Model No. TX-L32E5E TX-L37E5E TX-L42E5E TX-L47E5E Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance.
Notice for DVB / Data broadcasting / IPTV functions This TV is designed to meet the standards (as of August, 2011) of DVB-T (MPEG2 and MPEG4-AVC(H.264)) digital terrestrial services and DVB-C (MPEG2 and MPEG4-AVC(H.264)) digital cable services. Consult your local dealer for availability of DVB-T services in your area. Consult your cable service provider for availability of DVB-C services with this TV. This TV may not work correctly with the signal which does not meet the standards of DVB-T or DVB-C.
Transport only in upright position Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/ or performance from usage of such other maker’s peripheral devices.
Safety Precautions Warning Safety Precautions Handling the mains plug and lead Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.) Ensure that the mains plug is easily accessible. Do not touch the mains plug with a wet hand. This may cause electrical shock. Do not use any mains lead other than that provided with this TV. This may cause fire or electrical shock.
Radio waves Caution When cleaning the TV, remove the mains plug Cleaning an energised TV may cause electric shock. Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time This TV will still consume some power even in the Off mode, as long as the mains plug is still connected. Do not expose your ears to excessive volume from the headphones Irreversible damage can be caused.
Accessories / Options Standard accessories Remote Control N2QAYB000753 Batteries for the Remote Control (2) R6 (p. 7) Pedestal (p. 7) Mains lead (p. 11) Quick Start Guide Clamper (p. 13) Accessories / Options Terminal adaptors (p. 12) Operating Instructions (p.
Wireless LAN Adaptor and exclusive stand [_ [J ? * ! & _ @ $ !$ $ % % !$ < ! "" $ ? * ! & _ >! * * ] $ ! $ %& < ! " &X?$ ! $ ? %# ! > !$ X $ @ = * > # X " * ! ? * * >! & _ ! @ "! > $ * ! * ? <} \ $ { \ !'$ & >* $ ? !$' * ! & _ < $ !$' $ * @ *! ! $ & # " # $ % !& %& < ! ! $ & !$X "
Assembly screw (4) Bracket _{ ` _{ ` { _{ ` { { ^[_` { ^[_`| { ^[_} { @ ^[_}| { Assembly screw (4) Base _{^ ^[_` { _{^ | ^[_`| { _{^ | ^[_} { _{^} ^[_}| { } { Quick Start Guide 1 Assembling the pedestal * "% > X $ * % = * % ? < = ? * * > ? !'* $ < Z !$' * "% > * > $' > # >!&& ! * * < 2 Secur
Identifying Controls Remote Control 8 OK OFF TIMER 16 17 18 19 9 20 10 21 9 22 10 11 12 23 24 11 12 13 13 14 14 25 15 26 15 16 17 27 18 19 20 21 22 1 Standby On / Off switch 2 3 4 5 6 7 Switches TV on or off standby. OFF TIMER (p. 21) Turn the TV to Standby mode automatically after a fixed period [Main Menu] (p. 31) Press to access Picture, Sound, Timer and Setup Menus. Aspect (p. 22) Changes aspect ratio. Information (p. 20) Displays channel and programme information.
Indicator / Control panel 1 Function select Quick Start Guide Identifying Controls [Volume] / [Contrast] / [Brightness] / [Colour] / [Sharpness] / [Tint] (NTSC signal) / [Bass] / [Treble] / [Balance] / [Auto Setup] (p. 40 - 41) [Music] or [Speech] mode in the Sound Menu 2 Channel Up / Down, Value change (when using the F button), Switching the TV on (press either button for about 1 second when in Standby mode) 3 Changes the input mode 4 Mains power On / Off switch Use to switch the mains power.
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. Terminals Quick Start Guide 2 1 5V 500mA MAX 3 5V 500mA MAX Basic Connection 4 6 1 2 3 4 5 6 7 8 9 10 5 11 CI slot (p. 50) SD Card slot (p. 55) USB 1 - 2 port (p. 55, 81) HDMI1 - 4 (p. 12, 81) Headphone jack (p. 82) ETHERNET (p.
