Operating Instructions - Language - English

33
Setup for input signals
Colour system / Panasonic Auto
Select Signal from the “Setup” menu during AV(S Video) input
signal mode. (“Signal [AV]” menu is displayed.)
Press to select the “Colour system” or “Panasonic
Auto”.
Press to select each functions.
Press (ACTION) button
If the picture image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
3D Y/C Filter
(
NTSC
)
Colour system
3:2 Pulldown
On
Auto
Off
Panasonic Auto
(
4:3
)
4 : 3
Signal
[
AV
]
Setup
Si
g
nal
Screensaver
Component/RGB-in select
RGB
OSD Lan
g
ua
g
e
En
g
lish
(
UK
)
3:2 Pulldown
Select “Signal” from the “Setup” menu during AV(S Video) or Component
input signal mode. (“Signal [AV]” menu is displayed.)
Mode
Colour system
Panasonic Auto
(4:3)
Function
Set the colour system to match the input signal. If set to “Auto”, the colour system is
determined automatically.
Set to “4 : 3” to view 4:3 images in an unchanged format when Panasonic Auto is
selected. If you would like to view 4:3 images in “Just” format, set to “Just”.
Auto PAL SECAM M.NTSC NTSC
Press to select 3:2 Pulldown.
Press to set On/Off.
Press to exit from adjust mode.
R
Press (ACTION) button
Setup
Si
g
nal
Screensaver
Component/RGB-in select
RGB
OSD Lan
g
ua
g
e
En
g
lish
(
UK
)
3D Y/C Filter
(
NTSC
)
Colour system
3:2 Pulldown
On
Auto
Off
Panasonic Auto
(
4:3
)
4 : 3
Signal
[
AV
]
Signal
[
Component
]
3:2 Pulldown
Off
Note:
When On, this setting only affects the following signal input:
• NTSC signal input during “AV(S Video)” input signal mode.
• 525i(480i) signal input during “Component” input signal mode.
When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which
are recorded at 24 frames per second.
If the picture is not stable, turn the setting to off.