Model No. English TX-L32ET5E TX-L37ET5E TX-L42ET5E TX-L47ET5E TX-L55ET5E Nederlands Operating Instructions LCD Television Contents Be Sure to Read Safety Precautions ······································ 2 Quick Start Guide For more detailed instructions, refer to the Operating Instructions on the CD-ROM. To view the Operating Instructions on the CD-ROM, you need a computer equipped with a CD-ROM drive, and Adobe® Reader® (Version 8.0 or later is recommended) installed on your computer.
Safety Precautions Warning English Handling the mains plug and lead ● Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.) ● Ensure that the mains plug is easily accessible. ● Do not touch the mains plug with a wet hand. This may cause electrical shock. ● Do not use any mains lead other than that provided with this TV. This may cause fire or electrical shock. ● Do not damage the mains lead, damaged lead may cause fire or electrical shock.
Radio waves English ● Do not use the TV in any medical institutions or locations with medical equipment. Radio waves from the TV may interfere with the medical equipment and cause accidents due to the malfunction. ● Do not use the TV near any automatic control equipment such as automatic doors or fire alarms. Radio waves from the TV may interfere with the automatic control equipment and cause accidents due to the malfunction.
Accessories Standard accessories English Remote Control ● N2QAYB000752 Batteries for the Remote Control (2) ● R6 (see below) Terminal adaptors ● AV1 (SCART) adaptor (p. 8) Pedestal (see below) Mains lead (p. 8) Clamper (p. 10) 3D Eyewear (4) (p. 15) Operating Instructions ● AV2 (COMPONENT / VIDEO) adaptor Pan European Guarantee Card ● Accessories may not be placed all together. Take care not to throw them away unintentionally.
Assembly screw (4) Bracket ● TBL5ZA32911 (TX-L32ET5E) ● TBL5ZA32831 (TX-L37ET5E) ● TBL5ZA32921 TX-L42ET5E TX-L47ET5E TX-L55ET5E ( M5 × 15 Assembly screw (4) English Ensure that the TV does not fall over. ● If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury may result. Two or more people are required to install and remove the TV. ● If two or more people are not present, the TV may be dropped, and personal injury may result.
Identifying Controls Remote Control English 8 OK 1 2 3 4 5 6 7 16 8 21 9 22 10 11 12 23 24 17 18 19 9 20 10 11 12 13 13 14 14 25 15 26 15 16 17 27 18 19 20 21 22 1 Standby On / Off switch 2 3 4 5 6 7 6 ● Switches TV on or off standby. 3D button ● Switches the viewing mode between 2D and 3D. [Main Menu] ● Press to access Picture, Sound, Network, Timer and Setup Menus. Aspect ● Changes aspect ratio. Information ● Displays channel and programme information.
Indicator / Control panel 1 Function select 1 2 3 5 6 English ● [Volume] / [Contrast] / [Brightness] / [Colour] / [Sharpness] / [Tint] (NTSC signal) / [Bass]∗ / [Treble]∗ / [Balance] / [Auto Setup] ∗[Music] or [Speech] mode in the Sound Menu 2 Channel Up / Down, Value change (when using the F button), Switching the TV on (press either button for about 1 second when in Standby mode) 3 Changes the input mode 4 Mains power On / Off switch ● Use to switch the mains power.
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
■ DVD Recorder / VCR and Set top box TV English Set top box HDMI cable TV Terrestrial aerial AV1 (SCART) adaptor∗ SCART cable RF Cable SCART cable RF cable DVD Recorder / VCR ∗Supplied with this TV ■ Player / 3D compatible player TV Player / 3D-compatible player HDMI cable Note ● Connect to the TV’s AV1 for a DVD Recorder / VCR supporting Q-Link. ● Please also read the manual of the equipment being connected. ● Keep the TV away from electronic equipment (video equipment, etc.
Using clamper ■ Clamper (Standard accessory) Attach the clamper Bundle the cables hole English Insert the clamper in a hole Set the tip in the hooks hooks To remove from the TV: To loosen: snaps ● Do not bundle the RF cable and mains lead together (could cause distorted image). ● Fix cables with clampers as necessary. ● When using the optional accessory, follow the option’s assembly manual to fix cables.
