Operating Instructions

2. Bring the electronic pen to within 2 m from the electronic pen adapter (remove any obstacle

between them)

•

Registration will be completed in a second. When registration is completed, the function indicator lights green

for about one second and the power indicator (which was off) lights green.

• If a registration error has occurred, the function indicator lights red for about one second. Turn off the

electronic pen and perform registration again.

Notes

• See “Registering the Electronic Pen” and “Unregistering All Electronic Pens” in “Software Help” for

instructions on unregistering the electronic pen or registering and unregistering the second and

subsequent electronic pens. For details on accessing the help information, see “Viewing the Help of the

Software” (see page 15).

• If you turn on the electronic pen before registering it to the electronic pen adapter, the function indicator

blinks green and red alternately. Turn the power off and register the electronic pen.

Connecting the electronic pen adapter starts up the elite Panaboard software automatically.

The icon is displayed in the notification area, and you can use the elite Panaboard software.

• To display the Select Function Menu, click the

Menu Start Tab (left side: / right side: ) on

the screen.

• To display the Drawing Menu, touch the screen

while holding the menu button on the electronic

pen.

Notes

• You can also start up elite Panaboard software in either of the following procedures.

a. From the Start menu of Windows, point to [All Programs] → [Panasonic] → [elite Panaboard] and click

[elite Panaboard software].

b. Click the desktop icon of to start up.

• When the elite Panaboard software is not installed, the icon is not displayed in the notification area. The

Menu Start Tab and Drawing Menu of the electronic pen are not displayed on the screen.

• For detailed information about using the elite Panaboard software, refer to the help menu. For details on

accessing the help information, see “Viewing the Help of the Software” (see page 15).

Exiting the elite Panaboard software

Click on the icon in the notification area, and select [Exit] from the menu.

4. Starting the elite Panaboard software

Example of the Select Function Menu

Example of the Drawing Menu