Model No. TH-50LFC70U TH-65LFC70U TH-80LFC70U TH-50LFC70E TH-65LFC70E TH-80LFC70E Operating Instructions Network Operations FULL HD LCD Display (for business use) English Please read these instructions before operating your set and retain them for future reference.
Contents Before use • Illustrations and screens in this Operating Instructions are images for illustration purposes, and may be different from the actual ones. • Descriptive illustrations in this Operating Instructions are created mainly based on the 50 inch model.
Read this rst! FCC and IC STATEMENT This equipment has been tested and found to comply with the limits for an Other Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Read this rst! LCD Display Declaration of Conformity (DoC) “Hereby, Panasonic Corporation declares that this Display is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC.” If you want to get a copy of the original DoC of this Display, please visit the following website: http://www.doc.panasonic.
Request Regarding Security When using this product, security breaches of the type described below are conceivable. • Leakage of your private information via this product • Illegal operation of this product by a malicious third-party • Harm to or cessation of operation of this product by a malicious third-party Be sure to implement suf cient security measures. • • • • • Set passwords, and limit the users that are permitted login access. Make sure the password is as hard to guess as possible.
What you can do This unit supports wired LAN and wireless LAN enabling the network functions as below. (See page 19) The following operations are possible when using Web Browser. • Setting and adjusting the Display • Displaying the Display status (See page 34) Compatible with PJLink Class 1. The following operations can be performed from a computer when PJLink protocol is used.
Notes on Using Wireless Connection Wireless connection function of the Display uses radio waves in the 2.4 GHz and 5 GHz bands. A radio station license is not required, but be sure to read and fully understand the following items before use. Do not use near other wireless equipment. The following equipment may use radio waves in the same band as the Display.
Notes on Using Wired LAN Use straight or crossover LAN cable that is compatible with category 5 or above. ¼ Whether straight cable, crossover cable or both can be used varies depending on the system configuration. For details, consult your system administrator. When setting up the Display at a place, where electric statistic occurs often, take a sufficient anti-static measure before start using.
Check your computer Necessary environment for computers to be connected • First, check your computer to see whether or not it has a wired LAN or a built-in wireless LAN function. • Before connecting the Display to the computer, be sure to check the following settings. • Operation is not guaranteed for all wireless LAN adapters and built-in wireless LAN adapters. Wired LAN Check 1 • • For LAN cable Is the cable properly connected? Use LAN cable that is compatible with category 5 or above.
Connection Example of Network Connection (Wired LAN) COMPUTER Display (main unit, rear) LAN cable (not supplied) LAN cable (commercial) Hub or broadband router • Make sure the broadband router or hub supports 100BASE-TX. • Use a LAN cable between the twisted pair cable transmitter and the device that conforms to the following conditions.
Connection Example of Network Connection (DIGITAL LINK) A twisted pair cable transmitter such as the Panasonic Digital Interface Box (ET-YFB100G) uses twisted pair cables to transmit inputted video and audio signals, and these digital signals can be input to the Display via the DIGITAL LINK terminal.
Network Settings Make the various settings to use the network function. For network settings, contact your network administrator. Displaying the Network Settings menu 1 to display [Setup] menu.
Network Settings Wired LAN You can make detailed wired LAN settings. 1 Select [Wired LAN] in [Network Settings] menu and press Wired LAN 1 Save button. IP address Off DHCP IP address 192.168. 10.100 Subnet mask 255.255.255. 0 Gateway Select the item and press button. 000.192.168.010 192.168. 0. 1 1 2 3 All delete 4 5 6 Delete 7 8 9 0 . Ok Cancel 2 Delete the current numbers. ([Delete] or [All delete]) Enter numbers and dots using numeric keypad on the screen.
Network Settings Wireless LAN You can make detailed wireless LAN settings. (You cannot select AD HOC mode with this display.) Setting network number 1 2 Select [Wireless LAN] in [Network Settings] menu and press Select the number to be connected for [Wireless LAN]. • [Off], [S-DIRECT], [M-DIRECT], [USER1]-[USER3] button. Wireless LAN Save Wireless LAN Off • Selecting [Off] disables the wireless LAN.
Network Settings 3 Select [Save] and press button. Save the current network settings. Default settings of [M-DIRECT] The following settings as [M-DIRECT] in the [Wireless LAN] are set before the Display leaves the factory. IP address Subnet mask SSID Channel Key 192.168.12.100 255.255.255.
Network Settings 3 Press to go to the next item. Make the settings related to the wireless connection between the Display and the network. SSID Authentication Open Encryption None SSID : Enter the SSID registered at the access point. Entering characters page 18 • SSID has to be entered in alphanumeric letters. • You cannot set “any” or “ANY” for SSID. Authentication : Set the user authentication method used by the network to be connected.
Network Settings 4 Press to go to the next item. In addition, further perform the following setting depending on [Authentication] and [Encryption] settings. Default Key Key 1 1 ******* Key 2 ******* Key 3 ******* Key 4 ******* method: Default Key Key1 – 4 : Set 1 – 4 numerals for the default key. : Set a WEP key to the key number selected with [Default Key]. Either the 64-bit or 128-bit WEP key can be set.
Network Settings Name Change You can change the Display name to be displayed on the network. 1 Select [Name Change] in [Network Settings] menu and press button. The keyboard is displayed. Up to 8 characters can be entered for the Display name. Name Change Name0000 A B C N O P a b c n o p 0 1 2 ! ” # _ ` | D Q d q 3 $ ~ E R e r 4 % < Ok F S f s 5 & > G T g t 6 ’ ( H U h u 7 ) I V i v 8 + [ J W j w 9 – ] K X k x L M Y Z l m y z Space / = ? { } , Cancel All delete Delete @ .
