Operating Instructions

22
Basic Controls
Remote Control Transmitter
Digital Zoom (see page 24)
1
2
PC
4:3
♪ COMPONENT
Memory name: MEMORY2
Off timer 90min
3
4
10:00
Standby (ON / OFF) button
The Display must fi rst be plugged into
the wall outlet and turned on at the
power switch (see page 18).
Press this button to turn the Display
On, from Standby mode. Press
it again to turn the Display Off to
Standby mode.
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 23)
POS./SIZE button
(see page 48)
PICTURE button
(see page 51)
Sound mute On / Off
Press this button to mute the
sound.
Press again to reactivate sound.
Sound is also reactivated when
power is turned off or volume level
is changed.
N button
(see page 50, 51, 52, 56)
POSITION buttons
INPUT button
Press to select Input signal
sequentially. (see page 20)
ECO MODE (ECO)
Press to change the ECO MODE
setup status. (see page 63)
FUNCTION buttons (FUNCTION)
(see page 65)
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 48)
SET UP button (see page 57)
SOUND button (see page 56)
Volume Adjustment
Press the Volume Up “+” or Down “–”
button to increase or decrease the
sound volume level.
R button (see page 46)
Press the R button to return to
previous menu screen.
OFF TIMER button
The Display can be preset to switch to stand-by
after a fi xed period. The setting changes to 30
minutes, 60 minutes, 90 minutes and 0 minutes
(off timer cancelled) each time the button is
pressed.
30 min 60 min
0 min (Cancel)
90 min
When three minutes remain, “Off timer 3 min”
will fl ash.
The off timer is cancelled if a power interruption
occurs.
RECALL button
Press the “RECALL” button to display
the current system status.
1
Input label
2
Aspect mode (see page 23)
Audio input (see page 77)
Profi le name (see page 55)
3
Off timer
The off timer indicator is
displayed only when the off
timer has been set.
4
Clock display (see page 74)