User Manual

16
TUNING MENU
MANUAL TUNE
Before MANUAL TUNE, set the “CH SELECT” and “SYS SELECT”.
Follow the step on page12 to display the TUNING MENU screen.
MANUAL TUNE (via side panel)
It is also possible to use the control panel buttons on the side of the TV to tune individual programme positions
CH 2
5.5 MHz
2
MANUAL TUNE (SIDE PANEL)
—/ + : SEARCH
TV/AV : MOVE CURSOR
STR : TO STORE
F : TO EXIT
1 Press (Side panel) until Tuning mode is reached.
2 Press or to access Tuning mode.
3 Press to move between Change programme, Search and Change
TV system.
4 Press or to change programme position or start search.
When the desired station is found, press to store.
The programme position will flash.
Repeat above procedure to tune additional programme positions.
Press at any time to exit the Tuning menu.
1. If a clear picture cannot be obtained even when a Broadcast or AV signal is received, refer to the “Colour System Selection”
operation on page 14.
2. After the Manual tune is finished, press the Programme Number “Up” Button to confirm the tuning condition for each
Programme Numbers. If some Programme Numbers are unused, it is possible to skip such Programme Numbers.
3. When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as indicated
in the instruction manual of VCR and to set the designated channel to programme No.“0”. In that case, perform manual tune
after setting the colour system and sound system in advance. Further, in multi-system VCR, it is more convenient to set the
designated channel to several programme Numbers.
Helpful Hint
EXIT
RETURN
TV/AV
SEARCH – /+
PROGRAMME – /+
BUTTON
STORE
’STR’
MANUAL TUNE
CH 2
2
SYS SELECT
SOUND SYS
COLOUR SYS
5.5MHz
SKIP
OFF
AUTO
ASIA/M. EAST
CH SELECT
DIRECT
FINE TUNE
TUNING MENU
AUTO TUNE
ACCESS
MANUAL TUNE
1 Press to select MANUAL TUNE.
Press to access MANUAL TUNE.
2 Press to select the desired Programme Number.
Press to search the higher or lower channel.
3 When the desired station is found, press to store.
The programme position will flash.
Press at any time to go back to watching TV.
TV/AV
PICTURE
SOUND
SET UP
TV/AV
STR
HELP