Network Settings Control I/F Select Select whether to control via RS-232C of the Display's SERIAL terminal or with the DIGITAL LINK/LAN terminal. If “DIGITAL LINK/LAN” is selected, the power indicator lights orange when the power is turned off with the remote control (standby). RS-232C: Controls via RS-232C using the Display's SERIAL terminal.
Network Settings Network Status Displays the current network status. Select [Network Status] in [Network Settings] menu and press button. The Display information, settings of wired LAN and wireless LAN are displayed. Password Set to [On] to perform password check when connecting with the Display using “Wireless Manager”. By controlling connection with password setting, it is possible to prevent an external device from accidentally connecting and interrupting images, etc.
Network Settings Live mode Cut In Set this [ON] to allow interrupt of the Live mode by other users while the Live mode is active (sending image) by the “Wireless Manager”. For details, refer to “Wireless Manager” operating manual. 1 2 Select [Live mode Cut In] in [Network Settings] menu and press button. Select [On] or [Off]. DIGITAL LINK status Display the DIGITAL LINK connection environment. DIGITAL LINK status Select “DIGITAL LINK status” in [Network Settings] menu, and press .
Network Settings DIGITAL LINK mode You can switch the setting of DIGITAL LINK/LAN terminal. LAN: Enables LAN communication via the Display's LAN terminal. Auto (LAN): Enables automatic selection between LAN communication via the Display's LAN terminal and HDMI/ LAN communication via the twisted pair cable transmitter. DIGITAL LINK (LAN): Enables HDMI/LAN communication via the twisted pair cable transmitter. DIGITAL LINK (RS-232C): Enables HDMI/RS-232C communication via the twisted pair cable transmitter.
Connecting with Wired LAN To use the network function, make the necessary settings in [Network Settings] and be sure to set LAN to enabled in [Control I/F Select] and [DIGITAL LINK mode]. (See page 20) Computer operation Connection can be made with wired LAN. However, con rm to your system administrator on network settings before changing any settings. 1 Turn on the computer. 2 Make the network setting according to your system administrator.
Using Web Browser Accessing from the Web browser 1 2 3 Activate the Web browser in the personal computer. Enter the IP address set by the Display into the URL input eld of the Web browser. Enter your “User name” and “Password”. The factory default settings are user1 (user privileges) or admin1 (administrator privileges) for the user name and panasonic for the password. 4 Click [OK] to display the Display status page. TH-50LFC70 “Display status” page is displayed.
Using Web Browser Description of each item 1 TH-50LFC70 2 3 4 5 6 Page tab Click these to switch pages. 2 Status Click this item, and the status of the Display is displayed. 3 Display control Click this item to display the Display control page. 1 Detailed set up Click this item to display the advanced settings page. 5 Change password 6 Click this item to display the Crestron Connected™ operation page.
Using Web Browser Network status page Click [Status], then [Network status] to display the Status information page. Displays the current con guration information of the network. 1 2 26 1 Displays the con guration details of wireless LAN. 2 Displays the con guration details of wired LAN.
Using Web Browser Basic control page To move from another page, click [Display control], then [Basic control]. 1 2 3 4 1 2 Power On/Off control Use these to select the input signals 3 4 Operation of AV mute Switches aspect mode The following points will be different when connected wirelessly. • Switching to Miracast™ and MEMORY VIEWER input will not be possible. • Control will not be possible with Crestron Connected™.
Using Web Browser Change Password page Click [Change password].
Using Web Browser Network con g page You can make detail network settings on Display, when connecting without the administrator authority or when connecting with Wireless LAN. LAN settings 1 Click [Detailed set up] in the menu. 2 Select the items to change and click [Next]. 3 Complete the detailed settings and click [Next]. The settings window appears, showing the current settings. • To change the LAN settings, click [Change]. • To return to the previous window, click [Back].
Using Web Browser 4 Click [Submit]. The settings will be registered. (Wireless LAN screen) Making the above settings effective (Only for wireless LAN) Select [Wireless LAN] in [Network Settings] menu of the Display, and select the network set in this page. • Important video/audio data is protected because AES encryption processing takes place. • Changing the setting of LAN while connected with LAN might disconnect the connection.
Using Web Browser Ping test page This page makes it possible to check whether the network is connected to the DNS server, etc. Click [Detailed set up], then [Ping test] to display the Ping test page. Display which appears when the connection was successful. 1 2 Display which appears when the connection failed. 1 2 Enter the IP address of the server to be tested. Button for conducting the test. Command port set up page Set the port number to be used with command control.
Using Web Browser Control Crestron Connected™ page You can monitor or control the Display using Crestron Connected™. When you click [Crestron Connected™], the Crestron Connected™ operation page is displayed. If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this page does not appear. In this case, return to the previous page by clicking [Back] in the operation page.
Using Web Browser Control Info page Click Info on the operation page. 1 Panasonic LCD Display 4 1 2 Name1234 5 2 3 3 4 6 5 6 Display Name Displays the name of the Display. Mac Address Displays the MAC address. Resolution Displays the resolution of the Display. Power Status Displays the status of the power. Source Displays the selected video input. Exit Return the operation page. Help page Click Help on the operation page. The Help Desk screen is displayed.
PJLink™ Protocol The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your computer using PJLink™ protocol. • Display setup • Display status query Supported commands Commands to control the unit with PJLink™ protocol are shown in the table below.
Trademarks • VGA is a trademark of International Business Machines Corporation. • Microsoft®, Windows®, Windows Vista®, and Internet Explorer ® are the registered trademarks or trademarks of • • • • • • • • Microsoft Corporation in the United States and/or other countries. Macintosh, Mac, Mac OS, OS X and Safari are the trademarks of Apple Inc. registered in the United States and other countries. SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association.
