Operating Instructions

26
Multi-touch Operation
The built-in touch panel function of the display enables the screen control with a fi nger or the supplied pen.
This section explains about the multi-touch operation on the display main unit.
Note:
To enable multi-touch operation, select “Setup” - “Touch Screen Settings” and set “Touch Screen” to “On”.
(see page 59)
Touch gestures
You can use the following touch operations.
Name Operation
Tap (single tap)
Touch once lightly
Control menu operation
Controlling the display setting menus.•
Starting the Touch Zoom mode.•
Starting the whiteboard.•
Memory Viewer operation
Showing/hiding the touch operation icons when the MEMORY VIEWER
input is selected.
You can tap the displayed icons to perform operation.
Memory Viewer
see page 30
Double-tap
Touch twice
Touch Zoom operation
Enlarging the image up to about three times its normal size during
Touch Zoom.
When the image is already enlarged, the zoom rate will be returned to
100%.
Touch zoom
see page 29
Scroll
Slide a fi nger
Touch Zoom operation
Moving the displayed position of the image while the image is enlarged.
Memory Viewer operation
Skipping forward or backward the fi le.
Memory Viewer
see page 30
Swipe from the screen edge
Slide a fi nger from the screen edge
Control menu display
Displaying the control menu.