Model No. TH-55LFV50W Operating Instructions FULL HD LCD Display Contents • • • • • • For more detailed instructions, refer to the Operating Instructions on the CD-ROM. English Please read these instructions before operating your set and retain them for future reference. Important Safety Notice.........................2 Safety Precautions.................................3 Accessories............................................6 Parts and Functions...............................8 Connections..........
Important Safety Notice WARNING 1. To prevent damage which may result in fire or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.) No naked flame sources, such as lighted candles, should be placed on / above the set. 2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. 3.
Safety Precautions WARNING Setup This LCD Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Panasonic Corporation.) • Remote Control Kit.................................... TY-RM50VW • Cover-frame Kit...................................... TY-CF55VW50 Always be sure to ask a qualified technician to carry out set-up.
Safety Precautions When using the LCD Display The Display is designed to operate on 220 - 240 V AC, 50/60 Hz. TAIWAN: 110V AC, 60Hz (for Taiwan only). Do not cover the ventilation holes. • Doing so may cause the Display to overheat, which can cause fire or damage to the Display. Do not stick any foreign objects into the Display. • Do not insert any metal or flammable objects into the ventilations holes or drop them onto the Display, as doing so can cause fire or electric shock.
Safety Precautions CAUTION When using the LCD Display Do not bring your hands, face or objects close to the ventilation holes of the Display. • Heated air comes out from the ventilation holes at the top of Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result. Be sure to disconnect all cables before moving the Display.
Accessories Accessories Supplied Check that you have the Accessories and items shown Operation instruction book CD-ROM (Operation instruction) Wire clampers AC Power Cord DVI cable Connector cable of remote control NOTE: • 6 The remote control is not supplied.
VESA Mounting To mount this Display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). 1. Lay a protective sheet on a table, which was wrapped around this Display when it was packaged, beneath the screen surface so as not to scratch the screen face. Protective Sheet 2. Ensure you have all accessories for mounting this Display (wall mount, ceiling mount, etc). VESA Grid 4.
Parts and Functions EXT SP(8Ω,20W[10W+10W]) Control Panel Remote control sensor Power status Indicator MUTE INPUT 9 1 10 1 2 3 MENU 4 POWER button 8 MUTE button 9 Use this button to turn this Display on or put this Display to standby. 2 Use this button to select the input source. 4 Used as [SET] button in the On-Screen-Display menu. Move the highlight bar up to adjust the selected item while OSD menu is on.
EXT SP(8Ω,20W[10W+10W]) Input/Output Terminals EXT SP(8Ω,20W[10W+10W]) 13 12 11 1 1 2 3 4 5 6 AC IN 8 MAIN POWER SWITCH 9 IR TRANSMITTER IN / OUT 10 Connect the supplied power cord to the wall outlet. 2 5 RS232C network input/output connection for the use of loop-through function. 11 LAN 12 HDMI AV IN 13 Input the HDMI source of an AV device, or the DVI-D output of a PC by using a DVI-HDMI cable.
Connections AC Cord Connection Cable Securing 1. Plug the AC cord into this Display. There are three clampers supplied to secure cables at three positions. EXT SP(8Ω,20W[10W+10W]) EXT SP(8Ω,20W[10W+10W]) 1. Attach the clamper. 2. Plug the AC cord firmly until it clicks into position. Make sure he AC cord is locked on both the left and right sides. 1 Attach the clamper To remove from the unit: hole snaps Keep pushing both side snaps Insert the clamper in a hole. 3.
Technical Specifications Display: Item Specifications Screen Size 55” LCD Active Screen Size 54.64 inches (1387.80 mm) diagonal Aspect Ratio 16:9 Number of pixels 1920 (H) × 1080 (V) Pixel Pitch 0.630 (H) × 0.630 (V) [mm], 0.0248 (H) × 0.0248 (V) [inch] Displayable Colors 10 Bit (D), 1.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.