Operating Instructions

Connections

Plug the AC cord into the display unit.

Plug the AC cord until it clicks.

Note:

Make sure that the AC cord is locked on

both the left and right sides.

AC cord ﬁ xing

Unplug the AC cord

Unplug the AC cord pressing the

two knobs.

Note:

When disconnecting the AC cord, be

absolutely sure to disconnect the AC

cord plug at the socket outlet ﬁ rst.

Attach the clamper

To remove from the unit:

Keep pushing

both side snaps

hole

Bundle the cables

snaps

hooks

Set the

tip in the

hooks

To loosen:

Keep

pushing

the knob

knob

Insert the clamper

in a hole.

AC cord connection and ﬁ xing, cable ﬁ xing

When using the Wall-hanging bracket (vertical) (for 50 inch model)

Note:

When using the Wall-hanging bracket (vertical)(TY-WK42PV20), use the holes and to secure the cables. If

the clamper is used on the hole , the cables may be caught by the wall-hanging bracket.

50 inch model 65 inch model

Using the clamper

Secure any excess cables with clamper as required.

Note:

One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.

If you need more clampers, purchase them from your dealer. (Available from the customer service)