AV devices Player TV Player HDMI cable Quick Start Guide DVD Recorder / VCR TV Terrestrial aerial DVD Recorder / VCR Basic Connection AV1 (SCART) adaptor Cable SCART cable RF cable RF cable DVD Recorder / VCR and Set top box TV Set top box HDMI cable TV Terrestrial aerial AV1 (SCART) adaptor SCART cable RF Cable SCART cable RF cable DVD Recorder / VCR Supplied with this TV Note Connect to the TV’s AV1 for a DVD Recorder / VCR supporting Q-Link (p. 75).
Network To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network environment. If you do not have any broadband network services, please consult your retailer for assistance. Prepare the internet environment for wired connection or wireless connection. Setup of the network connection will start after the tuning (when first using the TV). (p.
Auto Setup Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer. Please complete connections (p. 11 - 13) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment. Quick Start Guide 1 Plug the TV into mains socket and switch on 2 Select the language Auto Setup 3 Takes a few seconds to be displayed.
5 1 [DVB-C Network Settings] Depending on the country you select, select your cable provider beforehand by following the on-screen instructions. select [Start Auto Setup] DVB-C Network Settings Frequency Network ID Auto Auto Start Auto Setup access Normally set [Frequency] and [Network ID] to [Auto]. If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable provider with numeric buttons.
6 [Wireless] Access points found automatically are listed. 1. Select your desired access point select Available Wireless Networks No. 1 2 3 Network Name(SSID) Access Point A Access Point B Access Point C Wireless type 11n(2.4GHz) 11n(5GHz) 11n(5GHz) Status access For [WPS(Push button)] (p. 17) (red) : Encrypted access point Quick Start Guide For the information of the highlighted To set manually (p. 68) access point (yellow) To search access points again (blue) 2.
[WPS(Push button)] 1. Press the WPS button on the access point until the light flashes 2. Connect the TV with the access point 6 WPS(Push button) 1) Please press the ‘WPS’ button on the wireless access point until its light flashes. 2) When the light is flashing select ‘Connect’ on TV. Ensure that your access point supports WPS for this setup. WPS: Wi-Fi Protected Setup™ If the connection has failed, check the settings and positions of your access point. And then, follow the on-screen instructions.
Using “VIERA Connect” VIERA Connect is a gateway to the internet services unique to Panasonic. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as videos, games, communication tools, etc. from VIERA Connect home screen. This TV does not support full web browser function and some features of the websites may not be available. 1 Turn power on Press for about 1 second. Mains power On / Off switch should be on. (p.
Watching TV 1 Turn power on Press for about 1 second. Mains power On / Off switch should be on. (p. 10) VIERA Connect introduction banner appears Every time you turn on the TV, this banner appears at the bottom of the screen. You can access to VIERA Connect easily and enjoy the various contents. (p. 18) To remove this banner, leave for about 5 seconds or press any buttons (except the buttons to access VIERA Connect). To set this banner display off [VIERA Connect Banner] (p.
Other useful functions Display Information banner Display Information banner Also appears when changing a channel. 1 2 3 5 6 7 4 Example: DVB HDTV 1 ZDF Bad signal 20:35 All DVB-T Channels Change category C Coronation Street 20:00 - 20:55 2 Info Now 45 Dolby D+ 1 Channel position and name 2 Channel type ([Radio], [Data], [HDTV], etc.
Hold Freeze / unfreeze picture Display the selectable settings for the current status Confirm or change the current status instantly To change select select / change access store [Sub Channel] (DVB) Selects the multifeed programme sub channel (if available) [Multi Audio] (DVB) Selects between alternative language for sound tracks (if available) This setting is not memorised and it will return to the default setting once you exit the current programme.
Aspect Change the aspect ratio (image size) Enjoy viewing the image at its optimum size and aspect. Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV will choose the aspect ratio automatically according to the “Aspect Control Signal” (p. 84).
Using TV Guide TV Guide - Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). This function varies depending on the country you select (p. 14). The postcode entry or update may be required to use the GUIDE Plus+ system depending on the country you select. “View advertisement” (p. 24) DVB-T and Analogue channels are displayed on the same TV Guide screen.
To the previous day (DVB) To the next day (DVB) (red) (green) To view a channel list of the selected type To view a channel list of the selected category (DVB) (blue) (yellow) (Type list) Prog.
