Operating instructions

TU-CTH100
25
Programme Edit Screen - Divide
This feature allows the user to divide a recording into two seperate recordings.
Once a recording has been divided into two separate recordings they cannot be recombined.
Navigate to the point in the recording where you wish to divide it and pause
playback.
Press the OK key to set the divide point.
The divide point will be transferred to the right hand window along with the
counter time reading.
To cancel this divide point and set a different point press the Green key.
To divide the recording at this point press the Red key.
A warning message will appear.
The user is informed that once a recording has been divided into two separate
recordings, it can not be recombined.
To divide the recording press the OK key.
To abort this action, press the EXIT key.
Once a recording has been divided, the two separate recordings will appear in the
Direct Navigator Screen.
The second recording has the same title but with (2) next to it.
To exit the Programme Edit – Divide screen press the EXIT key.
While the Recording is being divided, ‘Please wait’ will appear on screen.
Dependent upon the recording, the Divide Process may take several minutes to
complete.

Summary of content (8 pages)