Operating Instructions

42
Using Built-in WhiteBoard
Saving pen drawing content (Page Menu)
Page Menu will be enabled in the WhiteBoard mode or during drawing on the captured image.
The drawn content and its background can be saved in the built-in memory or USB memory and can be read as a see page.
Connect a USB memory to the USB (VIEWER) terminal on the side of the display.
USB Memory
see page 30
Notes:
To use the built-in memory, select “Setup” - “Touch Screen Settings” and set “Built-in MEMORY SETTING” to “On”. •
(see page 59)
For confi dentiality reasons, it is recommended that you delete unnecessary fi les saved in the built-in memory.•
The memory mode changes.
003 / 003
Built-in Memory
Page Menu
003 / 003
Built-in Memory
Page Menu
New Page
Save
Save as a new page
Delete this page
Delete all pages
Save to USB Memory
USB Memory mode
001 / 001
USB Memory
Page Menu
001 / 001
USB Memory
Page Menu
New page
Save
Save as a new page
Delete this page
Remove USB Memory
Built-in Memory mode
Page Menu
(Built-in Memory)
Page Menu
(USB Memory)
Common items in the built-in memory and USB memory
: Switches see pages of the drawn data saved in the memory storage when is tapped.
The left number is the current see page number and the right is the last see page number.
Notes:
The total number of all the see pages saved in the memory storage is not displayed.•
“Read-Only” will appear below “Page Menu” if you read the drawn data in the memory •
storage that is write-protected or does not have enough space for writing.
New page
: Creates a new see page.
Save
: Overwrites the current see page.
Save as new page
: Saves the drawn content as a new see page while keeping the original see page as it is.
Delete this page
: Deletes the current see page and displays the next see page.
Built-in Memory only
Delete all pages
: Deletes all the see pages saved in the built-in memory.
Save to USB Memory
: Copies the see pages saved in the built-in memory to the USB memory. You can copy
the current see page only or all the see pages.
When copying a fi le, a message will appear asking if you delete the fi le in the built-in
memory. Delete the copied fi le as necessary.
USB Memory only
Remove USB Memory
: Makes the USB memory ready for removal. Be sure to perform this operation before
removing the USB memory.
File save format
See pages are saved as fi le in the USB memory.
A JPEG fi le that is a synthetic image of the background image and the content drawn with pen will be saved under
the screen synthesis folder (/WHITEBOARD/JPEG).
Also in the internal processing folder (/WHITEBOARD/SYS_DATA), the background image will be saved in the
JPEG format and the drawn content in the PNG format.
The see page number will be shown in the fi le name.
Example: File of the second see page
Synthetic image fi le: /WHITEBOARD/JPEG/WB_002.JPG
Background fi le for internal processing: /WHITEBAORD/SYS_DATA/WB_002BG.JPG
Drawn content fi le for internal processing: /WHITEBOARD/SYS_DATA/WB_002.PNG
The same fi les as above will be saved internally in case of the built-in memory.
003 / 003
Built-in Memory