Timer Programming (DVB) The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the external recorder. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode. 1 Select the forthcoming programme 2 Select the function ([Ext Rec.] or [Reminder]) select (Timer Programming screen) Timer Programming set Function Ext Rec. LED will turn to orange if Timer Programming is set.
Viewing Teletext Teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FLOF (FASTEXT) mode? In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriate coloured button. This facility enables fast access to information on the subjects shown.
FULL / TOP / BOTTOM (green) (TOP) (BOTTOM) Normal (FULL) (Expand the TOP half) (Expand the BOTTOM half) View in multi window Watch TV and Teletext in two windows at once Select Picture and text on or off (Press twice) Operations can be made only in teletext screen. Viewing Teletext Store frequently viewed pages Store frequently viewed pages in the colour bar (List mode only) As page is displayed press and hold (Corresponding coloured button) The number changes to white.
Watching External Inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input. To connect the equipment (p. 11 - 13, 81 - 82) The remote control is capable of operating the contents or external equipment. (p. 29) 1 Turn the TV on When connecting with SCART (p. 12) Receives input signals automatically when playback starts Input signals are automatically identified by the SCART (pin 8) terminal. This function is also available for HDMI connections (p. 89).
Operating the contents or equipment with the TV remote control You can operate the contents in Media Player / media servers, recording functions or the connected equipment with the below buttons of this TV remote control.
How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. 1 Display icons of the feature 2 Select a feature select access VIERA Link To return to TV or How to Use VIERA TOOLS Follow the operations of each feature [VIERA Link] (p. 76 - 80) [Music] (p. 62) [Photo] (p. 57) [VIERA Connect] (p. 18, 72) [Video] (p. 60) [Media Server] (p. 69) When two or more available devices are connected, a selection screen will be displayed.
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. 1 Display the menu 2 Select the menu Displays the functions that can be set (varies according to the input signal).
Menu list Menu Item Viewing Mode Selects your favourite picture mode for each input [Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Game] [Dynamic]: Improves contrast and sharpness for viewing in a bright room. [Normal]: Normal use for viewing in a normal lighting condition. [Cinema]: Improves the performance of contrast, black and colour reproduction for watching movies in a darkened room. [True Cinema]: Reproduces the original image quality precisely without any revision.
Menu Item Screen Display Adjustments / Configurations (alternatives) Turns the screen off when you select [Off] [Off] / [On] The sound is active even if the screen turns off. Press any buttons (except Standby) to turn the screen on. This function is effective in reducing power consumption when listening to the sound without watching the TV screen.
Menu Sound How to Use Menu Functions 34 Item Adjustments / Configurations (alternatives) Mode Selects your favourite sound mode [Music] / [Speech] / [User] The selected mode affects all input signals. [Music]: Improves sound quality for watching music videos, etc. [Speech]: Improves sound quality for watching news, drama, etc. In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and those settings will be stored for each mode.
Menu Item Adjustments / Configurations (alternatives) SPDIF Selection SPDIF: A standard audio transfer file format Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and HDMI2 (ARC function) terminals [Auto] / [PCM] [Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as Dolby Digital Bitstream. MPEG is output as PCM. [PCM]: Digital output signal is fixed to PCM. For DVB mode or video contents of Media Player / Network services (p.
Menu Network Timer How to Use Menu Functions Adjustments / Configurations (alternatives) Software Update Checks for available software updates from the Panasonic website New Software Message Selects whether to give a notification message when new software is found via network [Off] / [On] Network Status Displays the network status (MAC Address, current network settings, etc.) Timer Programming Sets a timer to record or remind forthcoming programmes (p.
Menu Link Settings Item Adjustments / Configurations (alternatives) Intelligent Auto Standby Makes non-watched or non-used connected equipment go into Standby mode to reduce the power consumption [Off] / [On (With reminder)] / [On (No reminder)] (p. 77) This function is available when [VIERA Link] is set to [On]. Download Downloads channel, language and country / region settings to Q-Link or VIERA Link compatible equipment connected to the TV DVB-C channel setting cannot be downloaded.
