Operating Instructions

30
Memory Viewer Function
The Memory Viewer function makes it is possible to display the video and pictures which are stored in the USB
memory when the USB memory is inserted into the display.
What you can display with the Memory Viewer function
The following fi les are supported.
Picture Extension Format
jpg/jpeg
Maximum resolution: 8000 × 8000
bmp
Maximum resolution: 8000 × 8000
support: 1, 4, 8, 16, 24, 32 bit
Video Extension Video codec Audio codec Video format Audio format
mov
H.264/AVC
MotionJpeg
AAC
Linear PCM
Maximum:
1920 × 1080/30 fps
Maximum:
48 kHz 2 ch
(It is up to 16 kHz
stereo when the
codec is linear
PCM)
avi
H.264/AVC
MotionJpeg
Mpeg4
mp3
AAC
Linear PCM
mp4
H.264/AVC
Mpeg4
AAC
Mpeg4 AAC-LC
mpg/mpeg
Mpeg2 Mpeg1 Layer2
wmv
WMV9 WMA
Notes:
The maximum size of fi le is 2 GB.•
The maximum number of fi le/folder is up to 1000. If it exceeds, the folder cannot display and an error message •
appears.
You cannot play the fi les which are protected by Digital Rights Management (DRM).•
The maximum number of fi les that can hold resume information is 50. If it exceeds 50, the oldest information will •
be deleted.
It may be impossible to resume playing the fi le from the stopped position.•
It may be impossible to play some fi les even if they are in the supported format.•
Applicable device
The function is compatible with USB memories sold in the market. (Devices with security feature are not supported)
Devices not formatted with FAT16 or FAT32 cannot be used.