Operating Instructions

P-NR
Mosquito NR
Block NR
Off
Off
Off
Noise reduction Advanced
Off Min
Advanced Max Mid
71
• Noise reduction
Sets the following three NR (Noise Reduction) functions together.
P-NR, Mosquito NR, Block NR
Setup for Input Signals
Press to select “Advanced”.
1
Press to select P-NR, Mosquito NR or Block NR.
Press to select “Off”, “Min”, “Mid”, “Max”.
2
P-NR: Automatically reduces unwanted picture noise.
Mosquito NR : Reduces mosquito noise around subtitles on MPEG videos.
Block NR: Reduces block noise when playing MPEG videos.
Note:
Noise reduction cannot be adjusted while a PC signal is being applied.
63.98 kHz
60.02 Hz
1280×1024/60i
H-Freq.
V-Freq.
Signal Format
63.98 kHz
60.02 Hz
1280×1024/60i
H-Freq.
V-Freq.
108.0 MHzDot Clock Freq.
Signal Format
• Input signal display
Displays the frequency and the type of the current input signal.
This display is valid only for Component / RGB / PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during DVI signal input.
Advanced NR
Sets the three NR functions separately.