Menu Item Language Setup Display Settings How to Use Menu Functions 38 Adjustments / Configurations (alternatives) OSD Language Changes language for on-screen displays Preferred Audio 1/2 Selects the first and second preferred language for DVB multi audio (depending on the broadcaster) Preferred Subtitles 1/2 Selects the first and second preferred language for DVB subtitles (depending on the broadcaster) To display subtitles (p.
Menu Item Adjustments / Configurations (alternatives) Common Interface Sets to watch encrypted channels, etc. (p. 50) DivX® VOD Displays DivX VOD registration code (p. 87) Advance Enables the advanced picture settings [Off] / [On] Set to [On] to display the advanced items in the Picture Menu. (p. 54) Shipping Condition Resets all settings to the original condition (p. 51) System Update Downloads new software to this TV (p.
Retuning from Setup Menu Automatically retune the channels received in the area. This function is available if channel tuning is already performed. Only the selected mode is retuned. All the previous tuning settings are erased. If Child Lock PIN number (p. 49) has been set, the PIN number is required. If tuning has not been done completely [Manual Tuning] (p. 44) DVB-C, DVB-T, Analogue channels 1 Select DVB-C, DVB-T or Analogue 2 Display the menu and select [Setup] (p.
6 Start Auto Setup (Settings are made automatically) DVB-C: DVB-C Auto Setup DVB-C Auto Setup Progress All DVB-C tuning data will be erased 0% This will take about 3 minutes. No. Channel Name CBBC Channel 1 BBC Radio Wales 2 E4 3 Free TV: 3 100% Type Free TV Free TV Free TV Pay TV: 0 Searching Quality 100 100 100 Radio: 0 DVB-T: DVB-T Auto Setup DVB-T Auto Setup CH 5 Progress All DVB-T tuning data will be erased This will take about 3 minutes.
Tuning and Editing Channels You can retune channels or make your favourite channel lists, skip unwanted channels, etc. 1 Select the mode 2 Display the menu and select [Setup] (p. 19) select Setup 3 access Select [DVB-C Tuning Menu], [DVB-T Tuning Menu] or [Analogue Tuning Menu] select DVB-C Tuning Menu DVB-T Tuning Menu Analogue Tuning Menu 4 Access Access Access access The displayed item depends on the selected mode.
To edit Favourites list While the cursor is in the Favourites field to edit To move the channel Select the new position (green) To delete the channel Store (green) or To delete all channels (yellow) To name the Favourites Set characters (maximum 10 characters) Store select User input (red) Name set To use numeric buttons (p. 91) 3 Store Skip unwanted channels, Edit Channels [Channel List] You can hide (skip) unwanted channels.
Set DVB channel manually [Manual Tuning] Normally use [Auto Setup] or [Update Channel List] to retune DVB channels. If tuning has not been done completely or for adjusting the direction of the aerial, use this function. All channels found will be added to the Channel List. DVB-C: 1 Enter the frequency 2 Select [Start scan] DVB-C Manual Tuning Frequency Symbol Rate Service ID Signal Quality Signal Strength No.
Update DVB channel automatically [Update Channel List] You can add new channels, delete removed channels, update channel name and position automatically to the channel list. The channel list is updated while keeping your settings in [Favourites Edit], DVB-T Update Channel List Progress CH 5 69 [Channel List], [Child Lock], etc. This will take about 3 minutes. Depending on the signal condition, the update may not work properly.
Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the external recorder. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode. TV Guide may also be used to set timer programming event (p. 25). This function is not available in Analogue mode. Timer Programming can store up to 15 events.
Set timer programming event details 1 Start making the settings 2 Select the function ([Ext Rec.] or [Reminder]) [Ext Rec.]: Records the programme to the external recorder. When the start time comes, the channel will be switched automatically and the video and audio signals will be output. 2 minutes before the starting time, a reminder message appears if you are watching TV. [Reminder]: Reminds you to watch the programme.
To edit a timer programming event Select the event To change a timer programming event Correct as necessary (p. 47) To delete a timer programming event To record with subtitles (if available) Each time pressed: (yellow) auto off To cancel a timer programming event temporarily Each time pressed: (blue) cancel stop cancelling (red) To unlock the tuner and stop recording Note Timer Programming 48 Check that the LED is orange.
