Instruction Book

MENU
28
Owner I.D. allows you to enter a security code and address information so that in
the unfortunate event of theft it will help the Police to determine the owner.
If the Owner I.D. information was not entered after Auto setup or it is necessary to alter some of the I.D.
information it can be re-- accessed via the Setup menu (In both Analogue and DVB modes).
Open the Main menu
Move to Setup menu
Access Setup menu
Move to Owner I.D.
Access Owner I.D.
If the Owner I.D. has previously
been set, enter the PIN NUMBER
(using 0 to 9 on the remote control)
followed by OK to proceed, this will
take you to the NAME option.
If no Owner I.D. has previously
been set, enter your own 4
digit Owner I.D. PIN NUMBER
(using 0 to 9 on the remote control).
If a 4 digit PIN NUMBER was entered
above, you will be taken automatically
to the NAME line.
If not, move to the NAME line
Change character
Repeat above until NAME, HOUSE
NUMBER and POSTCODE are
entered. Press the OK button to store
the details. Press again when you are
asked, “Are you sure?”
SETUP MENU -- OWNER I.D.
You now have the opportunity
to enter your details and
help the police crack crime
see instruction book
Setup menu
Q--Link AV1
Control with HDMI On
AV1 out Monitor
AV2 out DVB
Off timer Off
Power on preference AV
DVB Setup Menu
Owner ID Access
Shipping condition
Select
Access
Exit
Return
Owner ID
PIN NUMBER: ****
NAME: *******************
HOUSE NO: ***************
POSTOCODE: **************
Change character
Select character
Exit
Return
Store Owner ID
0123456789