Operating Instructions

20
Shipping condition
Press the MENU button.
Move to Setup menu.
Access Setup menu.
Move to Shipping condition.
Access Shipping condition.
Press the OK button to start.
Press again, to con rm, each time that you are asked, “Are you sure?”.
Switch the TV off at the mains power switch.
The next time you switch the TV on, Auto setup will begin. Analogue
stations will be located, sorted and stored ready for use. See page 7.
Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in.
This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to your
new local stations.
Note:
Owner ID information will not be affected by this function.
This can be done either through the Shipping condition menu or through the Auto setup menu.
The Shipping condition menu will reset all data, except Owner ID information, clearing all Analogue tuning information
and resetting all control levels back to factory settings.
You may need to adjust your VCR or programme position ‘0’ VCR after operating the Shipping condition menu.
All tuning data will be erased
Are you sure ?
Are you sure ?
Shipping condition
Exit
Return
Start
MENU
OK
TV
N
123
456
789
0
OK
C
Control with HDMI
AV1 out
On
Monitor
Q-Link
AV2 out
Off timer
Tuning menu
Owner ID
Setup menu
AV2
Monitor
Off
Power on preference
TV
Access
Teletext
FASTEXT
Shipping condition