Child Lock You can lock specific channels / AV input terminals and control who watches them. When the locked channel / input is selected, a message appears. Enter the PIN number to watch. 1 Display the menu and select [Setup] select Setup 2 access Select [Child Lock] select Child Lock access Access Control channel audience [Child Lock] 1 Enter the PIN number (4 digits) Enter the PIN number twice at first setting. Make a note of the PIN number in case you forget it.
Using Common Interface The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. This function may not be available in some countries or regions. Video and audio signals may not be output depending on broadcasts or services. Although CI module may enable you to view some services, this TV does not guarantee all services (e.g. encrypted pay-TV channels). Please use only the approved CI module by the broadcaster.
Shipping Condition Resets the TV to its original condition, i.e. no channels tuned in. All settings are reset (channels, picture, sound settings, etc.). To retune TV channels only, e.g. after moving house “Retuning from Setup Menu” (p.
Updating the TV Software A new version of software may be released for download to enhance the performance or operations of the TV. If there is an update available, a notification message is displayed when the channel has the update information. To download (Press the EXIT button not to download) You can update new software automatically or update manually.
Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. To connect PC (p. 82) 1 Select the external input 2 Select [PC] select Input Selection AV1 AV2 PC HDMI1 HDMI2 HDMI3 HDMI4 TV SD Card/USB access Corresponding signals (p. 90) If [H-freq.] or [V-freq.] is shown in red, the signals may not be supported. PC menu setting To make settings Menu “How to Use Menu Functions” (p.
Advanced Picture Settings You can adjust and setup the detailed picture settings for each input and Viewing Mode. To use this function completely, set [Advance] to [On] in the Setup Menu. (p. 39) For PC input mode, some functions are available without setting [Advance]. 1 Select the input mode to adjust and setup 2 Display the menu and select [Picture] (p.
Using Media Player Media Player allows you to enjoy photo, video or music recorded on SD Card and USB Flash Memory. VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an SD Card on the TV screen by simply inserting into the SD Card slot. Photo mode: Still pictures recorded by digital cameras will be displayed. Video mode: Moving pictures recorded by digital video cameras will be played back. Music mode: Digital music data will be played back.
Starting Media Player 1 Insert the SD Card or USB Flash Memory to the TV 2 Confirm the message and start Media Player (p. 55) You can also start by pressing following button. “Watching External Inputs” (p. 28) 3 Select the device to access Drive Select EXIT Select RETURN Access SD Card USB Drive... select access USB Flash... SD Card If two or more devices are not connected, this step will be skipped.
Change the contents You can switch to the other mode of Media Player from the thumbnail view. The mode can be switched in the current device. 1 While the thumbnail is displayed, display the contents selection 2 Select the contents Contents Select EXIT Select RETURN Access (blue) Photo Video select access Music SD Card Photo mode Photo mode will read all “.jpg” extension files in the SD Card or USB Flash Memory. The thumbnail of all the photos in the SD Card or USB Flash Memory will be displayed.
To sort by folder, recorded date or recorded month 1 Display the view selection in the thumbnail view (green) 2 Select the sort type [Folder view]: Displays the thumbnail grouped by folder. The files which are not into a folder will be collected to the folder named “/”. [Sort by Date] / [Sort by Month]: Displays the thumbnail grouped by the same date or month. The group of the photos without a recorded date is shown as [Unknown].
Menu Item Adjustments / Configurations (alternatives) Slideshow Settings Transition Effect Selects the transition effect for switching the photo during the slideshow [Off] / [Fade] / [Slide] / [Dissolve] / [Motion] / [Random] [Fade]: The next photo fades in gradually. [Slide]: The next photo slides and appears from the left side. [Dissolve]: Each photo is dissolved when switching to the next photo. [Motion]: Each photo is displayed with an effect of enlarging, reducing, moving up or moving down.
Video mode ? X!& X " (p. 85, 86) * *?"%$ !& X ! ! & !$ * Z& * " # >!&& % ! & # < ] " & *?"%$ !& [ Ã ! & ! >Ä Media Player Video Title view * ! > >!&& >* $ * ! & $ ! *!'*&!'* !X ! ? ! >< ? $ XX * ! > Trip1 Trip2 Trip3 Trip4 Trip5 Room Nature1 “Video Setup” (p.