4 Select the mode to tune select TV Signal Selection DVB-C DVB-T Analogue Start Auto Setup : tune (search for the available channels) : skip tuning English 5 tune / skip tuning Select [Start Auto Setup] select TV Signal Selection DVB-C DVB-T Analogue Start Auto Setup access ● Auto Setup will start to search for TV channels and store them. The stored channels and sorted channel order vary depending on the country, area, broadcasting system and conditions of signal reception.
6 Setup the network connection English Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 14). ● Please note that this TV does not support wireless public access points. ● Ensure the network connections (p. 9) and network environment are completed before starting setup. Select the network type [Wired] “Wired connection” (p. 9) Network Setup [Wireless] “Wireless connection” (p.
6 4. After the access point setting is finished, perform the connection test Connection Test 5. Go to the next step (Press twice) : succeeded The test is successful and the TV is connected to the network. : failed Check the settings and connections. And then select [Retry]. ● To set manually, select [Manual] and set each item. English Check wireless network connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection. Check server connection.
Using “VIERA Connect” English VIERA Connect is a gateway to the internet services unique to Panasonic. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as videos, games, communication tools, etc. from VIERA Connect home screen. ● This TV does not support full web browser function and some features of the websites may not be available. 1 Turn power on ● Press for about 1 second. ● Mains power On / Off switch should be on. (p.
Viewing 3D images English You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear. “Standard accessories” (p. 4) This TV supports [Frame Sequential]∗1, [Side by Side]∗2 and [Top and Bottom]∗3 3D formats. ∗1: The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately played back. ∗2, ∗3: Other available 3D formats ● How to view the 3D images (p.
Storing and cleaning the 3D Eyewear English ● Clean using a soft, dry cloth. ● Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may scratch the eyewear. Shake off any dust from the cloth before use. ● Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off. ● Do not dunk the 3D Eyewear in liquid such as water when cleaning. ● Avoid storing the 3D Eyewear in hot or highly humid locations.
■ To change 3D format manually When the image is not changed properly using [3D], [2D] or [2D During the above operation select 3D Mode Selection (Manual) Original Frame Sequential - 3D Frame Sequential - 2D Side by Side - 3D Side by Side - 2D Top and Bottom - 3D Top and Bottom - 2D 2D 3D English (red) 3D] mode, use this manual setting.
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. English 1 Display the menu 2 Select the menu ● Displays the functions that can be set (varies according to the input signal).
Maintenance First, remove the mains plug from the socket outlet. For stubborn dirt: First clean the dust on the surface. Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Wring the cloth and wipe the surface. Finally, wipe away all the moisture. English Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints.
Information for Users on Collection and Disposal of Old Equipment and used Batteries English These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
Modelnr. Nederlands TX-L32ET5E TX-L37ET5E TX-L42ET5E TX-L47ET5E TX-L55ET5E Gebruiksaanwijzing LCD-televisie Inhoudsopgave Belangrijke informatie Veiligheidsmaatregelen ······························· 2 Quick Start-handleiding Raadpleeg de bedieningsinstructies op de cd-rom voor gedetaileerdere instructies. Als u de bedieningsinstructies op de cd-rom wilt bekijken, hebt u een computer nodig met cdromdrive plus Adobe® Reader® (bij voorkeur versie 8.0 of hoger).
Veiligheidsmaatregelen Waarschuwing De stekker en het netsnoer Nederlands ● Steek de stekker van het netsnoer volledig in het stopcontact. (Als de stekker niet goed vast zit, kan dit warmte opwekken, waardoor brand kan ontstaan.) ● Zorg voor een makkelijke toegang naar de stekker van de voedingskabel. ● Raak de stekker nooit met vochtige handen aan. Dit kan elektrische schokken tot gevolg hebben. ● Gebruik geen ander netsnoer dan het netsnoer dat u bij deze tv hebt ontvangen.
Radiogolven ● Gebruik de tv niet in een medische inrichting of een andere plaats met medische apparatuur. De radiogolven van de tv kunnen interfereren met de medische apparatuur en storing en ongevallen veroorzaken. ● Gebruik de tv niet nabij automatische controleapparatuur zoals een automatische deur of brandalarm. De radiogolven van de tv kunnen interfereren met de controleapparatuur en storing en ongevallen veroorzaken.
