following
conditions without any user operation for a few minutes:
Ɣ no signal in DVB or AV mode
Ɣ selected locked channel
•
Contrast is lowered when the following conditions
without any user operation for a few minutes:
Ɣ selected radio channel
Ɣ displayed menu (except Tuning menu, Owner ID and
Shipping condition)
Ɣ selected invalid or bad signal channel