Video Setup ? * !$' X ! " < $? ! " $ & %& ! $ # $ !$' $ * $ $ < 1 Display the option menu 2 Select [Video Setup] 3 Select the items and set & Option Menu ! ? Menu Item Adjustments / Configurations (alternatives) Video Setup * ! > X * ! & $ !$ * *?"%$ !& ! > [Off] / [On] " ' " # $ % ! & # X $ !$ $ !$ * *?"%$ !& ! >< * ! > Ã XXÄ & *! < $
Music mode ? X!& X " (p.
Using Network Services (DLNA / VIERA Connect) DLNA® This TV is a DLNA Certified™ product. DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network. To learn more, visit www.dlna.org. It allows you to share photos, videos and music stored in the DLNA Certified media server (for example, PC with Windows 7 installed, DIGA Recorder etc.) connected to your home network, and enjoy the contents on the TV screen.
Network connections To use only DLNA features, you can operate the features without broadband network environment. To use VIERA Connect features, you need a broadband network environment. If you do not have any broadband network services, please consult your retailer for assistance. Set up and connect any equipment required for the network environment. You cannot make settings for the equipment on this TV. Read the manual of the equipment. Required speed (effective): at least 1.
Network Setup Ensure the connections are completed before starting Network Setup. “Network connections” (p. 64) 1 Display the menu and select [Network] select Network access Network Link settings Sets the link settings to control this TV from the network equipment via the network.
Wired connection settings This setting is for the network connection by using the LAN cable. 1 Select [Network Connection] and set to [Wired] select Connection Test Wired Network Connection Wireless Network Settings IP/DNS Settings Network Link Settings Software Update New Software Message On Network Status access / store If you make the network connection like “Example 2” (p. 64), you do not have to set [Acquire DNS Address], [Proxy] and [Proxy Port].
4 Select [Connection Test] and access to test select Connection Test Access access Performs automatic testing of the network connection for the TV. (It takes a while to test.) Connection Test Check network cable connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection. Check server connection. : succeeded The test is successful and the TV is connected to the network. : failed Check the settings and connections. And then select [Retry].
5 Enter the encryption key of the access point Set characters Wireless Network Settings Encryption key A B C D E F G H U V W X Y Z 0 I J K L M N O P Q R S T 1 2 3 4 5 6 7 8 9 ! : a b c d e f g h i j k l m n o p q r s t u v w x y z ( ) + - . * _ @ / “ ‘ % & ? , ; = $ [ ] ~ < > { } | ` ^ \ Store select # set You can set characters by using numeric buttons. After settings, return to the previous menu.
Using DLNA® features Ensure the preparation of the media server, network connections and network settings are completed. “Media server” (p. 63), “Network connections” (p. 64), “Network Setup” (p.
[Slideshow] - Slideshow completes when all photos are viewed within the list. 1 Select the photo file from the list for the first view 2 Start Slideshow (red) To display / hide the operation guide To pause (return to Single view) To return to list For video file Playback - Playback will start. If you stopped the last playback on the way, the confirmation screen is displayed to select whether to start from where you stopped last time or from the beginning.
Option menu for each content Setup the settings for Photo, Video and Music file operations.
Audio output settings (for video contents) You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function) terminal.
Link Functions (Q-Link / VIERA Link) Q-Link connects the TV and DVD Recorder / VCR, and enables easy recording, playback, etc. (p. 75) VIERA Link (HDAVI Control™) connects the TV and the equipment with VIERA Link function, and enables easy control, convenient recording, playback, energy saving, creating home theatre, etc., without complicated setting. (p. 76 - 80) You can use Q-Link and VIERA Link functions together. This TV supports “HDAVI Control 5” function.