Accessoires Standaardaccessoires Afstandsbediening ● N2QAYB000752 Batterijen voor de afstandsbediening (2) ● R6 (zie hierna) Nederlands Adapteraansluitingen ● AV1 (SCART) adapter (p. 8) Standaard (zie hierna) Netsnoer (p. 8) Kabelklem (p. 10) 3D-bril (4) (p. 15) Gebruiksaanwijzing ● AV2 (COMPONENT / VIDEO) adapter Europese Garantie ● De accessoires mogen niet allemaal samen worden geplaatst. Zorg dat u ze niet per ongeluk weggooit.
Zorg dat de tv niet kan omvallen. ● Als u tegen de tv stoot of kinderen op de vloerstandaard klimmen terwijl de tv erop is bevestigd, kan de tv omvallen, met mogelijk persoonlijk letsel tot gevolg. Het installeren en verwijderen van de tv dient door minimaal twee personen te worden uitgevoerd. ● Als dit niet door minimaal twee personen wordt uitgevoerd, bestaat de kans dat de tv komt te vallen, met mogelijk persoonlijk letsel tot gevolg.
Bedieningsonderdelen Afstandsbediening 8 OK Nederlands 1 2 3 4 5 6 7 16 8 21 9 22 10 11 12 23 24 12 14 25 14 15 26 15 16 17 18 19 20 9 10 11 13 13 27 17 18 19 20 21 1 Stand-bytoets 2 3 4 5 6 7 6 ● Zet de tv in stand-by of haalt de tv uit stand-by. 3D-toets ● Schakelt over tussen de 2D- en 3D-stand. [Hoofdmenu] ● Geeft toegang tot de menu’s Beeld, Geluid, Netwerk, Timer en Instellingen. Beeldverhouding ● Wijzigt de beeldverhouding.
Indicator/Bedieningspaneel 1 Functie selecteren 1 2 3 5 6 4 7 Achterzijde van de tv 7 Voedings- en timerlampje Rood: Stand-by Groen: Aan Oranje: Timer programmeren aan Oranje (knipperend): Er is een opname bezig met Timer programmeren of Directe TV-opname Rood met oranje knipperend: Standby van Timer programmeren of Directe TV-opname ● Het lampje knippert wanneer de tv een opdracht van de afstandsbediening ontvangt.
Basisaansluitingen De afgebeelde externe apparatuur en kabels worden niet bij de tv meegeleverd. Zorg ervoor dat de stekker van de tv niet in het stopcontact zit als u kabels aansluit of loskoppelt.
■ DVD-/videorecorder en set-top box TV Set-top box HDMI-kabel TV Aardse antenne SCART-kabel RF-kabel SCART-kabel RF-kabel Nederlands AV1-adapter (SCART)∗ DVD-/videorecorder ∗Meegeleverd bij de tv ■ Speler/3D-compatibele speler TV Speler/3D-compatibele speler HDMI-kabel Opmerking ● Sluit een DVD-recorder/videorecorder met Q-Link-ondersteuning aan op AV1 van de tv. ● Lees ook de handleiding van het apparaat dat moet worden aangesloten.
Gebruik van de kabelklem ■ Kabelklem (Standaardaccessoire) Bevestig de kabelbinder opening Bundel de kabels Steek de kabelbinder in de opening geleiders Nederlands Van de tv verwijderen: Schuif de punt onder de geleiders Losmaken: ontgrendelknoppen ● Bundel de RF-kabel en het netsnoer niet samen (dat kan beeldstoring veroorzaken). ● Zet kabels waar nodig met klemmen vast. ● Volg bij gebruik van optionele accessoires de handleiding bij de accessoire voor informatie over het bevestigen van kabels.
4 Selecteer de stand waarin u wilt afstemmen selecteren TV-signaal kiezen DVB-C DVB-T Analoog Start auto set-up 5 afstemmen / afstemmen overslaan : afstemmen (beschikbare kanalen zoeken) : afstemmen overslaan Selecteer [Start auto set-up] selecteren TV-signaal kiezen openen ● De tv-kanalen worden automatisch gezocht en opgeslagen. De opgeslagen kanalen en de sorteervolgorde ervan verschillen afhankelijk van het land, het gebied, het zendsysteem en de ontvangstkwaliteit.
