Operating Instructions

Start
Function Scrolling bar only
Time Designation
6:15
12:30
Mode
Start Time
Finish Time
Screensaver
Time
15:00
Start
Function Scrolling bar only
Interval
12:00
3:00
Mode
Periodic Time
Operating Time
Screensaver
Time
15:00
Start
Function
Scrolling bar only
Standby after SCR Saver
6:15
Mode
Screensaver duration
Screensaver
Time
15:00
Side panel
Do not display a picture in 4:3 mode for an extended period,
as this can cause an image retention to remain on the side
panels on either side of the display eld.
To reduce the risk of such an image retention, illuminate
the side panels.
This function may be applicable to the non-picture area.
Off: Darken both ends.
Low: Make it dark gray.
Mid: Make it gray.
High: Make it light gray.
Note:
To reduce the occurrence of image retention, set the Side panel to High.
Wobbling
Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour
of image.
Note:
When this function is operating, part of the screen may appear to be missing.
side panel
4:3 Screen
Display
image
retention
62
After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become available
for selection and the Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.)
Press to select Start Time / Finish Time
(when Time Designation is selected).
Press to select Periodic Time / Operating Time
(when Interval is selected).
Press to select Screensaver duration
(when Standby after SCR Saver is selected).
Press to setup.
button: Forward
button: Back
Note: Timer function will not work unless “Time” is set.
Notes:
• Pressing ” or “ ” button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is
selected.]
• Pressing ” or “ ” button continuously changes the Time by 15
minutes.
“Screensaver duration” of the “Standby after SCR Saver” can be set from
0:00 to 23:59. When this is set to “0:00”, “ Standby after SCR Saver” will
not be activated.
Screensaver (For preventing image retention)
Setup of Screensaver Time