Operating instructions

FAQs, etc.
•
Technical Information
45
Updating the software system (DVB mode)
Update system software regularly to ensure that you have latest version software.
If there is an update available, a notifi cation banner is displayed when the service has the update information.
•
To download new software, press “OK” Downloading (approx. 20 mins.)
If you choose not to download, press “EXIT”.
ŶTo update automatically
Set “Auto Update Search in Standby” to “On” (p. 27)
If there is a new version software being broadcast, the TV will download this automatically.
•
The automatic updating sequence is carried out at 3:00 AM and 5:00 AM every night under the following conditions.
Standby (TV turned Off with the remote control)
Recording is not in progress.
ŶTo update manually
Perform “System Update Search Now” (p. 27)
If there is an update available, a notifi cation banner is displayed.
•
To download new software, press “OK” Downloading (approx. 20 mins.)
If you choose not to download, press “EXIT”.
Note
•
During downloading, do not turn Off the TV or touch any buttons.
(The TV is automatically activated after downloading is completed.)
•
The message might be the notifi cation beforehand. In this case, the schedule information (the date that the new
version can be used) will appear. You can set the reservation for update. The update will not start when the TV is
set to Off.
SCART, S-VIDEO and HDMI terminal information
ŶAV1 SCART terminal
(RGB, VIDEO, Q-Link)
Suitable inputs for AV1 include RGB (Red / Green / Blue).
ŶAV2 SCART terminal
(RGB, VIDEO, S-VIDEO, Q-Link)
AV2 - Pins 15 and 20 are dependent on AV2 S-VHS /
VIDEO switching.
20 CVBS in (video)
18 RGB status earth
16 Status RGB
14 Earth
12 --
10 Q-Link data
8 Status CVBS
6 Audio in (L)
4 Audio earth
2 Audio in (R)
Socket Earth 21
CVBS out (video) 19
CVBS earth 17
Red in 15
Red earth 13
Green in 11
Green earth 9
Blue in 7
Blue earth 5
Audio out (L) 3
Audio out (R) 1
20 CVBS in (video)
18 RGB status earth
16 Status RGB
14 Earth
12 --
10 Q-Link data
8 Status CVBS
6 Audio in (L)
4 Audio earth
2 Audio in (R)
Socket Earth 21
CVBS out (video) 19
CVBS earth 17
Red in, S.C. - in 15
Red earth 13
Green in 11
Green earth 9
Blue in 7
Blue earth 5
Audio out (L) 3
Audio out (R) 1
ŶAV3 S-VIDEO 4 pin terminal ŶHDMI terminal
Chrominance in Luminance in
Chrominance earth Luminance earth
18 +5V Power
16 SDA
14
Reserved (in cable but N.C. on device)
12 TMDS Clockí
10 TMDS Clock+
8 TMDS Data0 Shield
6 TMDS Data1í
4 TMDS Data1+
2 TMDS Data2 Shield
Hot Plug Detect 19
DDC/CEC Ground 17
SCL 15
CEC 13
TMDS Clock Shield 11
TMDS Data0í 9
TMDS Data0+ 7
TMDS Data1 Shield 5
TMDS Data2í 3
TMDS Data2+ 1