6 Stel de netwerkverbinding in Breng de netwerkverbinding tot stand om netwerkservices zoals VIERA Connect in te schakelen (p. 14). ● Deze televisie ondersteunt geen draadloze publieke toegangspunten. ● Zorg dat de netwerkverbindingen (p. 9) en de netwerkomgeving voltooid zijn voordat u met de instelling begint. Selecteer het type netwerk [Bedraad] “Bekabelde verbinding” (p. 9) Netwerkinstelling [Draadloos] “Draadloze verbinding” (p.
6 4. Nadat het toegangspunt is ingesteld, moet u de verbinding testen Verbindingstest Draadloze netwerkverbinding controleren. Verkregen IP-adres controleren. Controleer op apparaten met hetzelfde IP-adres. Verbinding met gateway controleren. Communicatie met server controleren. 5. Ga naar de volgende stap (Twee keer indrukken) : geslaagd De test is geslaagd en de tv is verbonden met het netwerk. : mislukt Controleer de instellingen en de verbindingen. Selecteer vervolgens [Probeer opnieuw].
VIERA Connect VIERA Connect is een gateway voor unieke internetdiensten van Panasonic. Met VIERA Connect hebt u toegang tot geselecteerde websites die door Panasonic worden ondersteund en kunt u video’s, games, communicatieprogramma’s enz. op internet gebruiken via het beginscherm van VIERA Connect. ● De tv ondersteunt niet alle webbrowserfuncties en sommige functies van websites kunnen mogelijk niet gebruikt worden. 1 Schakel de tv in ● Houd de knop ongeveer 1 seconde ingedrukt.
3D-beeld weergeven U kunt genieten van het bijzondere effect van 3D-beeld en -programma’s door een 3D-bril te dragen. “Standaardaccessoires” (p. 4) Deze tv ondersteunt de 3D-formaten [Frame Sequential]∗1, [Zij aan Zij]∗2 en [Boven en Onder]∗3. ∗1: 3D-formaat waarbij de beelden voor het linker- en rechteroog zijn opgenomen in HD-kwaliteit (High Definition) en afwisselend weergegeven worden. ∗2, ∗3: Andere ondersteunde 3D-formaten ● Naar 3D-beeld kijken (p.
De 3D-bril opbergen en reinigen ● Reinig de bril met een zachte, droge doek. ● Als u de 3D-bril reinigt met een zachte doek waaraan zich stof of vuil heeft gehecht, kunt u de bril krassen. Verwijder eerst het stof van de doek. ● Gebruik geen benzeen, verdunner of was op de 3D-bril, omdat de verf anders kan afbladderen. ● Dip de 3D-bril bij het reinigen niet in een vloeistof, zoals water. ● Bewaar de 3D-bril niet op een zeer warme of vochtige plaats.
■ Het 3D-formaat handmatig wijzigen Als het beeld niet correct wordt weergegeven met [3D], [2D] of [2D Tijdens de genoemde situatie 3D], kunt u het handmatig instellen.
Werken met de menufuncties U kunt via verschillende menu’s instellingen voor beeld, geluid en andere functies aanpassen. 1 Geef het menu weer 2 Selecteer het menu ● De instelbare functies worden weergegeven (afhankelijk van het ingangssignaal). selecteren Hoofdmenu Nederlands openen Beeld Geluid Netwerk Timer Instellingen Selecteer het onderdeel 3 Beeld Instelling Kontrast Helderheid Kleur Scherpte Tint Kleurtemp.
Onderhoud Verwijder eerst de stekker van het netsnoer uit het stopcontact. Beeldscherm, Behuizing, Standaard Regelmatig onderhoud: Veeg de buitenkant van het beeldscherm, de behuizing of de standaard voorzichtig af met een zachte doek om vuil of vingerafdrukken te verwijderen. Voor hardnekkig vuil: Verwijder eerst het stof aan de buitenkant. Bevochtig een zachte doek met schoon water of een opgelost neutraal schoonmaakproduct (1 deel schoonmaakproduct op 100 delen water).
Informatie voor gebruikers betreffende het verzamelen en verwijderen van oude uitrustingen en lege batterijen Nederlands Deze symbolen op de producten, verpakkingen, en/of begeleidende documenten betekenen dat gebruikte elektrische en elektronische producten en batterijen niet met het algemene huishoudelijke afval gemengd mogen worden.