Operating Instructions

45
TH-42PHD8EK/S TH-50PHD8EK/S
Power Source 220 - 240 V AC, 50/60 Hz
Power Consumption
Normal use 295 W 395 W
Stand-by condition Save off 0.8 W, Save on 0.6 W Save off 0.8 W, Save on 0.6 W
Power off condition 0.3 W 0.3 W
Plasma Display panel Drive method : AC type
42-inch, 16:9 aspect ratio
Drive method : AC type
50-inch, 16:9 aspect ratio
Contrast Ratio 3000:1
Screen size 920 mm (W) × 518 mm (H)
× 1,056 mm (diagonal)
1,106 mm (W) × 622 mm (H)
× 1,269 mm (diagonal)
(No.of pixels) 786,432 (1,024 (W) × 768 (H))
[3,072 × 768 dots]
1,049,088 (1,366 (W) × 768 (H))
[4,098 × 768 dots]
Operating condition
Temperature 0 °C - 40 °C
Humidity 20 % - 80 %
Applicable signals
Colour System NTSC, PAL, PAL60, SECAM, Modifi ed NTSC
Scanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 50i · 24p ·
25p · 30p · 24sF ···· SMPTE274M, 1250 (1080) / 50i
PC signals VGA, SVGA, XGA,
SXGA, UXGA ···· (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
AV VIDEO IN/OUT (BNC) 1.0 Vp-p (75-ohm or high impedance)
S VIDEO IN (MINI DIN 4PIN) Y: 1 Vp-p (75-ohm), C: 0.286 Vp-p (75-ohm)
AUDIO IN (RCA PIN JACK × 2) 0.5 Vrms (high impedance)
PC (HIGH-DENSITY Mini-D-SUB 15PIN) R,G,B/0.7 Vp-p (75-ohm)
HD, VD/1.0 - 5.0 Vp-p (high impedance)
AUDIO IN (M3 JACK) 0.5 Vrms (high impedance)
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE
SPEAKERS (6 Ω) 16W [8 W + 8 W] (10 % THD)
Accessories Supplied
Remote Control Transmitter EUR7636070R or EUR7636090R
Batteries 2 × R6 Size
Fixing bands (TMME203 or TMME187) × 2
Dimensions (W × H × D) 1,020 mm × 610 mm × 89 mm
(exclusive of protruding portion)
1,210 mm × 724 mm × 95 mm
(exclusive of protruding portion)
Mass (weight)
main unit only approx. 31.5 kg net approx. 43.0 kg net
with speakers approx. 35.5 kg approx. 47.0 kg
Notes:
• Design and specifi cations are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards listed below.
EN55022, EN55024, EN61000-3-2, EN61000-3-3.
Specifi cations