Quick Start Guide
3
Safety Precautions
WARNING
Setup
This LCD Display is for use only with the following optional accessories. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Panasonic Corporation.)
• Remote Control Kit ................................... TY-RM50VW
• Cover-frame Kit ..................................... TY-CF55VW50
Always be sure to ask a qualied technician to carry out set-up.
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard
unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being
played with by young children, creating the potential risk of suffocation.
Do not place the Display on sloped or unstable surfaces, and ensure that the Display does not hang over
the edge of the base.
• The Display may fall off or tip over.
Do not place any objects on top of the Display.
• If water is spills onto the Display or foreign objects get inside it, a short-circuit may occur which could result in re or
electric shock. If any foreign objects get inside the Display, please consult your local Panasonic dealer.
Transport only in upright position!
• Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry.
Ventilation should not be impeded by covering the ventilation openings with items such as newspapers,
table cloths and curtains.
For sufcient ventilation;
• Leave a space of 3-15/16" (10 cm) or more at the top, bottom, left, and right to the outermost circumference of this
Display.
• Leave a space of 1-31/32” (5cm) or more at the rear.
Cautions for Wall Installation
• Wall installation should be performed by an installation professional. Installing the Display incorrectly may lead to an
accident that results in death or serious injury. Furthermore, when installing on a wall, a wall hanging bracket that
conforms to VESA standards (VESA 400 × 400) must be used.