Operating Instructions

65
Function Button Settings
Set the functions that operates when is pressed.
Function Button Settings
Function Button 1
Function Button 2
INPUT (MEMORY VIEWER)
On
Function Button Guide
INPUT (WHITEBOARD)
Select “Function Button Settings” in “Setup” menu and
press button.
• Function Button 1, Function Button 2
The following functions are set to the FUNCTION button.
INPUT (SLOT)* - INPUT (WHITEBOARD)
Simply press to select the input.
* “INPUT (SLOT)” is displayed when an optional Terminal Board is installed.
When a Terminal Board with dual input terminals is installed, “INPUT (SLOT A)” and “INPUT (SLOT B)” are
displayed.
• Function Button Guide
The function display setting for the FUNCTION button is confi gured.
On: Press the FUNCTION button to display the function list of the button.
Off: The function list is not displayed.
ECO Mode settings / Signal / On/Off Timer Settings / MULTI PIP Settings
Scrolling bar
Activates the “Scrolling bar only” screensaver.
After 15 minutes, the display enters standby mode.
Note:
Factory settings are as follows.
FUNCTION1 button: INPUT (WHITEBOARD)
FUNCTION2 button: INPUT (MEMORY VIEWER)
The menu is displayed. (Example: ECO Mode settings)
Pressing the FUNCTION button clears the menu.
ECO Mode settings
ECO Mode
Power save
Off
Off
Off
Disable
PC Power management
Off
HDMI1 Power management
Off
HDMI2 Power management
DVI-D Power management
No signal power off
Custom
The operation starts.
Function
1:INPUT (WHITEBOARD) 2:INPUT (MEMORY VIEWER)
To exit this mode, press button.
Network Settings
“Network Settings” menu is displayed.
Note:
For the network function, refer to “Operating Instructions, Network Operations” and the instruction manual of “Wireless
Manager” in use.
Multi-Live
Switch to the Multi-Live mode when using the
“Wireless Manager”.
AV Mute
Mutes the audio and video. To exit this mode, press any
button.
MULTI PIP
Press to turn MULTI PIP On/Off.