Operating Instructions

, Y , P B , P R
OUT
P
R
P B
Y
AUDIO
OUT
R
L
VIDEO
OUT
AUDIO
OUT
R
L
11
Connections
VIDEO and COMPONENT / RGB IN connection
Video equipment connection
SLOT: Terminal board (optional
accessories) insert slot (see
page 4)
Note:
The right side slot is for terminal
board with 2-slot width. The
terminal board with 1-slot width
does not function when installed
in the right side slot.
Terminals are on the bottom
side of the Plasma Display.
AV IN (VIDEO): Composite Video Input Terminal (see below)
COMPONENT/RGB IN: Component/RGB Video Input Terminal
(see below)
AV IN (HDMI): HDMI Input Terminal (see page 12)
Connect to video equipment such as VCR or DVD player.
3D IR TRANSMITTER:
Connect the 3D IR
TRANSMITTER
(optional accessory).
SERIAL: Control the
Plasma Display
by connecting
to PC (see
page 14)
Notes:
• Change the “Component/RGB-in select” setting in the “Setup”
menu to “Component” (when Component signal connection) or
“RGB” (when RGB signal connection). (see page 48)
• Signals input to COMPONENT/RGB IN terminals correspond to
Sync on G or Sync on Y.
RCA-BNC
Adapter plug
RCA-BNC
Adapter plug
DVD Player
VCR
Computer
RGB Camcorder
Note:
Additional equipment, cables and adapter plugs
shown are not supplied with this set.
DVI-D IN: DVI-D Input Terminal
(see page 12)
PC IN: PC Input Terminal
Connect to video terminal of PC
or equipment with Y, P B (C B ) and
P R (C R ) output (see page 13).
Ex. TH-65PF30ER
LAN: Connect to a network to control the unit. (see
page 60)