VIERA Link (HDMI and Audio out connections) Connected equipment Features Preset download Easy playback Power on link Power off link Reduce unnecessary power consumption in Standby Auto standby for unnecessary equipment Pause Live TV programme Direct TV Recording Control the menu of the connected equipment by VIERA remote control Speaker control Blu-ray Disc theatre with VIERA Link function – Player theatre with VIERA Link function – 6 – 3 7 6 – – – 3 – 3 – – 7 – – 1 Amplifier with VIERA Link fu
Q-Link Preparations Connect the DVD Recorder / VCR with the following logos: “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC (a trademark of Metz Corporation)”, “Easy Link (a trademark of Philips Corporation)”, “Megalogic (a trademark of Grundig Corporation)”, “SMARTLINK (a trademark of Sony Corporation)” Q-Link connection (p. 73) Use fully wired SCART cable. Set up the DVD Recorder / VCR. Read the manual of the recorder. Q-Link terminal setup in the Setup Menu [AV1 out] (p.
VIERA Link “ ” Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 5” function. Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically (p. 73, 74). These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.
Reduce unnecessary power consumption in Standby [Standby Power Save] Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 36) The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronisation with the TV on / off state to reduce the consumption. When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power consumption of the connected equipment is automatically minimised.
Pause Live TV programme [Pause Live TV] You can pause the current TV programme and resume later. The current TV programme will be recorded on HDD of the connected DIGA Recorder. This function is available with a DIGA Recorder which has HDD. If you connect a variety of recorders including other manufacturers’ recorders at the same time, connect the DIGA Recorder which has HDD to the TV’s lower HDMI terminal number.
2 Select [VIERA Link Control] Pause Live TV Direct TV Rec VIERA Link Control Speaker Selection 3 select VIERA Link Menu Start Start Recorder Home Cinema access Select the equipment to access Select the type of the connected equipment and access.
Speaker control [Speaker Selection] You can control the theatre speaker with this TV remote control pointing at the TV’s signal receiver. If you cannot operate, check the settings and the equipment. “Summary of Q-Link and VIERA Link features” (p. 73, 74), “Preparations” (p.
External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the basic connection (p. 11 - 13), the table (p. 83), and the specifications (p. 97 - 98).
Network (wired) Internet LAN cable (Shielded) Modem Hub or Router Rear of the TV Headphones (M3 stereo mini plug) To adjust volume [Headphone Volume] (p.
Types of connectable equipment to each terminal Terminal AV2 USB 1 - 2 HDMI 1 - 4 ETHERNET DIGITAL AUDIO OUT VIDEO 1 COMPONENT AV1 Features 1 To record / playback videocassettes / DVDs (VCR / DVD Recorder) To watch satellite broadcasts (Set top box) 2 To watch DVDs (DVD Player) To watch camcorder images (Video camera) To play games (Game equipment) To use amplifier with speaker system 3 To use network services 4 Q-Link (with HDMI) Direct TV Recording : Recommended Connection 1: To connect
Technical Information Auto Aspect The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 22) Aspect Control Signal [WIDE] will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI terminal is found. The aspect will switch to the appropriate 16:9 or 14:9 widescreen ratio. This function will work in any aspect mode.
Supported file format in Media Player and media servers Photo Format JPEG File extension Image resolution (pixel) .jpeg 8×8 to 30,719 × 17,279 File extension Video codec .jpg Details / Restrictions DCF and EXIF standards Sub-sampling: 4:4:4, 4:2:2, 4:2:0 Progressive JPEG is not supported. Video Container Audio codec Details / Restrictions AVCHD .mts H.264 Dolby Digital AVCHD Standard Ver. 2.
Container File extension Video codec Audio codec Details / Restrictions .asf .wmv DivX3 DivX4 DivX5 DivX6 MPEG4 SP/ASP VC-1 Windows Media Video Ver. 9 AAC Dolby Digital Dolby Digital Plus HE-AAC LPCM MP3 WMA WMA Pro Copy-protected files cannot be played back. MP4 .f4v .m4v .mp4 DivX3 DivX4 DivX5 DivX6 H.264 BP/MP/HP MPEG1 MPEG2 MPEG4 SP/ASP AAC Dolby Digital Dolby Digital Plus HE-AAC MPEG Audio MP3 This TV supports this container recorded by Panasonic products.
