Datasheet

50
No stations found
Please insert the aerial
•
No analogue signal can be found in Auto Setup.
Tuner Locked
Please stop recording to operate
•
If you want to unlock, cancel Direct TV Recording (p. 38) or Timer
Programming (p. 36).
Timer overlap !
•
The timer programme events are overlapped. Cannot record other
channel at the same time. Check the Starting and Ending times in
Timer Programming (p. 37).
Timer incorrect !
•
Set Starting and Ending times in Timer Programming correctly
(p. 37).
Timer Event Due to Start
1: BBC1 has been
Programmed for recording at 20:00
•
This message will appear 2 minutes before timer programming
event due to start.
Software successfully updated
Press EXIT to continue
•
The software updating is finished.
Software Update failed. Please try again later.
Press EXIT to continue
•
Perform “System Update Search Now” in System Update (p. 27).
If it is still failed, there may not be the new software.
Shipping condition completed.
TV can now be switched off.
•
“Auto Setup” will automatically start when Mains power On / Off
switch is next turned On. (p. 10)
Please check settings and connections on
HDMI devices.
•
Communication error in VIERA Link function (p. 40).
This service is locked!
Press OK to enter PIN
•
The selected channel is locked in Child Lock (p. 29).
Timer already expired !
•
Starting time in Timer Programming is already past. Set correctly
(p. 37).
Recording in progress
•
The recording equipment is recording the programme signal from
its own tuner. You can turn the TV off and leave the equipment
recording in the normal way.
Please wait.
•
A function is in progress.
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
•
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
Unable to download, Check Equipment
•
The tape or disc is active. Stop the equipment and try again.
PIN incorrect !
•
The PIN number you entered is wrong.
Message Meaning / Action
On screen messages