Digital Personal Video Recorder TU-CTH100 User Manual TQB8E4072 PUK Visit Issue 08/10/04
TU-CTH100 Welcome We hope you have many years of enjoyment from your new Panasonic Personal Digital Video Recorder (PVR). These simple, easy to follow instructions will enable you to quickly set up and install the equipment and begin your enjoyment of the available services. The availability of Digital services in your area is dependent on the transmissions received by your aerial and the configuration of your existing equipment.
TU-CTH100 Warnings and Precautions This Personal Digital Video Recorder (PVR) is intended for the reception of Digital TV picture and sound signals. If the PVR is exposed to drastic temperature changes, e.g. taking it from a cold room to a warm room, connect it to the mains supply and let it stand for at least two hours. Do not expose the PVR to any moisture. The PVR is designed for use indoors and should be protected against moisture (splashes of water etc.).
TU-CTH100 Accessories Please confirm you have the following items Item Part Number Mains Lead TSXA143 Operating Instruction Book TQB8E4072 Remote control EURT7636030 2 x Batteries UM-3DJ-2P SCART Lead X1 PANA-003-06 Inserting Remote Control Batteries Remove battery cover Insert batteries Noting correct polarity Replace battery cover Notes Make sure that batteries are fitted the correct way around. Do not mix old and new batteries. Remove old/exhausted batteries immediately.
TU-CTH100 Connection of Digital Personal Video Recorder to other Equipment Socket Description AV1(TV) Video/RGB/S-Video Output to TV AV2(EXT) Video/RGB Output to External Recording Device RF IN RF Signal Input from Terrestrial Aerial The connection diagram shown is a suggestion only. Only leads shown in the Accessories List (see page 4) are included with this PVR for connections. All other equipment and leads are not supplied.
TU-CTH100 Remote Control TV/PVR PVR – Remote control operates PVR unit TV – Remote control operates TV Please see note at bottom of page Standby On/Off Switches the PVR On or Off standby TV GUIDE Press to access the TV Guide Direct Navigator Press to access the disk management facilities Source Press to switch the input being viewed (see page 10) Cursor keys and OK key Use the cursor keys to navigate menus and the OK key to select options EXIT Press to exit menus Colour keys Used for navigation in menus an
TU-CTH100 Front Panel Keys Standby On/Off Button Press to switch box on from standby and off to standby Channel Up/Down Buttons Use to Change the channel being viewed Play Button Press to begin playback of last viewed recording or to stop rewind/fast forward mode Stop Button Press to stop playback or recording Record Button Press once to begin recording and multiple times to set recording period in multiples of 30 minutes Rewind Button Press to rewind a recording playback.
TU-CTH100 Start Up Connect your PVR as shown on the previous page and switch on using either the Standby On/Off key on the remote control or the Power Button on the front of the PVR. The Panasonic start up screen will be displayed and then the Auto setup feature will begin, your stations will be located, sorted into order and stored ready for use. During Auto Setup the front display will show AUTO SETUP. When Auto Set Up has finished, the front display will show the name of first channel stored.