5.2˝ Diagonal LCD TV PICTURE SOUND SET UP TV/AV TV/TEXT F.P. INDEX HOLD 1 2 3 4 5 6 7 8 9 SURROUND ASPECT 0 Operating Instructions Model No. TX-15LT2M TX-15LT2Q TX-15LT2Z TX-15LT2X Please read these instructions before operating your set and retain them for future reference.
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new 15.2 ″ Diagonal LCD TV. To obtain maximum benefit from your set, please read these instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. Table of Contents Warnings and Precautions .........
Warnings and Precautions • This TV set is designed to operate on DC 15V. • To prevent damage which might result in electric shock or fire, do not expose this TV set to rain or excessive moisture. This TV must not be exposed to dripping or splashing water, and objects filled with liquid, such as vases, must not be placed on top of or above the TV. • WARNING : HIGH VOLTAGE!!! Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside.
Before Operating This Set Supplied Accessories Check the accessories before installations. • Operating Instruction book • Remote Control Transmitter • AC Adaptor PICTURE SOUND SET UP TV/AV TV/TEXT F.P. INDEX HOLD 1 2 3 4 5 6 7 8 9 SURROUND ASPECT VCR 0 • Mains Lead TX-15LT2Q/Z TX-15LT2M • AC Plug Adaptor TX-15LT2X • Batteries for the Remote TX-15LT2X only Control Transmitter (2 × R6 (AA) size) Battery Installation 1 Open the cover.
Quick start Guide 1. Choose Your Connection Type LCD TV 1. Connecting the TV directly to an aerial only Connect the Aerial lead into the TV Aerial Input socket ( ). Aerial (Not Supplied) Aerial Input socket Aerial socket Aerial Lead or 2. Connection of TV and VCR using Scart and RF cables LCD TV RF connection Connect the AERIAL lead to the Aerial input socket of the VCR and connect the RF cable from the VCR Aerial Output socket to the TV Aerial Input socket ( ).
Quick start Guide 2. Connecting the AC Adaptor 1 Connect the mains lead to the AC Adaptor. 2 Connect the AC Adaptor DC plug to the DC IN socket. 3 3 Plug into household mains socket. 1 2 • Be sure to use the power cord and AC adaptor included in the accessories. • Do not use the AC adaptor for other than the specified equipment. • Unplug the AC adaptor if it is not used for long time. • Do not place any objects on the AC adaptor. • Do not use the AC adaptor outdoors.
Connections How to connect the input terminals Connects VCRs and other peripheral equipment Connection example: AV2 connection Connection example: AV1 connection AV1 Scart socket Scart cable S VIDEO cable VIDEO cable AUDIO cable Input / Output from AV1 Scart socket. Connect the S VIDEO or VIDEO Terminal. S Video OUT Video OUT R Audio OUT (Super-VHS VCR) Scart socket. L When connecting 21 pin Scart cables.
Connections How to connect the AUDIO OUT terminals AUDIO IN L R 3.5 mm stereo plug to stereo phono lead Amplifier to speaker system Notes: • The AUDIO OUT terminal provides a fixed level output only. (The menu settings and remote control volume controls have no effect.) • Additional equipment and cables shown are not supplied with this set. Connecting Headphones / Earphones Connect headphones / earphones as follows. (3.
Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control as shown below to access and adjust features as desired. Press to move the cursor up and down on the menu. Press to access menus, adjust levels or to select from a range of options. STR Press to store settings after adjustments have been made or options have been set. TV/AV Press to exit the menu system and return to the normal viewing screen.
Basic controls Side panel controls and Remote control ASPECT Control (see page 20) Sound Mute TV/AVmode Selection Press to select TV, AV input signal modes sequentially. Function selection (see on this page below) Volume Up (+), Down (-)/ Programme Number Up ( ), Down ( ) Volume adjustment which uses these buttons is performed after pressing Function button. When programme number up ( )/down ( ) buttons on the side panel of the main part are pressed in stand-by mode, TV turns on.
Basic controls Power (Stand-by) The TV set must first be plugged into the wall outlet and turned on at the TV ON / Stand-by button on the side panel. Press this button to turn the TV set On from Standby mode, press it again to turn the TV set OFF to Standby mode. Note: • It is also possible to turn the TV set on from STANDBY mode by pressing the “Direct Programme Number Selection” Buttons (0-9) and the “Programme Number Up or Down” Button, either on the side panel or on the Remote Control.
SETUP MENU The setup menu provides access to various advanced features and also to the Tuning menu. SETUP MENU SET UP 1 Press to display the setup menu screen. 2 TELETEXT OFF TIMER CH COLOUR SET VCR/GAME TEXT SELECT CHILD LOCK TUNING MENU Press to select the menu to adjust. Press to adjust the desired setting. FASTEXT OFF OFF ENGLISH OFF ACCESS TV/AV Press TELETEXT at any time to go back to watching TV. Allows you to choose 2 modes.
TUNING MENU Channel Selection Select the most easily viewed channel selection method.
TUNING MENU 1 PICTURE SOUND 2 SETUP MENU Press to display the SETUP MENU. TELETEXT OFF TIMER CH COLOUR SET VCR/GAME TEXT SELECT CHILD LOCK TUNING MENU Press to select the TUNING MENU. SET UP PICTURE Press to access the TUNING MENU screen. FASTEXT OFF OFF ENGLISH OFF ACCESS SOUND 3 TUNING MENU Press to select the menu to adjust. SET UP CH SELECT SYS SELECT AUTO TUNE MANUAL TUNE SOUND SYS COLOUR SYS FINE TUNE SKIP Press to adjust option or access chosen menu.
