Operating Instructions

Screensaver
Start
Function
Side panel
Wobbling
Peak limit
Finish Time
Start Time
Scrolling bar only
Mode
Off
6:15
12:30
High
Off
Off
PRESENT TIME 99:99
Screensaver
Start
Function
Mode
Finish Time
Start Time
Scrolling bar only
Time Designation
6:15
12:30
PRESENT TIME 15:00
Screensaver
Start
Function
Mode
Operating Time
Periodic Time
Scrolling bar only
Interval
12:00
3:00
PRESENT TIME 15:00
1/2
Signal
Screensaver
PC
Off
Standby save
Off
Power management
Off
Auto power off
Off
OSD Language English
(
UK
)
Component/RGB-in select
RGB
Input label
Power save
Setup
27
Screensaver (For preventing image retention)
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
Function selection
2
3
1
4
Press to display the Setup menu.
Press to select Screensaver.
Press to display Screensaver screen.
Press to select Function.
Press to select the desired function.
Scrolling bar only
Overlay scrolling bar
Negative image
White screen
Mode selection
Start setting
5
When the Mode is set to On, press to select Start.
Press to start Screensaver.
The menu screen will disappear and the Screensaver will be activated. To stop the
Screensaver under On, press the R button or any buttons on the main unit.
Note: When the display is turned off, the Scrensaver will be deactivated.
Press to select Mode.
Press to select each
mode items.
After selecting Time Designation or Interval, the relevant Time Setup will become available for selection and the
Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.)
Press to select Start Time / Finish Time
(When Time Designation is selected).
Press to select Periodic Time / Operating Time
(When Interval is selected).
Press to setup.
button: Forward
button: Back
Note: Timer function will not work unless “PRESENT TIME” is set.
Notes:
• Pressing “ ” or “ ” button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.
Setup of Screensaver Time
Off
Interval : Operates when Periodic Time and Operating
Time are setup and those times arrive.
Time Designation : Operates when Start Time and Finish Time
are setup and those times arrive.
On : Operates when Start is selected and the
ACTION ( ) button is pressed.
Negative image : Negative image will be displayed on the screen.
Scrolling bar only : A white bar will scroll from left to right. The image won't be displayed.
Overlay scrolling bar : The brightness of the image will be decreased and a white bar will scroll on it.
White screen : The whole screen will be white.
Note: Overlay scrolling bar is not effective during two screen display.