Operating Instructions

13
Initial selections
.......(Japanese)
.......(Russian)
Русский
.......(Chinese)
Italiano
Français
Deutsch
English(UK)
Español
ENGLISH(US)
1/2
Signal
PC
Off
Standby save
Off
Power management
Off
Auto power off
Off
OSD Language English
(
UK
)
Component/RGB-in select
RGB
Input label
Power save
Setup
Selecting the On-Screen Menu Language
Press to display the Setup menu.
Press to select the OSD Language.
Press to select your preferred language.
Selectable languages
Notes:
• Selecting is also possible by pressing the INPUT button on the unit.
• Input terminal will not be selected if the terminal board is not installed into the
SLOT.
• Select to match the signals from the source connected to the component/RGB input
terminals. (see page 35)
• In 2 screen display, the same input mode cannot be selected for the main picture
and sub picture.
Selecting the input signal
Select the input signals to be connected by installing the optional Terminal Boards.
Press to select the input signal to be played back from
the equipment which has been connected to the Plasma
Display.
Input signals will change as follows:
• TH-37PWD8EK/S
• TH-42PWD8EK/S, TH-42PHD8EK/S, TH-50PHD8EK/S
INPUT1 INPUT2 PC IN
INPUT MENU ENTER/ + /VOL - /
INPUT MENU ENTER/ + /VOL - /
TH-42PWD8
INPUT1 INPUT2 PC ININPUT3