Operating Instructions

24
s1 s2 s3 s4
1
Exit
2
Exit
2
Digital Zoom
1
3
2
4
This displays an enlargement of the designated part of the displayed image.
Display the operation guide.
Press to access Digital Zoom.
The operation guide will be displayed.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Select the magnifi cation required for the enlarged display.
Each time this is pressed, the magnifi cation factor changes.
This is shown in the image being displayed.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
The cursor will move.
Notes:
• When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
• The Digital Zoom function cannot be selected while in the following operation state:
When WHITEBOARD input.
When two screen display.
When Screensaver (except for Negative image) is running (see page 61)
When the thumbnail view or fi le list view of Memory Viewer is displayed
• While Digital Zoom is in operation, “Adjusting Pos./Size” cannot be used.
During Digital Zoom, only the following buttons can be operated.
[Remote control]
[Unit]
POSITION /
ACTION button
OFF TIMER button
VOL button
MUTE button
VOL button
VOL
ENTER/
+
/
- /