DivX DivX Certified® to play DivX® and DivX Plus® HD (H.264/MKV) video up to 1080p HD including premium content. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
Devices for recording or playing back SD Card 2.1 mm Card format: SDXC Card - exFAT SDHC Card / SD Card - FAT16 or FAT32 Compliant card type (maximum capacity): SDXC Card (64 GB), SDHC Card (32 GB), SD Card (2 GB), miniSD Card (2 GB) (requiring miniSD adaptor) If miniSD Card is used, insert / remove it together with the adaptor. Check the latest information on the card type at the following website. (English only) http://panasonic.jp/support/global/cs/tv/ Use an SD Card which meets SD standards.
HDMI connection HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. HDMI-compatible equipment 1 with an HDMI or DVI output terminal, such as a DVD player, a set top box or game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
Gamepad Check the gamepads that have been tested for the performance with this TV at the following website. (English only) http://panasonic.jp/support/global/cs/tv/ Some of the keys of gamepads correspond to the operation of the remote control.
Characters table for numeric buttons You can enter characters by using numeric buttons for free input items. Press the numeric button repeatedly until you reach the User input desired character. Name A B C D E F G H U V W X Y Z I J K L M N O P Q R S T 0 1 2 3 4 5 6 7 8 9 ! : # a b c d e f g h i j k l m n o p q r s t u v w x y z ( ) + - . * _ The character is set automatically if you leave for 1 second.
FAQs Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Block noise, frozen or disappearing image occurs in DVB mode / White spots or shadow image (ghosting) occurs in Analogue mode / Some channels cannot be tuned Check the position, direction and connection of the aerial. Check [Signal Condition] (p. 45).
Problem Causes / Actions Screen Sound HDMI Set [P-NR] in the Picture Menu to remove noise. (p. 32) Check nearby electrical products (car, motorcycle, fluorescent lamp). No image can be displayed Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum? (p. 32) Check the setting of [AV2] ([COMPONENT] / [VIDEO]) in [Input Selection] to match the output of the external equipment. (p. 28) Blurry or distorted image (no sound or low volume) Reset channels.
Problem Other FAQs 94 Causes / Actions The TV does not switch on Check the mains lead is plugged into the TV and the socket outlet. The TV goes into Standby mode Auto power standby function is activated. (p. 10) The TV enters Standby mode about 30 minutes after analogue broadcasting ends. The remote control does not work or is intermittent Are the batteries installed correctly? (p. 7) Has the TV been switched on? The batteries may be running low. Replace them.
Maintenance First, remove the mains plug from the socket outlet. Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints. For stubborn dirt: First clean the dust on the surface. Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Wring the cloth and wipe the surface. Finally, wipe away all the moisture.
This product incorporates the following software or technology: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software based in part on the work of the Independent JPEG Group, (4) the software developed by the FreeType Project, (5) the software licensed under the GNU LESSER GENERAL PUBLIC LICENSE (LGPL) and/or, (6) open sourced software other than the software licensed under the LGPL.
Specifications Model No. TX-L32E5E TX-L37E5E TX-L42E5E TX-L47E5E Power source AC 220-240 V, 50 / 60 Hz Panel LED LCD panel Dimensions (W × H × D) 764 mm × 519 mm × 230 mm (With Pedestal) 764 mm × 473 mm × 52 mm (TV only) 874 mm × 581 mm × 238 mm (With Pedestal) 874 mm × 534 mm × 52 mm (TV only) 997 mm × 650 mm × 247 mm (With Pedestal) 997 mm × 604 mm × 52 mm (TV only) 1,107 mm × 712 mm × 268 mm (With Pedestal) 1,107 mm × 666 mm × 52 mm (TV only) Mass 11.0 kg Net (With Pedestal) 9.
AV1 input / output SCART (Audio/Video in, Audio/Video out, RGB in, Q-Link) VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 :) AV2 input (COMPONENT / VIDEO) AUDIO L - R RCA PIN Type × 2 0.5 V[rms] Y PB, PR 1.0 V[p-p] (including synchronisation) ±0.35 V[p-p] Connection terminals HDMI 1 / 2 / 3 / 4 input TYPE A Connectors HDMI1 / 3 / 4: Content Type HDMI2: Content Type, Audio Return Channel This TV supports “HDAVI Control 5” function. PC HIGH-DENSITY D-SUB 15PIN R,G,B: 0.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.