Operating Instructions

45
Using Miracast(TM)
The function allows the image shown on the smartphone or tablet device to be sent and displayed on the display.
1
Select the Miracast(TM) input.
The display switches to the [Miracast(TM)] screen and the standby screen will be displayed.
2
Start the Miracast application on the Miracast-compatible device or computer
Connect the device of the name shown on the display.
The name of the Miracast application and how to start it may differ depending on the device model.
For how to use the Miracast application, see the instruction manual of your device.
3
Select “OK” in the connected device authentication screen
The image on the connected device will be displayed.
Notes:
This function can be used with Miracast-compatible Android devices and WiDi compatible computers.•
The Miracast function will be disabled if “Wireless LAN” of “Network Settings” is set to “Off”.•
If [Display Name] includes a space, the characters after the space may not be displayed on some device models.•
If you have any problem in Miracast connection, see “When using Miracast” on page 82.•