Operating Instructions

Manual Tuning
■ Digital TV
Normally use Auto Tuning or Update Channel List to retune Digital TV
channels.
If tuning has not been done completely or for adjusting the direction of the
aerial, use this function.
●
All Digital TV channels are added to Channel List.
1. Select frequency and offset.
2. Press OK to search.
■ Analogue TV
Set Analogue TV channel manually after Auto Tuning.
●
Set Sound System and Colour System, and then perform this function.
Normally set Colour System to Auto.
1. Select the channel position with Numeric buttons.
2. Select the channel with Channel Up / Down.
3. Set Manual Tuning.
4. Select Store and press OK to set.
●
Use Fine Tuning to make small adjustments to the tuning of an individual
programme (affected by weather conditions, etc.).
●
If a VCR is connected only with the RF cable, select channel position 0.
- 107 -