Operating Instructions - Language - English

28
Picture
Normalise
Picture Mode
Bri
g
htness
Colour
Normal
0
0
Tint
White balance
Normal
Advanced settin
g
s
On
Contrast
0
0
0
Shar
p
ness
Normalise
Normal
Select
Adjust
Return
Picture Adjustments
1
2
Press to display the Picture menu.
Select to adjust each item.
Press to select the menu to adjust.
Select the desired level by looking at the picture
behind the menu.
PICTURE
Normal Dynamic
Cinema
Normal
Dynamic
Cinema
Press the left or right button to switch between
modes.
Normal
For viewing in standard (evening
lighting) environments.
This menu selects the normal levels
of Brightness and Contrast.
Dynamic
For viewing in brighter environments.
This menu select higher than
normal levels of Brightness Contrast.
Cinema
Ideal for movies.
•
Can be selected for AV/Component.
Press the left or right button to switch between
modes.
Normal Cool Warm
“TH-50PHD3” only
Press the left or right button to
select “On”. Press the down button to
enter Advanced settings mode.
Advanced settings On
Enables fine picture adjustment at a
professional level. (see next page)
Advanced settings Off
Displays images with the selected
setting of the Picture menu.
On the remote control unit, while the “Picture” menu is displayed, if either the N button is pressed at any time or the
(Access button) is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
Normal
Advanced settings
Normalise
Black extension
W/B Hi
g
h R
W/B Hi
g
h B
0
0
0
0
W/B Low R
Gamma
2. 2
0
W/B Low B
Note:
If you would like to change the picture and colour of
the selected Picture menu to something else, adjust
using the “Picture” menu commend in the Menu.
(see next page)
Helpful Hint (
/
Normalise
Normalisation)
N
Picture
Normalise
Picture Mode
Bri
g
htness
Colour
Normal
0
0
Tint
White balance
Normal
Advanced settin
g
s
On
Contrast
0
0
0
Shar
p
ness
Normalise
Normal
Select
Adjust
Return