Instruction Book

43
TELETEXT OPERATION (DVB Mode)
DVB teletext services differ greatly from analogue teletext. When you switch to a DVB teletext service, the images you see can
contain graphics and text, laid out and controlled in a manner decided by the broadcaster. In all cases, it is possible to navigate
the pages using buttons on the remote control, but because the commands available must apply to all manufacturers of DVB
equipment, some on ---screen commands may not correspond exactly to the remote control buttons. For example:
D For the on---screen command ‘select’or‘go’, use the OK button (1).
D If you see the
A"BYsymbols, use the appropriate CURSOR keys (2).
D If you see a line of key words displayed in red, green, yellow and blue, use the coloured multifunction buttons (3) to operate
the functions.
D For numbered options, use the numeric keypad (4).
D The TV/TEXT button (5) should allow you to exit the teletext system. Alternatively, press the CHANNEL UP / DOWN buttons
(6) to select another channel.
DVB teletext services
‘Cursor keys’
‘Left/Right’
Up/Down
‘Select’
‘Go’, ‘OK’
Coloured Keywords Numbered options
As soon as you switch to a DVB channel with links to a teletext service, software is downloaded in the background to enable the teletext
function. This means that when switching to a DVB channel, you should wait for approximately 5 seconds before pressing the
TV/TEXT button (5) --- this will allow the software to download. If you press the TV/TEXT button (5) before download is complete,
there will be a short delay before the text screen is displayed.
While navigating DVB teletext, you will find there is a short delay when moving between pages while the page downloads.
There is often a prompt shown somewhere on the page (for example “Loading”) to let you know that this is happening.
(1) (2) (3) (4) (5) (6)
Return to TV mode
TEXT