TUNING MENU AUTO TUNE Before AUTO TUNE, set the “CH SELECT” and “SYS SELECT”. Follow the step on the previous page to display the TUNING MENU screen. 1 Press to select AUTO TUNE. TUNING MENU Press to access AUTO TUNE. Notes: • If you proceed with the next step all tuning data will be erased (all stations and their programme positions stored in your TV's memory will be wiped out so that the new settings can be stored).
TUNING MENU MANUAL TUNE Before MANUAL TUNE, set the “CH SELECT” and “SYS SELECT”. Follow the step on page12 to display the TUNING MENU screen. 1 Press to select MANUAL TUNE. PICTURE SOUND TUNING MENU Press to access MANUAL TUNE. SET UP 2 Press to select the desired Programme Number. DIRECT ASIA/M. EAST CH SELECT SYS SELECT AUTO TUNE MANUAL TUNE SOUND SYS COLOUR SYS FINE TUNE SKIP ACCESS 5.5MHz AUTO OFF Press to search the higher or lower channel.
PICTURE 1 PICTURE Press to display the PICTURE screen. 2 Press to select the menu to adjust. Adjust the desired level by looking at the picture behind the menu. TV/AV 3 MENU Press to exit from the PICTURE screen. This returns the set to the normal viewing condition. MENU mode will be memorized for each TV, AV1 and AV2 mode. DYNAMIC STANDARD CINEMA MENU Function DYNAMIC Displays a bright screen with maximum contrast. STANDARD CINEMA DYNAMIC STANDARD ON ON Displays standard image.
PICTURE COMB FILTER PICTURE Reduces colour noise. Not displayed during RGB Video input and S Video input mode. ON AI (Artificial Intelligence) OFF Automatically analyses the incoming picture and processes it to give improved contrast and optimum depth of field. ON Helpful Hint ( OFF MENU BACKLIGHT CONTRAST BRIGHTNESS COLOUR SHARPNESS C.TEMP COMB FILTER AI DYNAMIC STANDARD ON ON PICTURE MENU BACKLIGHT CONTRAST BRIGHTNESS COLOUR SHARPNESS C.
SOUND VOLUME, BASS, TREBLE, BALANCE, HEADPHONE VOL. Effect Item SOUND Function VOLUME Less More Adjusts output volume. BASS Less More Adjusts lower deeper sounds. TREBLE Less More Adjusts higher sharper sounds. BALANCE Left SP Right SP HEADPHONE VOL. Less More SURROUND MENU VOLUME BASS TREBLE BALANCE HEADPHONE VOL. SURROUND STANDARD OFF Adjusts the sound level difference between left and right speakers. Adjusts Headphone volume. To enjoy a concert hall effect, turn SURROUND to on.
ASPECT Controls Press the ASPECT to move through the four aspect options: JUST, 4:3, ZOOM and 16:9. Notes: • The screen modes (JUST/4:3/ZOOM/16:9) are selectable manually (wide-aspect modes are not automatically selected if a wide-screen signal is applied). • During Aspect change, the displayed picture will momentarily disappear. This is not a malfunction.
Advanced Remote Control Operation TELETEXT · Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is transmitting Teletext. · Pressing the Picture button whilst in Teletext operation will display the contrast PICTURE function with a cyan bar, press SOUND SET UP TV/AV TV/TEXT F.P. or to alter the setting as required. · Pressing the Setup button whilst in Teletext operation will display special function options at the bottom of the screen.
Advanced Remote Control Operation It is not possible to change the programme position when in News flash, Update or Sub Coded Page Access operation. 1 2 3 4 5 6 7 8 9 Red Green Yellow Blue STR List Store In List mode the four page numbers can be altered (programme positions 1 - 25 only). To do this, press one of the four coloured buttons and enter the new page number. STR Press and hold , the page number will change to white indicating that the page is stored.
Advanced Remote Control Operation Sub Coded Page Access When Teletext information exceeds more than one page, it may take some time for the automatic changing of the sub pages to reach the sub page you require. It is possible to enter your required sub page and continue watching the normal programme until the correct sub page is found. Select the required page number using buttons 0 - 9.
Advanced Remote Control Operation Manufacturer setting Remote Control Operation is possible for the VCR’s and DVD’s of the various manufacturers. After completion of setting, execute the various operations after pressing the VCR/DVD selection switch. 1 Press to select VCR or DVD. PICTURE SOUND SET UP 2 TV/AV TV/TEXT F.P. INDEX HOLD While pressing the VCR / DVD Power button, press the manufacturer code (enter the two digit code), and press the VCR / DVD Stop button.
Channel Allocation SYS SELECT CH DISPLAY CHINA HK/UK 0 1 2 3 4 5 6 7 – 1 2 – – – – – – – – – – – – – – – – – – 21 11 12 13 14 15 16 12 13 19 20 21 22 23 24 ASIA/M.EAST NZ/INDONES AUSTRALIA E.
Troubleshooting If there is a problem with your LCD TV please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV).
Specifications Scart and S Video socket information AV1 Scart socket Socket Earth 21 CVBS out (video) 19 CVBS earth 17 Red in 15 Red earth 13 Green in 11 Green earth 9 Blue in 7 Blue earth 5 Audio out (L) 3 Audio out (R) 1 AV2 S Video 4 pin socket 20 CVBS in (video) 18 RGB status earth 16 Status RGB 14 Earth 12 - 10 - 8 Status CVBS 6 Audio in (L) 4 Audio earth 2 Audio in (R) Chrominance in Luminance in Chrominance earth Luminance earth Suitable inputs for AV1 include RGB (Red / Green / Blue).
Customer’ Record The model number and serial number of this product can be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes. Model Number Serial Number Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic.co.